Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Schwinn68 · 03-22-2010, 12:18 PM

could this be made to work in a floorshift application? Would it be as simple as taking off the shift indicator and shifter. I really need a new column as mine is just flat worn out and I'd rather just buy a new piece once than buy used and chance having to do it again anyways.

Is there anything else to consider replacing when installing a new column? I feel like such a newb asking these questions LOL

*CPPJEFF* · 03-22-2010, 12:30 PM

Quote:

Originally Posted by Schwinn68

could this be made to work in a floorshift application? Would it be as simple as taking off the shift indicator and shifter. I really need a new column as mine is just flat worn out and I'd rather just buy a new piece once than buy used and chance having to do it again anyways.

Is there anything else to consider replacing when installing a new column? I feel like such a newb asking these questions LOL

I personally would not pull the handle off as thats looks really crude, on the column shift stuff i sell the entire kit from the column to the steering box.

smbrouss70 · 05-16-2010, 09:00 PM

PM sent Jeff!

domestictuner · 05-17-2010, 02:32 AM

where are they made?

*CPPJEFF* · 05-17-2010, 10:34 AM

Quote:

Originally Posted by domestictuner

where are they made?

Im sure they are offshores, but in 2010 what isnt???

Scottshotrods · 05-17-2010, 10:41 AM

Quote:

Originally Posted by CPPJEFF

Im sure they are offshores, but in 2010 what isnt???

Ididit is made in the U.S.A and comes with a lifetime warranty

*CPPJEFF* · 05-17-2010, 11:00 AM

Quote:

Originally Posted by Scottshotrods

Ididit is made in the U.S.A and comes with a lifetime warranty

Very true and i sell those allday long! I will warranty these columns against manufactures defects. These suckers are really nice and you cant beat them for the $$$$$$.

smbrouss70 · 05-17-2010, 08:33 PM

Can any of you guys that have already purchased one of these columns get me the dimension that I have listed in the picture below?

*CPPJEFF* · 05-18-2010, 01:46 PM

Quote:

Originally Posted by smbrouss70

Can any of you guys that have already purchased one of these columns get me the dimension that I have listed in the picture below?

5 1/4 inc, sorry for the delay in reply. Hope this helps.

smbrouss70 · 05-18-2010, 02:00 PM

Thanks Jeff! I'll check out my setup tonight after work and let you know tomorrow.

rondog4416 · 05-18-2010, 02:44 PM

ill test it in my 69 gmc .shoot me price thanks ron

*CPPJEFF* · 05-18-2010, 03:22 PM

Quote:

Originally Posted by rondog4416

ill test it in my 69 gmc .shoot me price thanks ron

They are $325.00..

my67chevytruck · 05-18-2010, 03:23 PM

Jeff, sent you a pm.

*CPPJEFF* · 05-18-2010, 04:18 PM

Quote:

Originally Posted by my67chevytruck

Jeff, sent you a pm.

I will work on the 200 P.M'S i got in the last 24 hours right now. Thanks

**Dieselwrencher** · 05-18-2010, 04:58 PM

Do you have any idea when or if a floor shift version will be out? Thanks Ryan.

*CPPJEFF* · 05-18-2010, 05:06 PM

Quote:

Originally Posted by Dieselwrencher

Do you have any idea when or if a floor shift version will be out? Thanks Ryan.

Yes on a serious note about a year. Thanks

**Dieselwrencher** · 05-18-2010, 05:07 PM

Dang it!

Well just keep us updated. By that time I'll be ready for 2.

*CPPJEFF* · 05-18-2010, 05:09 PM

Quote:

Originally Posted by Dieselwrencher

Dang it!

Well just keep us updated. By that time I'll be ready for 2.

No sweat bro. It took a LONG TIME to make that column shift column.

**Dieselwrencher** · 05-18-2010, 05:14 PM

So eliminate some parts and change the cover.

Sure sounds simple and fast doesn't it? I know how that R&D and waiting on a manufacurer can go, it takes time. especially for a quality, well thought out product.

VA72C10 · 08-03-2010, 09:19 AM

Still stocking these? Are they still 325 with the adapter? Is that the shipped total? Thanks...

*CPPJEFF* · 08-03-2010, 10:12 AM

Quote:

Originally Posted by VA72C10

Still stocking these? Are they still 325 with the adapter? Is that the shipped total? Thanks...

I am currently out of stock!! The boys over at 6772chevytrucks bought em all!

I should have some soon and i will try to honor that price. Also i have the exact same column coming in but in chrome versus the black!!

VA72C10 · 08-03-2010, 11:11 AM

how much more for the chrome? And want to verify that was a shipped price?

*CPPJEFF* · 08-03-2010, 01:17 PM

Quote:

Originally Posted by VA72C10

how much more for the chrome? And want to verify that was a shipped price?

Im guessing $100.00 more for chrome and yes that was a shipped price. Also expect the prices of this column to go up.

rustsev · 08-03-2010, 02:50 PM

looks great, but I too need a floor shift version.

*CPPJEFF* · 08-03-2010, 03:44 PM

Quote:

Originally Posted by rustsev

looks great, but I too need a floor shift version.

That will happen, patience my friend.

03-22-2010, 12:18 PM	#76
Schwinn68 Registered User Join Date: Mar 2010 Location: Minooka IL Posts: 191	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns could this be made to work in a floorshift application? Would it be as simple as taking off the shift indicator and shifter. I really need a new column as mine is just flat worn out and I'd rather just buy a new piece once than buy used and chance having to do it again anyways. Is there anything else to consider replacing when installing a new column? I feel like such a newb asking these questions LOL __________________ Ben _____________________________________ 1971 Chevy shortbed 350/4-speed sold 2005 Chevy Duramax EC/4x4 Local 597 Pipefitters certified TIG MIG and stick welder Last edited by Schwinn68; 03-22-2010 at 12:23 PM.

05-16-2010, 09:00 PM	#78
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns PM sent Jeff! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-17-2010, 02:32 AM	#79
domestictuner Registered User Join Date: Aug 2007 Location: WY Posts: 41	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns where are they made?

05-17-2010, 08:33 PM	#83
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Can any of you guys that have already purchased one of these columns get me the dimension that I have listed in the picture below? Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-18-2010, 02:00 PM	#85
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Thanks Jeff! I'll check out my setup tonight after work and let you know tomorrow. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-18-2010, 02:44 PM	#86
rondog4416 Registered User Join Date: May 2010 Location: puyallup wa Posts: 233	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns ill test it in my 69 gmc .shoot me price thanks ron

05-18-2010, 03:23 PM	#88
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Jeff, sent you a pm. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-18-2010, 04:58 PM	#90
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Do you have any idea when or if a floor shift version will be out? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-18-2010, 05:07 PM	#92
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Dang it! Well just keep us updated. By that time I'll be ready for 2. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-18-2010, 05:14 PM	#94
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns So eliminate some parts and change the cover. Sure sounds simple and fast doesn't it? I know how that R&D and waiting on a manufacurer can go, it takes time. especially for a quality, well thought out product. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-03-2010, 09:19 AM	#95
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns Still stocking these? Are they still 325 with the adapter? Is that the shipped total? Thanks... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 08-03-2010 at 09:20 AM.

08-03-2010, 11:11 AM	#97
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns how much more for the chrome? And want to verify that was a shipped price? __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-03-2010, 02:50 PM	#99
rustsev slowest. build. ever. Join Date: Jan 2009 Location: SF East Bay Area Posts: 28	Re: Lick your lips CPP just got em 1967-72 Brand new factory Tilt Columns looks great, but I too need a floor shift version.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.