IN Misc. Clearance Sale - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 01-06-2012, 08:01 AM

Quote:

Originally Posted by gringoloco

If you are certain they are correct L and R for a 69-72, I'll take 'em. The 67-68 buckets are different. Please let me know for sure. Thanks
Posted via Mobile Device

Here are some close up pictures. I can get some pictures of the 67-68 style later today. These have the notch in the ring for the adjuster spring to attach. The 67-8 have the spring attach to the ring that holds the headlight into the bucket so they just have an opening for the spring to go through. Thanks

**Todd68Chevy** · 01-07-2012, 12:19 AM

Here is a picture I took from another thread of a 1967-68 headlight bucket. Hope this helps.

gringoloco · 01-07-2012, 01:26 AM

They appear correct- hard to tell they're so similar. PayPal?
Posted via Mobile Device

**Todd68Chevy** · 01-07-2012, 08:49 AM

Quote:

Originally Posted by gringoloco

They appear correct- hard to tell they're so similar. PayPal?
Posted via Mobile Device

They are close but the way I tel the difference is the adjuster spring hook up. If you look at the bottom of the ones for sale in the individual pictures you can see the hole in the bucket where the spring attaches. On the picture of the 67-68 it has a knock cut out just right of the bottom and that is where the spring goes past it and attaches to the trim ring instead. PM sent. Thanks

**allchevy58** · 01-08-2012, 01:17 AM

Quote:

Originally Posted by Todd68Chevy

Rev. light housings mailed today USPS First Class. Thanks

I will check tonight. Thanks

Received reverse light housing today, Thank You Todd.

chevytruckguy70 · 01-08-2012, 10:16 PM

Do you still have the dash repair panel? If so, how much and what would be shipping to 47136? Or better yet, to you have a full dash, preferably an a/c one.

**Todd68Chevy** · 01-08-2012, 10:46 PM

Quote:

Originally Posted by allchevy58

Received reverse light housing today, Thank You Todd.

Great to hear. Thanks

Quote:

Originally Posted by chevytruckguy70

Do you still have the dash repair panel? If so, how much and what would be shipping to 47136? Or better yet, to you have a full dash, preferably an a/c one.

Yes I have the repair and I can check on the shipping tomorrow. I have a complete uncut non a/c dash but I do not have an a/c dash out of the truck. The non a/c dash I have is complete and cut outside the windshield ledge. I would not know of any good way of shipping the complete dash for a reasonable price. I can check but I am sure it will be high. It is listed here. http://67-72chevytrucks.com/vboard/s...d.php?t=467199 Thanks

**Todd68Chevy** · 01-09-2012, 10:11 PM

Quote:

Originally Posted by chevytruckguy70

Do you still have the dash repair panel? If so, how much and what would be shipping to 47136? Or better yet, to you have a full dash, preferably an a/c one.

Shipping on the repair panel would be $12.27 USPS Parcel Post, $17.80 USPS Priority Mail or $17.52 UPS with insurance. I would go $50.00 total for the panel and USPS Priority Mail or UPS shipping. If you do not want it as big I can cut it smaller for less shipping. Let me know if you have anymore questions or need more pictures. Thanks

**Todd68Chevy** · 03-04-2012, 09:58 AM

Pictures of the upper door panel trim for gsxrdoug. They have surface rust on the chrome and a little wavy. $10.00 for both trims and $13.50 for the shipping.

gsxrdoug · 03-04-2012, 03:11 PM

Thanks Todd i'll take em.

Quote:

Originally Posted by Todd68Chevy

Pictures of the upper door panel trim for gsxrdoug. They have surface rust on the chrome and a little wavy. $10.00 for both trims and $13.50 for the shipping.

**Todd68Chevy** · 03-05-2012, 07:28 AM

Quote:

Originally Posted by gsxrdoug

Thanks Todd i'll take em.

Here are the only ones I have at this time. One is a passenger side and 3 are drivers side. I am not sure what color they are. My eyes do not always show colors correctly. 3 of them look blue to me. If you are interested I could put 2 of them in the box for another $8.00. Just let me know. Thanks

C5Phil · 03-05-2012, 10:34 AM

Interested in the gas filler/cap and tube shown in picture #5 in your first post-- what would you want for it shipped to 14589 zip? Let me know- thanks, Phil

**Todd68Chevy** · 03-05-2012, 10:48 AM

Quote:

Originally Posted by C5Phil

Interested in the gas filler/cap and tube shown in picture #5 in your first post-- what would you want for it shipped to 14589 zip? Let me know- thanks, Phil

Sorry but that item has already sold to Fesser. Thanks for your interest.

gsxrdoug · 03-07-2012, 02:29 PM

Todd, I'll pass on the vents but if the Green visors are still avail I will take them.

Todd you wouldn't happen to have on old radio laying around would you, non working is fine, I just want to fill the hole! The dash has NOT been cut.

**Todd68Chevy** · 03-07-2012, 09:14 PM

Quote:

Originally Posted by gsxrdoug

Todd, I'll pass on the vents but if the Green visors are still avail I will take them.

Todd you wouldn't happen to have on old radio laying around would you, non working is fine, I just want to fill the hole! The dash has NOT been cut.

Here are some pictures of the sun visors. The shipping for the door panel trim and the sunvisors would be $14.61 for USPS Parcel Post. So with what you have already paid that would leave you a total of $21.00 owed if you want the sunvisors.

I do not have a radio at this time. I am supposed to have one in a couple weeks when I meet up with a guy to get some parts that he is saving for me from one he is parting out.

Thanks

**FL71C10** · 03-07-2012, 10:28 PM

I'll take the red visors pending closer pics and shipping cost to zip 32803, business address.

Thanks.

**Todd68Chevy** · 03-08-2012, 08:47 PM

Quote:

Originally Posted by FL71C10

I'll take the red visors pending closer pics and shipping cost to zip 32803, business address.

Thanks.

The shipping would be $11.17 USPS Parcel Post or $15.45 USPS Priority Mail. They do need cleaned. The marks at the mounting screw area are scratches and not cracks.

**FL71C10** · 03-09-2012, 01:07 AM

I think I'll pass. Thanks for the pics, though.

**Todd68Chevy** · 03-09-2012, 07:32 AM

Quote:

Originally Posted by FL71C10

I think I'll pass. Thanks for the pics, though.

No problem, Thanks for your interest.

sesheff · 03-21-2012, 05:06 PM

Hi,

I have an A/C dash foir'72 Cheyenne. Does that mean that your patch panel for stock, stem-mount radio won't work?

Thanks,

Steve

**Todd68Chevy** · 03-21-2012, 05:10 PM

Quote:

Originally Posted by sesheff

Hi,

I have an A/C dash foir'72 Cheyenne. Does that mean that your patch panel for stock, stem-mount radio won't work?

Thanks,

Steve

As far as I know the radio hole is the same but then you do not have a hole for your a/c vent. I would say it would be better to get one from an a/c truck and I do not have one of those at this time. Thanks for checking, Todd

sesheff · 03-21-2012, 05:39 PM

Todd, I think my bodyshop guy only needs to fill the area surrounding the radio for a clean, stock, stem mount radio to fit. Probably no more than that area which is recessed in the dash. Nothing more. In this case, would the A/C vent hole be a factor? Thanks, Steve

**Todd68Chevy** · 03-21-2012, 11:00 PM

Quote:

Originally Posted by sesheff

Todd, I think my bodyshop guy only needs to fill the area surrounding the radio for a clean, stock, stem mount radio to fit. Probably no more than that area which is recessed in the dash. Nothing more. In this case, would the A/C vent hole be a factor? Thanks, Steve

I am not positive but I compared an a/c and non a/c dash that I have and they look the same out to the recess area. I have another dash that I can cut around just the recess area for $25.00 shipped if that is all you want. Most replace from the cluster to the glove box and from the dash pad to the bottom because it is easier to hide the welds. Thanks

HotRod C/10 · 03-21-2012, 11:22 PM

how much for the red visors if not spoken for? to 87114

**Todd68Chevy** · 03-22-2012, 05:15 AM

Quote:

Originally Posted by DSALRAM

how much for the red visors if not spoken for? to 87114

Still available. $20.00 plus shipping. Close up pictures posted above in post #92. Thanks

01-07-2012, 12:19 AM	#77
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. Clearance Sale Here is a picture I took from another thread of a 1967-68 headlight bucket. Hope this helps. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-07-2012, 01:26 AM	#78
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Misc. Clearance Sale They appear correct- hard to tell they're so similar. PayPal? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-08-2012, 10:16 PM	#81
chevytruckguy70 Registered User Join Date: Nov 2011 Location: Lanesville, IN Posts: 104	Re: Misc. Clearance Sale Do you still have the dash repair panel? If so, how much and what would be shipping to 47136? Or better yet, to you have a full dash, preferably an a/c one. __________________ Only Two...... Only two have laid down their lives for you, Jesus Christ and the American GI. 2007 Chevy 2500HD 4x4 Duramax 1970 Chevy K20 (SOLD) 1972 Chevy C15 (1/2 C10, 1/2 c20) 1970 Chevy C10 (parting out)

03-04-2012, 09:58 AM	#84
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. Clearance Sale Pictures of the upper door panel trim for gsxrdoug. They have surface rust on the chrome and a little wavy. $10.00 for both trims and $13.50 for the shipping. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-05-2012, 10:34 AM	#87
C5Phil Registered User Join Date: Nov 2011 Location: Williamson New York Posts: 427	Re: Misc. Clearance Sale Interested in the gas filler/cap and tube shown in picture #5 in your first post-- what would you want for it shipped to 14589 zip? Let me know- thanks, Phil

03-07-2012, 02:29 PM	#89
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Misc. Clearance Sale Todd, I'll pass on the vents but if the Green visors are still avail I will take them. Todd you wouldn't happen to have on old radio laying around would you, non working is fine, I just want to fill the hole! The dash has NOT been cut. __________________ 1970 C10 L6 250 three speeder

03-07-2012, 10:28 PM	#91
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Misc. Clearance Sale I'll take the red visors pending closer pics and shipping cost to zip 32803, business address. Thanks. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-09-2012, 01:07 AM	#93
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Misc. Clearance Sale I think I'll pass. Thanks for the pics, though. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-21-2012, 05:06 PM	#95
sesheff Registered User Join Date: Mar 2012 Location: Yorba Linda, CA Posts: 30	Re: Misc. Clearance Sale Hi, I have an A/C dash foir'72 Cheyenne. Does that mean that your patch panel for stock, stem-mount radio won't work? Thanks, Steve

03-21-2012, 05:39 PM	#97
sesheff Registered User Join Date: Mar 2012 Location: Yorba Linda, CA Posts: 30	Re: Misc. Clearance Sale Todd, I think my bodyshop guy only needs to fill the area surrounding the radio for a clean, stock, stem mount radio to fit. Probably no more than that area which is recessed in the dash. Nothing more. In this case, would the A/C vent hole be a factor? Thanks, Steve

03-21-2012, 11:22 PM	#99
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,054	Re: Misc. Clearance Sale how much for the red visors if not spoken for? to 87114 __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.