1967 Chevrolet K20 "The BEAST" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70rs/ss · 06-17-2009, 01:54 PM

I fill the hole with greese and push the alingment tool or something very close in diameter in there and the greese forces it out, or you could do it the easy way and get a puller, but I like to make a mess!

BTW that Blazer looks like one I've seen here in AZ before?!

glimmertwin01 · 07-06-2009, 09:32 PM

got some work dont finally did some plug welding and
stripped the cab
before ..... gotta love chemical strippers what a buzz from methylene chloride

msgross · 07-06-2009, 09:36 PM

Here was my technique... just found a bolt the right size and it pulled it right out with ease...

I have heard of the grease trick as well..

glimmertwin01 · 07-06-2009, 09:37 PM

and now the back n roof stripped where i need to do dent filling

glimmertwin01 · 07-06-2009, 09:39 PM

cool mike u musta posted when i was doing my second post....LOL illlook it over thanks

70rs/ss · 07-07-2009, 12:35 PM

Yeah that aircraft stripper will make light work of paint! I did an Elco a few years back and used that stuff to strip to the bare metal, the WHOLE thing, yeah the laquer based paints didn't fare well in the AZ sun and heat it was cracked and looked like a road map!!

Looking good man keep up the work!

glimmertwin01 · 07-14-2009, 07:59 PM

have not done much this past week..but i have an excuse....

Excuse!>>>> my little one couldnt cut the mustard any more

msgross · 07-15-2009, 06:22 PM

nice.. what did that run? I need to upgrade too..

glimmertwin01 · 07-15-2009, 06:28 PM

it runs everything but my IR D/A..it needs 15CFM this thing puts out 13..oh well... everything else runs great..... the DA does work better than it did... but still compared to 6.5 CFM ill take it

msgross · 07-15-2009, 07:59 PM

where did you buy it? how much $?

glimmertwin01 · 07-16-2009, 06:03 AM

$275 from a fella on Craigslist...he was moving..he had it in his basement.. the thingis like new and sooo quiet so we had to get a fridge dolly and bring it up the stairs and in to my K2500
saved 400 off new

msgross · 07-16-2009, 07:24 AM

good deal for sure then...

Sinisterspeed · 07-16-2009, 11:09 PM

Dan, All I can say is OMG!

It makes me gringe just looking at that cab. I cant believe you fixed that! Makes feel pretty stupid about the dime sized rust hole I found in this 67 cab I have (that I was disapointed about)

...... I wonder what the shipping on a whole Rust free (except for that dime hole) 67 Small window cab would be.. LOL

Just kidding. Man you deffinatly have more balls then me to take that on!

Great work, Keep it up!!

glimmertwin01 · 07-17-2009, 06:12 AM

hahahaha and I hear you ***** about tiny rust areas... well this one wasnt rust as much as beat up.. I guess us guys up here are geographically challenged for old sctuff... and you wondered why i was marveling at all that nice crispy clean western stuff??
thanks for the props and the parts man....

glimmertwin01 · 07-18-2009, 08:58 PM

got all the putty outta the crevaces and got some of that lovely Pea soup colored Etch primer on the beast...next up bondo

glimmertwin01 · 07-18-2009, 09:03 PM

still waiting on the Bumper

msgross · 07-18-2009, 09:21 PM

well,the top of the roof should be easy!

glimmertwin01 · 07-18-2009, 09:39 PM

no one said it was gonna be easy....LOL smart ass

70rs/ss · 07-23-2009, 02:47 PM

Hey Dan, guess what I tripped over the other day....

A 73 Elky, it was Vato'fied w/13 inch spokes, and was pretty spartan on anything interior, but had a snappy 250 L6/th350 and was fairly straight w/some minor rust in the "trunk thing" interested? Asking $1300, I'd offer up about $6-800 and you'd own it I guess?? I have his phone number but no picts??

LMK??

BTW the cab is coming together, I junked a 67 cab that was near perfect (straight) except she had the Cancer in the cowl vents, althought the floor and rockers seemed OK, yeah I know, I suck!

msgross · 07-23-2009, 05:10 PM

Quote:

Originally Posted by 70rs/ss

BTW the cab is coming together, I junked a 67 cab that was near perfect (straight) except she had the Cancer in the cowl vents, althought the floor and rockers seemed OK, yeah I know, I suck!

Next winter if I make a nice snowball, send it to AZ in a cooler.. will you hit yourself in the face with it?

That's what I think of AZ guys trashing "bad" cabs!!!

all kidding aside I need to make a trip and invest in some SW sheetmetal for my next truck.

glimmertwin01 · 07-23-2009, 05:21 PM

ok I must need a new brain...look what i was scoping out yesterday... wants 1500 but ...not with no motor.. it isnt bad I think its just kinda bad ass lookin w/ 4 speed hugger orange 71

msgross · 07-23-2009, 08:17 PM

love the bumper..

70rs/ss · 09-03-2009, 06:13 PM

Too cool!

MSGROSS I'm from PA!! I know what rust on 3-5 year old vehicles looks like, and yeah I am spoiled!! Do like Dan did buy here and drive or ship home! My 2wd Blazer is headed to OH in a couple of months! I don't mind sharing, we have lots!

glimmertwin01 · 03-07-2010, 09:52 AM

Decided to Bag the 67 Cab and use a good 68 rot free NM cab...
i snagged this with the doors a left front fender and a nose with core support for 500! heres the cab..once i clean it up inside today ill have better pics

msgross · 03-07-2010, 10:22 AM

where did you find that? nice upgrade... I'd finish up the cab that you have and sell it to another NY'er that has a rusty cab. Or bring it down to Carlisle...

06-17-2009, 01:54 PM	#76
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 Chevrolet K20 "The BEAST" I fill the hole with greese and push the alingment tool or something very close in diameter in there and the greese forces it out, or you could do it the easy way and get a puller, but I like to make a mess! BTW that Blazer looks like one I've seen here in AZ before?!

07-06-2009, 09:32 PM	#77
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" got some work dont finally did some plug welding and stripped the cab before ..... gotta love chemical strippers what a buzz from methylene chloride Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-06-2009, 09:36 PM	#78
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" Here was my technique... just found a bolt the right size and it pulled it right out with ease... I have heard of the grease trick as well.. Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-06-2009, 09:37 PM	#79
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" and now the back n roof stripped where i need to do dent filling Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-06-2009, 09:39 PM	#80
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" cool mike u musta posted when i was doing my second post....LOL illlook it over thanks __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-07-2009, 12:35 PM	#81
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 Chevrolet K20 "The BEAST" Yeah that aircraft stripper will make light work of paint! I did an Elco a few years back and used that stuff to strip to the bare metal, the WHOLE thing, yeah the laquer based paints didn't fare well in the AZ sun and heat it was cracked and looked like a road map!! Looking good man keep up the work!

07-14-2009, 07:59 PM	#82
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" have not done much this past week..but i have an excuse.... Excuse!>>>> my little one couldnt cut the mustard any more Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 07-14-2009 at 08:00 PM. Reason: typos what else!

07-15-2009, 06:22 PM	#83
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" nice.. what did that run? I need to upgrade too.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-15-2009, 06:28 PM	#84
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" it runs everything but my IR D/A..it needs 15CFM this thing puts out 13..oh well... everything else runs great..... the DA does work better than it did... but still compared to 6.5 CFM ill take it __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-15-2009, 07:59 PM	#85
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" where did you buy it? how much $? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-16-2009, 06:03 AM	#86
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" $275 from a fella on Craigslist...he was moving..he had it in his basement.. the thingis like new and sooo quiet so we had to get a fridge dolly and bring it up the stairs and in to my K2500 saved 400 off new __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-16-2009, 07:24 AM	#87
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" good deal for sure then... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-16-2009, 11:09 PM	#88
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: 1967 Chevrolet K20 "The BEAST" Dan, All I can say is OMG! It makes me gringe just looking at that cab. I cant believe you fixed that! Makes feel pretty stupid about the dime sized rust hole I found in this 67 cab I have (that I was disapointed about) ...... I wonder what the shipping on a whole Rust free (except for that dime hole) 67 Small window cab would be.. LOL Just kidding. Man you deffinatly have more balls then me to take that on! Great work, Keep it up!! __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build Last edited by Sinisterspeed; 07-16-2009 at 11:09 PM.

07-17-2009, 06:12 AM	#89
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" hahahaha and I hear you ***** about tiny rust areas... well this one wasnt rust as much as beat up.. I guess us guys up here are geographically challenged for old sctuff... and you wondered why i was marveling at all that nice crispy clean western stuff?? thanks for the props and the parts man.... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 07-17-2009 at 06:13 AM.

07-18-2009, 08:58 PM	#90
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" got all the putty outta the crevaces and got some of that lovely Pea soup colored Etch primer on the beast...next up bondo Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 07-18-2009 at 08:59 PM. Reason: typos what else??



Register or Log In To remove these advertisements.

07-18-2009, 09:03 PM	#91
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" still waiting on the Bumper __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-18-2009, 09:21 PM	#92
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" well,the top of the roof should be easy! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-18-2009, 09:39 PM	#93
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" no one said it was gonna be easy....LOL smart ass __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-23-2009, 02:47 PM	#94
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 Chevrolet K20 "The BEAST" Hey Dan, guess what I tripped over the other day.... A 73 Elky, it was Vato'fied w/13 inch spokes, and was pretty spartan on anything interior, but had a snappy 250 L6/th350 and was fairly straight w/some minor rust in the "trunk thing" interested? Asking $1300, I'd offer up about $6-800 and you'd own it I guess?? I have his phone number but no picts?? LMK?? BTW the cab is coming together, I junked a 67 cab that was near perfect (straight) except she had the Cancer in the cowl vents, althought the floor and rockers seemed OK, yeah I know, I suck! Last edited by 70rs/ss; 07-23-2009 at 02:47 PM.

07-23-2009, 05:21 PM	#96
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" ok I must need a new brain...look what i was scoping out yesterday... wants 1500 but ...not with no motor.. it isnt bad I think its just kinda bad ass lookin w/ 4 speed hugger orange 71 Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 07-23-2009 at 05:25 PM.

07-23-2009, 08:17 PM	#97
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" love the bumper.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-03-2009, 06:13 PM	#98
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 Chevrolet K20 "The BEAST" Too cool! MSGROSS I'm from PA!! I know what rust on 3-5 year old vehicles looks like, and yeah I am spoiled!! Do like Dan did buy here and drive or ship home! My 2wd Blazer is headed to OH in a couple of months! I don't mind sharing, we have lots!

03-07-2010, 09:52 AM	#99
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1967 Chevrolet K20 "The BEAST" Decided to Bag the 67 Cab and use a good 68 rot free NM cab... i snagged this with the doors a left front fender and a nose with core support for 500! heres the cab..once i clean it up inside today ill have better pics Attached Images __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-07-2010, 10:22 AM	#100
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1967 Chevrolet K20 "The BEAST" where did you find that? nice upgrade... I'd finish up the cab that you have and sell it to another NY'er that has a rusty cab. Or bring it down to Carlisle... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.