1972 c10 conversion to a LSA powered k20 build thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my67chevytruck · 10-26-2015, 08:26 AM

swamp rat · 10-26-2015, 11:47 PM

The truck is taking shape nicely!

MetalWorks · 10-27-2015, 02:36 PM

Quote:

Originally Posted by swamp rat

The truck i taking shape nicely!

Thanks a lot...

MetalWorks · 10-27-2015, 02:39 PM

Time to assembly the chassis...

MetalWorks · 10-27-2015, 02:41 PM

More assembly...

DWilbur · 10-27-2015, 09:26 PM

Are you running a 4" lift. I'm looking at the front shackles on your truck. with no load on them other than the frame they are leaning forward slightly. I have a 6" lift and my shackles are leaning forward about 2.5" it will be interesting if yours start to lean back as they should with the weight on them.

MetalWorks · 10-29-2015, 02:20 PM

Quote:

Originally Posted by DWilbur

Are you running a 4" lift. I'm looking at the front shackles on your truck. with no load on them other than the frame they are leaning forward slightly. I have a 6" lift and my shackles are leaning forward about 2.5" it will be interesting if yours start to lean back as they should with the weight on them.

We dropped the driveline in next...and things looked about the same.

MetalWorks · 10-29-2015, 02:25 PM

We were now ready to drop in the engine and trans, but first we had to shorten the shaft to the adapter to the NP205 transfer case.

garmar · 10-29-2015, 04:12 PM

Amazing build. Love the skill and professionalism your people display in the neatness and orderly way things progress.

coopdog · 10-29-2015, 09:04 PM

very nice truck, and build

77K10Silverado · 10-29-2015, 10:21 PM

Drool!!! I'm in.

MetalWorks · 10-30-2015, 01:25 PM

Quote:

Originally Posted by garmar

Amazing build. Love the skill and professionalism your people display in the neatness and orderly way things progress.

Thanks a lot, we appreciate it.

MetalWorks · 10-30-2015, 01:31 PM

Our next step was install the transfer case to the tranny, then drop in the motor/tranny combo into the chassis. Everything was pre-fit, and our custom engine brace really worked out nice.

my67chevytruck · 10-30-2015, 04:18 PM

very nice.

MetalWorks · 11-10-2015, 08:02 PM

Wet sand and buffing the cab...

carboncrew · 11-11-2015, 09:05 AM

I always forget the build threads in 4x4 section

Just got caught up....this is very nice!!!!!

MetalWorks · 11-11-2015, 01:21 PM

Quote:

Originally Posted by carboncrew

I always forget the build threads in 4x4 section

Just got caught up....this is very nice!!!!!

Thanks a lot, yeah, we are very happy with how it's coming together.

MetalWorks · 11-11-2015, 01:23 PM

Laying down Dynamat for a nice quiet ride.

swamp rat · 11-12-2015, 12:20 AM

Looking awesome, can i borrow your crew for about 6 months?? LOL!

bilfman · 11-13-2015, 12:42 AM

Can't wait for the first burnout! I think it might have enough oomph 😉

MetalWorks · 11-17-2015, 05:52 PM

Ha ha...thanks guys.

Here we are with assembly work. Exhaust manifolds on the LSA as well as the wiring harness. We then installed the drive shaft, and wheels.

We officially have a rolling chassis!!

coopdog · 11-23-2015, 12:40 PM

What a nice truck!

Cam-Shaft · 11-23-2015, 02:28 PM

Wow, this thing is absolutely mint. Really digging the wheel/tire combo. The chrome will look sharp under the Red/White

MetalWorks · 11-23-2015, 07:48 PM

Quote:

Originally Posted by Cam-Shaft

Wow, this thing is absolutely mint. Really digging the wheel/tire combo. The chrome will look sharp under the Red/White

Thanks guys...we really appreciate the input...the truck is really coming together nice....can't wait to see it all assembled.

MetalWorks · 11-23-2015, 07:53 PM

While the chassis was being made into a roller, Heath was busy wet sanding and buffing the rest of the body components.

10-26-2015, 08:26 AM	#76
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1972 c10 conversion to a LSA powered k20 build thread __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-26-2015, 11:47 PM	#77
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 1972 c10 conversion to a LSA powered k20 build thread The truck is taking shape nicely! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's Last edited by swamp rat; 11-16-2015 at 12:41 AM.

10-27-2015, 02:39 PM	#79
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread Time to assembly the chassis... Attached Images

10-27-2015, 02:41 PM	#80
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread More assembly... Attached Images

10-27-2015, 09:26 PM	#81
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 1972 c10 conversion to a LSA powered k20 build thread Are you running a 4" lift. I'm looking at the front shackles on your truck. with no load on them other than the frame they are leaning forward slightly. I have a 6" lift and my shackles are leaning forward about 2.5" it will be interesting if yours start to lean back as they should with the weight on them.

10-29-2015, 02:25 PM	#83
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread We were now ready to drop in the engine and trans, but first we had to shorten the shaft to the adapter to the NP205 transfer case. Attached Images

10-29-2015, 04:12 PM	#84
garmar Registered User Join Date: Aug 2010 Location: Mtn View, Missouri Posts: 81	Re: 1972 c10 conversion to a LSA powered k20 build thread Amazing build. Love the skill and professionalism your people display in the neatness and orderly way things progress.

10-29-2015, 09:04 PM	#85
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: 1972 c10 conversion to a LSA powered k20 build thread very nice truck, and build __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

10-29-2015, 10:21 PM	#86
77K10Silverado Registered User Join Date: Jul 2014 Location: Winston-Salem, NC Posts: 561	Re: 1972 c10 conversion to a LSA powered k20 build thread Drool!!! I'm in. __________________ *Mike B.* 77 K10 - http://67-72chevytrucks.com/vboard/s...=1#post6752641

10-30-2015, 01:31 PM	#88
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread Our next step was install the transfer case to the tranny, then drop in the motor/tranny combo into the chassis. Everything was pre-fit, and our custom engine brace really worked out nice. Attached Images

10-30-2015, 04:18 PM	#89
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1972 c10 conversion to a LSA powered k20 build thread very nice. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-10-2015, 08:02 PM	#90
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread Wet sand and buffing the cab... Attached Images

11-11-2015, 09:05 AM	#91
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1972 c10 conversion to a LSA powered k20 build thread I always forget the build threads in 4x4 section Just got caught up....this is very nice!!!!! __________________ ________________ My very own build My tailgating ambulance

11-11-2015, 01:23 PM	#93
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread Laying down Dynamat for a nice quiet ride. Attached Images

11-12-2015, 12:20 AM	#94
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 1972 c10 conversion to a LSA powered k20 build thread Looking awesome, can i borrow your crew for about 6 months?? LOL! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's



Register or Log In To remove these advertisements.

11-13-2015, 12:42 AM	#95
bilfman Registered User Join Date: Dec 2011 Location: Regina, SK, Canada Posts: 622	Re: 1972 c10 conversion to a LSA powered k20 build thread Can't wait for the first burnout! I think it might have enough oomph 😉 __________________ 1979 Chevy Dually Crew 4X4 454, D60 Tru-trac, D70 Detroit Locker, 3.73, 4L80E/NP205 1971 GMC 3/4 Ton 4X4

11-17-2015, 05:52 PM	#96
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread Ha ha...thanks guys. Here we are with assembly work. Exhaust manifolds on the LSA as well as the wiring harness. We then installed the drive shaft, and wheels. We officially have a rolling chassis!! Attached Images

11-23-2015, 12:40 PM	#97
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: 1972 c10 conversion to a LSA powered k20 build thread What a nice truck! __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

11-23-2015, 02:28 PM	#98
Cam-Shaft Registered User Join Date: Nov 2014 Location: Vernon, CT Posts: 85	Re: 1972 c10 conversion to a LSA powered k20 build thread Wow, this thing is absolutely mint. Really digging the wheel/tire combo. The chrome will look sharp under the Red/White

11-23-2015, 07:53 PM	#100
MetalWorks Registered User Join Date: Jun 2015 Location: Eugene, Oregon Posts: 100	Re: 1972 c10 conversion to a LSA powered k20 build thread While the chassis was being made into a roller, Heath was busy wet sanding and buffing the rest of the body components. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.