64 1ton (delivery day) - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1955 mancave · 01-23-2013, 06:45 PM

ok so i have a about 10 pictures to post, so i got the steering column done, and the master cyl installed, using capt. braket worked like a charm, i did have to extend the shaft but not a big deal, some of the pictures are of the sway bar, etc. ( hey no comments on how dirty it is ! still a work truck lol)

likaroc13 · 01-23-2013, 09:07 PM

looks good....gotta get one of those booster brackets myself once my dad is ready to do the brakes

1955 mancave · 01-24-2013, 09:47 PM

did not get much done today, i had to use another M/C , and i also mounted the prop. valve down off the frame i will try to run some more lines tomorrow.

**Captainfab** · 01-25-2013, 02:45 AM

What was the issue with the first master cylinder? That new one looks to have a fairly large bore.

1955 mancave · 01-25-2013, 08:17 AM

the only real issue is the brake line for the front port, is a 9/16 - 18 thread and i can't find one in town i have been to NAPA and all the other auto parts chain, so i had one from a 03 silverado that had the lines and they are both 1/2 thread, oh i know i could find the correct ones off another S-10 that is parting out but i had this one. (i may still look and atleast that way i have a back up)

**Captainfab** · 01-26-2013, 01:20 AM

Aaaahhhh I see

likaroc13 · 03-01-2013, 11:35 AM

Great to hear. You'll be driving that thing soon! Planning to get a 700R4 for my pickup once everything else is buttoned up. Like you, I'm also adding power steering & power disc brakes. I might not even want to drive my "modern" vehicle once the '66 is back on the road!

1955 mancave · 03-03-2013, 10:15 AM

i am hoping that it drives great when it is complete, i would sure like to make this my daily driver.

mechanixman · 06-14-2013, 02:22 PM

The truck looks fantastic!
You really did a great job.
I might have missed it, but what kind of work do you do?
At first glance I thought it was mobile welding, but then I started looking at the tools.

1955 mancave · 06-14-2013, 05:48 PM

i just play with cars. wish i made $$ but just a hobby, turning wrenches, and having fun.

Quote:

Originally Posted by mechanixman

The truck looks fantastic!
You really did a great job.
I might have missed it, but what kind of work do you do?
At first glance I thought it was mobile welding, but then I started looking at the tools.

billd5string · 06-14-2013, 03:15 PM

That is a really cool setup - very nice!!!!

Downlow2xfo · 06-14-2013, 04:31 PM

Very nice I too jus bought a 65 1 ton dually but wasn't this awesome lol... Very nice truck! Is is a hydraulic lift bed?? I'm thinking no with the low bumper but thought I'd ask.
Posted via Mobile Device

1955 mancave · 06-14-2013, 05:49 PM

just saw your truck very cool, no not a dump bed are you going to keep your dump when you slam it ?

Quote:

Originally Posted by Downlow2xfo

Very nice I too jus bought a 65 1 ton dually but wasn't this awesome lol... Very nice truck! Is is a hydraulic lift bed?? I'm thinking no with the low bumper but thought I'd ask.
Posted via Mobile Device

Downlow2xfo · 06-14-2013, 05:52 PM

Yes I am keeping the dump... Even if I have to notch for the wheels
Posted via Mobile Device

likaroc13 · 06-15-2013, 12:12 AM

Nice to see you still making progress. Looks like you're building a work truck.

**Captainfab** · 06-15-2013, 01:56 AM

Nice work Henry

JWheeler331 · 06-16-2013, 08:05 PM

Great truck and nice work on all of the mods.

01-23-2013, 06:45 PM	#1
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: 64 1ton (delivery day) ok so i have a about 10 pictures to post, so i got the steering column done, and the master cyl installed, using capt. braket worked like a charm, i did have to extend the shaft but not a big deal, some of the pictures are of the sway bar, etc. ( hey no comments on how dirty it is ! still a work truck lol) Attached Images __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

01-23-2013, 09:07 PM	#2
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 64 1ton (delivery day) looks good....gotta get one of those booster brackets myself once my dad is ready to do the brakes __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-24-2013, 09:47 PM	#3
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: 64 1ton (delivery day) did not get much done today, i had to use another M/C , and i also mounted the prop. valve down off the frame i will try to run some more lines tomorrow. Attached Images __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

01-25-2013, 02:45 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 1ton (delivery day) What was the issue with the first master cylinder? That new one looks to have a fairly large bore. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-25-2013, 08:17 AM	#5
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: 64 1ton (delivery day) the only real issue is the brake line for the front port, is a 9/16 - 18 thread and i can't find one in town i have been to NAPA and all the other auto parts chain, so i had one from a 03 silverado that had the lines and they are both 1/2 thread, oh i know i could find the correct ones off another S-10 that is parting out but i had this one. (i may still look and atleast that way i have a back up) __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

01-26-2013, 01:20 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 1ton (delivery day) Aaaahhhh I see __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-01-2013, 11:35 AM	#7
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 64 1ton (delivery day) Great to hear. You'll be driving that thing soon! Planning to get a 700R4 for my pickup once everything else is buttoned up. Like you, I'm also adding power steering & power disc brakes. I might not even want to drive my "modern" vehicle once the '66 is back on the road! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

03-03-2013, 10:15 AM	#8
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: 64 1ton (delivery day) i am hoping that it drives great when it is complete, i would sure like to make this my daily driver. __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

06-14-2013, 02:22 PM	#9
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Re: 64 1ton (delivery day) The truck looks fantastic! You really did a great job. I might have missed it, but what kind of work do you do? At first glance I thought it was mobile welding, but then I started looking at the tools. __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page

06-14-2013, 03:15 PM	#11
billd5string Registered User Join Date: Apr 2012 Location: Las Vegas, NV Posts: 80	Re: 64 1ton (delivery day) That is a really cool setup - very nice!!!! __________________ 65 C20 Fleetside longbed, 350, turbo 400, 8-lug disc brakes, power steering, air conditioning - Totaled by a guy running a red light. Pulling parts off the carcass for my next truck

06-14-2013, 04:31 PM	#12
Downlow2xfo Registered User Join Date: Jun 2013 Location: Phenix City, AL Posts: 244	Re: 64 1ton (delivery day) Very nice I too jus bought a 65 1 ton dually but wasn't this awesome lol... Very nice truck! Is is a hydraulic lift bed?? I'm thinking no with the low bumper but thought I'd ask. Posted via Mobile Device

06-14-2013, 05:52 PM	#14
Downlow2xfo Registered User Join Date: Jun 2013 Location: Phenix City, AL Posts: 244	Re: 64 1ton (delivery day) Yes I am keeping the dump... Even if I have to notch for the wheels Posted via Mobile Device

06-15-2013, 12:12 AM	#15
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 64 1ton (delivery day) Nice to see you still making progress. Looks like you're building a work truck. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

06-15-2013, 01:56 AM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 1ton (delivery day) Nice work Henry __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-16-2013, 08:05 PM	#17
JWheeler331 Registered User Join Date: Apr 2013 Location: Louisiana Posts: 553	Re: 64 1ton (delivery day) Great truck and nice work on all of the mods.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.