How about some pics of bagged 60-66

[C/10 King]

Originally Posted by Boomscatty

Here are a couple shots of my 60 on RideTech E3.Attachment 1480271

Attachment 1480272

Sweet Sweet Sweet!!!!!

[frostie_122]

Originally Posted by rwade

Frostie_122, can you post some more pics and info on how you mounted your rack and pinion on your stock crossmember?

Thanks Wade

The crossmember has been pancaked. The rack has two tabs, we welded threaded mount points and just two bolts. Notched the frame on both sides due to the air ride.

[frostie_122]

Originally Posted by frostie_122

The crossmember has been pancaked. The rack has two tabs, we welded threaded mount points and just two bolts. Notched the frame on both sides due to the air ride.

Another

[60chevyjim]

im thinking about pancaking the crossmember on my 65
to get it lower with cut coil springs and no drop spindels.
do you think is it possible to still use the original steering box
if I put the c notches for the steering ?

thanks chevyjim

[frostie_122]

Originally Posted by 60chevyjim

im thinking about pancaking the crossmember on my 65
to get it lower with cut coil springs and no drop spindels.
do you think is it possible to still use the original steering box
if I put the c notches for the steering ?

thanks chevyjim

i believe it has been done

[rwade]

Awesome work Frostie! Thanks for the pictures. Please post somemore pics in this section as your project progresses.

Thanks, Wade

[Jraney]

Hey fellas nice trucks. Do I have to go with rack and pinion steering group when I slam my 64?
Posted via Mobile Device

[frostie_122]

Originally Posted by Jraney

Hey fellas nice trucks. Do I have to go with rack and pinion steering group when I slam my 64?
Posted via Mobile Device

Nope. You can do traditional steering. Just gonna have to modify some things to get correct geometry.

[Jraney]

Is that a difficult process
Posted via Mobile Device

[frostie_122]

Originally Posted by Jraney

Is that a difficult process
Posted via Mobile Device

Not terrible.

[Jraney]

Ok. Sounds good. Thanks.
Posted via Mobile Device

[forestb]

Can someone tell me if you have a stock front cross member, tubular control arms and 2 in drop spindles how low can you get your truck. The measurement I am looking for is from the center of the hub to the wheel well. Thank you.

[forestb]

Where did you get the low profile white walls? Your truck looks amazing by the way.

Originally Posted by Boomscatty

Here are a couple shots of my 60 on RideTech E3.Attachment 1480271

Attachment 1480272

[namloc]

Got the 60 GMC out and driving recently,Not done though great feeling it move's on it's own.

[Realnoisy]

Here's a couple of my 65'. Took me five years to build (a year of that was waiting on Thorbecke Brothers false promises on ordered parts. Buyer beware). Anyhow, we are finally cruising down the road. All the hard work has paid off.

[namloc]

Nice like it, That canopy is sweet.

[likaroc13]

Originally Posted by Realnoisy

Here's a couple of my 65'. Took me five years to build (a year of that was waiting on Thorbecke Brothers false promises on ordered parts. Buyer beware). Anyhow, we are finally cruising down the road. All the hard work has paid off.

Hate to hear of the troubles, but it turned out nice! Great patina as well.

[Realnoisy]

Originally Posted by namloc

Nice like it, That canopy is sweet.

Thank you Namloc!

[Realnoisy]

Originally Posted by likaroc13

Hate to hear of the troubles, but it turned out nice! Great patina as well.

Thank you Likaroc13!

[baggedbigblock]

Im about to set up my drive height and align the steering rack. What are most of you bagged guys driving at/cruising at? I was thinking 3" frame to ground, or maybe 5". The truck lays frame, its on porterbuilt suspension and 2600 bags up front F7000 rear over axle.

Im trying to drive as low as possible with out tearing up my new frame.

[PcolaC10]

Originally Posted by 68anthony

My bagged 66 running full @gsi_machineandfabrication susspension.

I'll be doing the GSI as soon as I find a truck worth buying. They are getting hard to find down in south Alabama/NW Florida.

[cioutlaw]

freshly bagged over the weekend

[IMG][/IMG]

[piratexpress1369a]

That looks awesome

[shortbed70]

Originally Posted by cioutlaw

freshly bagged over the weekend

[IMG][/IMG]

What size tires are on your truck

[Mikeextrafast]