Project '86 - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dv8customs · 04-22-2011, 11:52 AM

That's my buddies crew cab bodied on 22's.

The little Toyota is bodied also

*87 chevy silverado* · 04-22-2011, 11:59 AM

wat kinda v8 is in the yota??

WillieloRidez · 04-22-2011, 12:02 PM

that crew is sweet as well! i bet those are the wheels that u had for mock up?

justpball · 04-22-2011, 01:16 PM

My buddy built the yota, 350 in it.
Posted via Mobile Device

dv8customs · 04-22-2011, 04:53 PM

Quote:

Originally Posted by 87 chevy silverado

wat kinda v8 is in the yota??

Quote:

Originally Posted by justpball

My buddy built the yota, 350 in it.
Posted via Mobile Device

That Yota still looks the same as the day he got it. He has a super charger for it and plans to redo the whole thing soon.

Quote:

Originally Posted by WillieloRidez

that crew is sweet as well! i bet those are the wheels that u had for mock up?

Yep that is them, we suicided the rear doors on it too.

Another buddy of mine had just picked up this Envoy and he let me borrow it to pull the Why-Wear? trailer. It lays frame on 24's

6772owner · 04-22-2011, 07:41 PM

That Envoy is sick!

bigblock73 · 04-22-2011, 09:35 PM

Quote:

Originally Posted by dv8customs

Is it my eyes, or does your roof have a dip in it?

Truck looks great, nice build thread!

dv8customs · 04-22-2011, 09:48 PM

You made be grab a flash light and a level and go check. The roof is straight. I think it looks like that because the edge around the windshield.

bigblock73 · 04-23-2011, 01:04 AM

Haah, sorry man...didn't mean to scare you.

Must just be an optical illusion.

Nobaddaze · 05-16-2011, 01:12 AM

Any Updates?? Love the build so far...

dv8customs · 05-17-2011, 01:46 PM

No, hard to get free time these days.

Sold the Intro's but that is all that has changed. Plan to replace them with a 22/24 combo some time in the future.

dgreen · 05-25-2011, 10:31 PM

did u spray the white primer with a gun or cans im trying to find a flat white to paint my truck , any help would be awesome

dv8customs · 05-27-2011, 08:18 AM

Sprayed with a gun. It is Kustom Shop primer

http://www.tcpglobal.com/kustomshop/

dgreen · 06-07-2011, 04:00 PM

how did you get the welds down ? so they dont show in the paint, i just filled the holes on my bed were the guy had the screws for the tono cover

Nobaddaze · 06-07-2011, 04:31 PM

I used a grinder with a flap wheel. Its like a grinding wheel but its a bunch of pieces of sand paper layered on top of each other. just take your time and dont be too aggressive.

dgreen · 06-07-2011, 05:26 PM

Quote:

Originally Posted by Nobaddaze

I used a grinder with a flap wheel. Its like a grinding wheel but its a bunch of pieces of sand paper layered on top of each other. just take your time and dont be too aggressive.

thanks!

dgreen · 06-10-2011, 07:29 AM

also were did you get the inner fenders?

ruffrida2005 · 06-10-2011, 01:46 PM

Inner fenders came from Tractor supply. They are tandam alxe fenders

dgreen · 06-10-2011, 05:20 PM

Quote:

Originally Posted by ruffrida2005

Inner fenders came from Tractor supply. They are tandam alxe fenders

**** ya!

dv8customs · 06-10-2011, 11:47 PM

Quote:

Originally Posted by Nobaddaze

I used a grinder with a flap wheel. Its like a grinding wheel but its a bunch of pieces of sand paper layered on top of each other. just take your time and dont be too aggressive.

Quote:

Originally Posted by ruffrida2005

Inner fenders came from Tractor supply. They are tandam alxe fenders

Man, you guys are on top of things.

ruffrida2005 · 06-11-2011, 10:46 AM

Quote:

Originally Posted by dv8customs

Man, you guys are on top of things.

Someone has to be. We know you dont know what your doing anyways and just steal pics off Facebook.

Nobaddaze · 06-12-2011, 01:01 AM

Quote:

Originally Posted by dv8customs

Man, you guys are on top of things.

dv8customs · 07-09-2011, 07:24 PM

Finally got some work done!

Made my motor mounts and got the motor in. Got one mount 90% welded on and ran out of wire so I set the other one in place with the motor in to make sure my alignment was right. I will need to rework my tranny crossmember a bit but that was expected.

Once I get it all lined out the motor will come back out to one day get all cleaned up and painted.

VA72C10 · 07-09-2011, 07:41 PM

Nice job on the mounts.

texastruckjunky · 07-09-2011, 08:54 PM

Excellent job on the mounts, it looked like it was going to hit when you mocked up your stearing. You did an excellent job of avoiding that problem.

04-22-2011, 11:52 AM	#851
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 That's my buddies crew cab bodied on 22's. The little Toyota is bodied also Last edited by dv8customs; 04-22-2011 at 11:54 AM.

04-22-2011, 11:59 AM	#852
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Project '86 wat kinda v8 is in the yota??

04-22-2011, 12:02 PM	#853
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: Project '86 that crew is sweet as well! i bet those are the wheels that u had for mock up? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445 Last edited by WillieloRidez; 04-22-2011 at 12:03 PM.

04-22-2011, 01:16 PM	#854
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: Project '86 My buddy built the yota, 350 in it. Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-22-2011, 07:41 PM	#856
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Project '86 That Envoy is sick! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

04-22-2011, 09:48 PM	#858
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 You made be grab a flash light and a level and go check. The roof is straight. I think it looks like that because the edge around the windshield.

04-23-2011, 01:04 AM	#859
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Project '86 Haah, sorry man...didn't mean to scare you. Must just be an optical illusion. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-16-2011, 01:12 AM	#860
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Project '86 Any Updates?? Love the build so far... __________________ Hard work has a future payoff. Laziness pays off now. My Build

05-17-2011, 01:46 PM	#861
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 No, hard to get free time these days. Sold the Intro's but that is all that has changed. Plan to replace them with a 22/24 combo some time in the future.

05-25-2011, 10:31 PM	#862
dgreen Registered User Join Date: May 2011 Location: rochester ny Posts: 176	Re: Project '86 did u spray the white primer with a gun or cans im trying to find a flat white to paint my truck , any help would be awesome

05-27-2011, 08:18 AM	#863
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Sprayed with a gun. It is Kustom Shop primer http://www.tcpglobal.com/kustomshop/

06-07-2011, 04:00 PM	#864
dgreen Registered User Join Date: May 2011 Location: rochester ny Posts: 176	Re: Project '86 how did you get the welds down ? so they dont show in the paint, i just filled the holes on my bed were the guy had the screws for the tono cover

06-07-2011, 04:31 PM	#865
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Project '86 I used a grinder with a flap wheel. Its like a grinding wheel but its a bunch of pieces of sand paper layered on top of each other. just take your time and dont be too aggressive. __________________ Hard work has a future payoff. Laziness pays off now. My Build

06-10-2011, 07:29 AM	#867
dgreen Registered User Join Date: May 2011 Location: rochester ny Posts: 176	Re: Project '86 also were did you get the inner fenders?

06-10-2011, 01:46 PM	#868
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project '86 Inner fenders came from Tractor supply. They are tandam alxe fenders __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

07-09-2011, 07:24 PM	#873
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Finally got some work done! Made my motor mounts and got the motor in. Got one mount 90% welded on and ran out of wire so I set the other one in place with the motor in to make sure my alignment was right. I will need to rework my tranny crossmember a bit but that was expected. Once I get it all lined out the motor will come back out to one day get all cleaned up and painted.

07-09-2011, 07:41 PM	#874
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project '86 Nice job on the mounts. __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2011, 08:54 PM	#875
texastruckjunky Registered User Join Date: May 2009 Location: San Antonio,Texas Posts: 220	Re: Project '86 Excellent job on the mounts, it looked like it was going to hit when you mocked up your stearing. You did an excellent job of avoiding that problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.