GA 1972 chevynne super parting out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bronze 72 super · 03-08-2013, 11:13 PM

I asked about the fuel switch, after you get the harness out, just let me know how much you want. I think I was first in line for this. Thanks Mike.

Scott>72-GMC · 03-09-2013, 12:06 AM

Just curious where was the switch on the dash for the tanks located?
Posted via Mobile Device

bronze 72 super · 03-09-2013, 12:59 AM

This switch is for the factory installed AUX FUEL tank. The one right behind the cab, on the drivers side, not the dual tanks, more commonly seen. The switch is located on the far left side of the dash. About mid way on the left. It just read how much fuel was in the tank. The floor mounted valve switch was still used to switch tanks.

Scott>72-GMC · 03-09-2013, 01:25 AM

Ic. Thanks mine had dual tanks but not sure if factory. Thanks again
Posted via Mobile Device

**tll74** · 03-09-2013, 03:32 AM

Is the ding you mention on the tailgate handle cover a half inch or so from the LH as the pic shows?

Jdhitch · 03-10-2013, 05:02 AM

How much for the Cheyenne & Super fender emblems to 98373?

Oddfire · 03-10-2013, 06:36 AM

Is the carpet any good in that truck? Jamie 71

Longhorn

**heehawracing** · 03-10-2013, 07:42 AM

the ding on the tailgate handle is on the left is small and hard to see on the truck
i have some good fenders not off this truck but on the white cst in my other post
carpet is old and no
the cheyenne super emblums i just have one side

**heehawracing** · 03-10-2013, 07:53 AM

bronze 72 super i will get that harness out today i sold a cab yesterday and had to get that off did you want just the fuel harness or the complete under dash harness thanks

mo · 03-10-2013, 07:47 PM

Hi I'm still waiting for the water pump pulley and crankshaft pulley if its a short water pump as well as the headliner pieces thank you.
Posted via Mobile Device

**DaHos** · 03-10-2013, 08:24 AM

Still waiting for info on fenders and ft bumper, thx........D'

**heehawracing** · 03-10-2013, 08:27 AM

front bumper has 3 dents fenders on this truck are no good one is rusty the other is bent i post some pictures today of the white cst fenders i have there good

Olive1970 · 03-10-2013, 10:01 AM

Quote:

Originally Posted by heehawracing

front bumper has 3 dents fenders on this truck are no good one is rusty the other is bent i post some pictures today of the white cst fenders i have there good

Sounds great, I will look for the pictures later on.

Charlie Huntington · 03-10-2013, 10:08 AM

Seat belts? - Color? Condition? Price? Thanks!

**heehawracing** · 03-10-2013, 10:50 AM

fuel switch and harness 35.00 shipped

**heehawracing** · 03-10-2013, 11:06 AM

black seat belts driver side retractor does not work pass side is fine covers are all good 60.00 shipped

bronze 72 super · 03-10-2013, 12:08 PM

Sounds good. Did you happen to get the harness that comes off the tank? If not that's fine. I'll take all that is pictured. Please send me payment information. Do you do pay pal? Also was the sticker above the switch still there? If so can you peel it off what damaging it? Thanks Mike.

**tll74** · 03-10-2013, 01:06 PM

I'll take the 72 Super tailgate handle cover. PM me for payment info. Thanks, Tom

4spd · 03-11-2013, 01:50 PM

Needing a passenger side door lock rod, if available. would possibly buy the whole latch assembly if your not willing to split?

Thanks
Posted via Mobile Device

**tll74** · 03-11-2013, 05:51 PM

Money to burn..Please PM me payment info. Thanks, Tom

**heehawracing** · 03-12-2013, 06:16 AM

Quote:

Originally Posted by 4spd

Needing a passenger side door lock rod, if available. would possibly buy the whole latch assembly if your not willing to split?

Thanks
Posted via Mobile Device

I should have one I will look today
thanks

mo · 03-11-2013, 07:55 PM

Im in for the pulleys. i'll take the 72 specific please pm me for payment info

**tll74** · 03-12-2013, 12:45 AM

Payment sent on TG handle. Thanks!

4spd · 03-12-2013, 10:35 AM

Ok thanks! Just to be clear I need the vertical rod that attaches to the lock knob on the inside of the door and the bottom connector. Thanks again
Posted via Mobile Device

Steve Laeger · 03-16-2015, 09:09 PM

How much for aux fuel tank and gas caps

03-08-2013, 11:13 PM	#1
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 chevynne super parting out I asked about the fuel switch, after you get the harness out, just let me know how much you want. I think I was first in line for this. Thanks Mike.

03-09-2013, 12:06 AM	#2
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: 1972 chevynne super parting out Just curious where was the switch on the dash for the tanks located? Posted via Mobile Device __________________ 72 GMC super custom.

03-09-2013, 12:59 AM	#3
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 chevynne super parting out This switch is for the factory installed AUX FUEL tank. The one right behind the cab, on the drivers side, not the dual tanks, more commonly seen. The switch is located on the far left side of the dash. About mid way on the left. It just read how much fuel was in the tank. The floor mounted valve switch was still used to switch tanks.

03-09-2013, 01:25 AM	#4
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: 1972 chevynne super parting out Ic. Thanks mine had dual tanks but not sure if factory. Thanks again Posted via Mobile Device __________________ 72 GMC super custom.

03-09-2013, 03:32 AM	#5
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: 1972 chevynne super parting out Is the ding you mention on the tailgate handle cover a half inch or so from the LH as the pic shows? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-10-2013, 05:02 AM	#6
Jdhitch Registered User Join Date: Jul 2012 Location: Puyallup, WA Posts: 36	Re: 1972 chevynne super parting out How much for the Cheyenne & Super fender emblems to 98373?

03-10-2013, 06:36 AM	#7
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1972 chevynne super parting out Is the carpet any good in that truck? Jamie 71 Longhorn

03-10-2013, 07:42 AM	#8
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 chevynne super parting out the ding on the tailgate handle is on the left is small and hard to see on the truck i have some good fenders not off this truck but on the white cst in my other post carpet is old and no the cheyenne super emblums i just have one side

03-10-2013, 07:53 AM	#9
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 chevynne super parting out bronze 72 super i will get that harness out today i sold a cab yesterday and had to get that off did you want just the fuel harness or the complete under dash harness thanks

03-10-2013, 07:47 PM	#10
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 1972 chevynne super parting out Hi I'm still waiting for the water pump pulley and crankshaft pulley if its a short water pump as well as the headliner pieces thank you. Posted via Mobile Device

03-10-2013, 08:24 AM	#11
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 1972 chevynne super parting out Still waiting for info on fenders and ft bumper, thx........D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-10-2013, 08:27 AM	#12
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 chevynne super parting out front bumper has 3 dents fenders on this truck are no good one is rusty the other is bent i post some pictures today of the white cst fenders i have there good

03-10-2013, 10:08 AM	#14
Charlie Huntington Registered User Join Date: Mar 2007 Location: Newcastle, ME Posts: 26	Re: 1972 chevynne super parting out Seat belts? - Color? Condition? Price? Thanks!

03-10-2013, 10:50 AM	#15
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 chevynne super parting out fuel switch and harness 35.00 shipped Attached Images

03-10-2013, 11:06 AM	#16
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 chevynne super parting out black seat belts driver side retractor does not work pass side is fine covers are all good 60.00 shipped Attached Images



Register or Log In To remove these advertisements.

03-10-2013, 12:08 PM	#17
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 chevynne super parting out Sounds good. Did you happen to get the harness that comes off the tank? If not that's fine. I'll take all that is pictured. Please send me payment information. Do you do pay pal? Also was the sticker above the switch still there? If so can you peel it off what damaging it? Thanks Mike.

03-10-2013, 01:06 PM	#18
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: 1972 chevynne super parting out I'll take the 72 Super tailgate handle cover. PM me for payment info. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-11-2013, 01:50 PM	#19
4spd Registered User Join Date: Jun 2012 Location: Frankfort, Kansas Posts: 33	Re: 1972 chevynne super parting out Needing a passenger side door lock rod, if available. would possibly buy the whole latch assembly if your not willing to split? Thanks Posted via Mobile Device __________________ 87 Chevy K20 - 350 Turbo 400 SOLD 72 Chevy K20 - 350 4spd, 2.5 skyjacker lift, 33 inch BFG's, Extreme bend hooks and Slots - SOLD 2016 85 Chevy K30 - 350 4spd

03-11-2013, 05:51 PM	#20
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: 1972 chevynne super parting out Money to burn..Please PM me payment info. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-11-2013, 07:55 PM	#22
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 1972 chevynne super parting out Im in for the pulleys. i'll take the 72 specific please pm me for payment info

03-12-2013, 12:45 AM	#23
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: 1972 chevynne super parting out Payment sent on TG handle. Thanks! __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-12-2013, 10:35 AM	#24
4spd Registered User Join Date: Jun 2012 Location: Frankfort, Kansas Posts: 33	Re: 1972 chevynne super parting out Ok thanks! Just to be clear I need the vertical rod that attaches to the lock knob on the inside of the door and the bottom connector. Thanks again Posted via Mobile Device __________________ 87 Chevy K20 - 350 Turbo 400 SOLD 72 Chevy K20 - 350 4spd, 2.5 skyjacker lift, 33 inch BFG's, Extreme bend hooks and Slots - SOLD 2016 85 Chevy K30 - 350 4spd

03-16-2015, 09:09 PM	#25
Steve Laeger Registered User Join Date: Jul 2011 Location: Rochester WA Posts: 47	Re: 1972 chevynne super parting out How much for aux fuel tank and gas caps

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.