Here we go!!! - Page 36 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RRC · 12-27-2014, 09:36 PM

I got the AccuAir working today

Still need to run lines to the bags and tidy up some wiring.

BigDaddyV · 12-30-2014, 12:11 PM

What did you use for you hard air line?

RRC · 12-30-2014, 02:59 PM

Quote:

Originally Posted by BigDaddyV

What did you use for you hard air line?

I used 3/8 aluminum fuel line.

RRC · 12-30-2014, 08:11 PM

I put the front sheet metal back on....This year is just about over and the truck looks the same as this time last year. But this year everything under the sheet metal is done

So here's to a New Year!!! and hopefully next year is another great year!!!

duallyjams · 12-31-2014, 08:36 AM

Looking great.

RRC · 12-31-2014, 05:52 PM

Quote:

Originally Posted by duallyjams

Looking great.

Thanks James!!

ddubbs · 01-01-2015, 11:01 PM

You have been busy. Can't wait to see what the New Year brings for your truck.

RRC · 01-04-2015, 02:56 PM

Quote:

Originally Posted by ddubbs

You have been busy. Can't wait to see what the New Year brings for your truck.

Thanks dubbs!!! This year I want to drive it to a couple shows, then tear it apart for paint

I can't go a summer with it apart in the garage

Bennett68C10 · 01-04-2015, 07:55 PM

Quote:

Originally Posted by RRC

Thanks dubbs!!! This year I want to drive it to a couple shows, then tear it apart for paint

I can't go a summer with it apart in the garage

Sounds like a good plan Russ, wish I would have done that with mine. Everything looks great.

gonnuts · 01-14-2015, 09:47 PM

Quote:

Originally Posted by RRC

Thanks dubbs!!! This year I want to drive it to a couple shows, then tear it apart for paint

I can't go a summer with it apart in the garage

That sounds like a good plan, which ones are you planning on going to? You coming out here? We have some pretty good show & shines.

that would be a good test for it.

RRC · 01-15-2015, 06:54 PM

Quote:

Originally Posted by gonnuts

That sounds like a good plan, which ones are you planning on going to? You coming out here? We have some pretty good show & shines.

that would be a good test for it.

I would like too go to Super Run.....It's in Red Deer this year.

gonnuts · 01-15-2015, 10:30 PM

Quote:

Originally Posted by RRC

I would like too go to Super Run.....It's in Red Deer this year.

Cool, let's go.

RRC · 01-04-2015, 03:00 PM

Here's a review pic....

JakeDW · 01-04-2015, 03:49 PM

Quote:

Originally Posted by RRC

Here's a review pic....

She's came along way.

Jake

slowcpe · 01-06-2015, 01:06 AM

Well I just spent the last 2 evenings reading through your build. very nice work so far. Can't wait to see the finished product. Should be incredible.

RRC · 01-07-2015, 08:04 PM

Quote:

Originally Posted by Bennett68C10

Sounds like a good plan Russ, wish I would have done that with mine. Everything looks great.

Thanks Keith!!

[QU 8673960OTE=slowcpe;6987502]Well I just spent the last 2 evenings reading through your build. very nice work so far. Can't wait to see the finished product. Should be incredible.[/QUOTE]

Thanks Ryan!! I appreciate you taking the time to read my thread

jkeating1 · 01-07-2015, 10:08 PM

In your opinion, would it be any easier to separate the rails from the crossmembers before you shortened them, as you did with the fishplating? I can see some advantage to being able to turn them any angle you want.

aggie91 · 01-08-2015, 12:15 PM

Quote:

Originally Posted by jkeating1

In your opinion, would it be any easier to separate the rails from the crossmembers before you shortened them, as you did with the fishplating? I can see some advantage to being able to turn them any angle you want.

I am thinking of doing this too on an upcoming project. I think it would be good to turn/position the rails for the best welding position. I have access to some heavy tube that I would clamp the rails on to so that stay straight and true.

jkeating1 · 01-08-2015, 12:48 PM

Quote:

Originally Posted by aggie91

I am thinking of doing this too on an upcoming project. I think it would be good to turn/position the rails for the best welding position. I have access to some heavy tube that I would clamp the rails on to so that stay straight and true.

3" C channel here, so we're on the same thought process

RRC · 01-08-2015, 02:33 PM

I have'nt really thought about doing it that way......but if you are doing Porterbuilt cross members the frame will have to be squared up anyways. So as long as there straight and the same lenght I don't see it being a problem.

RRC · 01-16-2015, 10:02 PM

Getting the trans ready for some color

**N2TRUX** · 01-17-2015, 09:53 AM

Thats a lot of work for something that is never seen. I'm in the process of slicking one up right now. I keep asking myself why, but I haven't stopped yet.

RRC · 01-17-2015, 01:23 PM

Quote:

Originally Posted by N2TRUX

Thats a lot of work for something that is never seen. I'm in the process of slicking one up right now. I keep asking myself why, but I haven't stopped yet.

Lol!!! I asked myself why a couple times too

But stuff like this is what I like....because at the end of the build I know it's done and I see it (in my head

)

**N2TRUX** · 01-18-2015, 10:35 AM

Oh I know exactly what you are saying. I keep looking at my frame, thinking about pulling the bed to detail the suspension even more. Fortunately I haven't succumbed to that desire....yet.

RRC · 01-18-2015, 11:20 AM

Well your truck is still one of my favorite trucks!!!! It's funny how a guy always has something that can always use some extra detail. I did the interior 3 times on my 79.....and the third time I was happy. This truck is taking longer but i'm trying to get it right the first time

12-27-2014, 09:36 PM	#1
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! I got the AccuAir working today Still need to run lines to the bags and tidy up some wiring. Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

12-30-2014, 12:11 PM	#2
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Here we go!!! What did you use for you hard air line? __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

12-30-2014, 08:11 PM	#4
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! I put the front sheet metal back on....This year is just about over and the truck looks the same as this time last year. But this year everything under the sheet metal is done So here's to a New Year!!! and hopefully next year is another great year!!! Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

12-31-2014, 08:36 AM	#5
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Here we go!!! Looking great. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-01-2015, 11:01 PM	#7
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Here we go!!! You have been busy. Can't wait to see what the New Year brings for your truck. __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

01-04-2015, 03:00 PM	#13
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Here's a review pic.... Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

01-06-2015, 01:06 AM	#15
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Here we go!!! Well I just spent the last 2 evenings reading through your build. very nice work so far. Can't wait to see the finished product. Should be incredible. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

01-07-2015, 10:08 PM	#17
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: Here we go!!! In your opinion, would it be any easier to separate the rails from the crossmembers before you shortened them, as you did with the fishplating? I can see some advantage to being able to turn them any angle you want. Attached Images __________________ JK

01-08-2015, 02:33 PM	#20
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! I have'nt really thought about doing it that way......but if you are doing Porterbuilt cross members the frame will have to be squared up anyways. So as long as there straight and the same lenght I don't see it being a problem. __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

01-16-2015, 10:02 PM	#21
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Getting the trans ready for some color Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

01-17-2015, 09:53 AM	#22
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Here we go!!! Thats a lot of work for something that is never seen. I'm in the process of slicking one up right now. I keep asking myself why, but I haven't stopped yet. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-18-2015, 10:35 AM	#24
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Here we go!!! Oh I know exactly what you are saying. I keep looking at my frame, thinking about pulling the bed to detail the suspension even more. Fortunately I haven't succumbed to that desire....yet. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-18-2015, 11:20 AM	#25
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Well your truck is still one of my favorite trucks!!!! It's funny how a guy always has something that can always use some extra detail. I did the interior 3 times on my 79.....and the third time I was happy. This truck is taking longer but i'm trying to get it right the first time __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.