PA Rippens believe it or not another 72 blazer 3ott part out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

royr · 09-12-2019, 06:45 PM

How many inches down from the opening do they need a patch? I may be able to just cut that off and attach a fuel hose. Maybe a pic if possible. Thanks

**1rippen6** · 09-12-2019, 07:45 PM

Quote:

Originally Posted by royr

How many inches down from the opening do they need a patch? I may be able to just cut that off and attach a fuel hose. Maybe a pic if possible. Thanks

I'll get you a picture this weekend.

**1rippen6** · 09-13-2019, 09:04 AM

Quote:

Originally Posted by 72blzrWA

Also interested in dashboard if it's not cut or rusted out. Thanks.

PM sent

MrGoodpliers · 09-13-2019, 10:16 AM

I found brackets locally, so all I need is the taillight section. What's your paypal address?

**1rippen6** · 09-13-2019, 10:17 AM

Quote:

Originally Posted by Martyt

Non AC--mine is very rough; pm me pictures and we can go from there. Thanks in advance. Martin

Here are 2 I have, 1 on the top has an extra hole drilled in it and also a dent. 1 on the bottom has a small piece of the corner missing.

**1rippen6** · 09-13-2019, 03:45 PM

Quote:

Originally Posted by MrGoodpliers

I found brackets locally, so all I need is the taillight section. What's your paypal address?

PP received, PM me your shipping address.

09-13-2019, 04:24 PM

1 will take the bottom one. Shipping to 92116. PM me total cost. Thx. Martin

**1rippen6** · 09-13-2019, 04:49 PM

Quote:

Originally Posted by MrGoodpliers

I found brackets locally, so all I need is the taillight section. What's your paypal address?

PP received, PM me your shipping address.

litebulblsc · 09-13-2019, 09:37 PM

Hello, do you have any good grommets for where the fuel filler tube goes through the floor? For the smaller 72 size

**1rippen6** · 09-13-2019, 09:38 PM

Quote:

Originally Posted by litebulblsc

Hello, do you have any good grommets for where the fuel filler tube goes through the floor? For the smaller 72 size

I may let me look tomorrow and I'll let you know.

70c10resto · 09-15-2019, 06:03 AM

Is the fuel filler still available? I’m using in a truck and looking for the top section only. Thanks

**1rippen6** · 09-15-2019, 08:33 AM

Quote:

Originally Posted by 70c10resto

Is the fuel filler still available? I’m using in a truck and looking for the top section only. Thanks

I should have another one I'll get you a picture.

**1rippen6** · 09-15-2019, 09:57 AM

Quote:

Originally Posted by litebulblsc

Hello, do you have any good grommets for where the fuel filler tube goes through the floor? For the smaller 72 size

I have this one 10 shipped if interested

**1rippen6** · 09-15-2019, 10:01 AM

Quote:

Originally Posted by 70c10resto

Is the fuel filler still available? I’m using in a truck and looking for the top section only. Thanks

Bottom of the neck is toast. I also have some filler boss cuts if interested.

25 neck
30 cut

**1rippen6** · 09-15-2019, 10:03 AM

I have another cut has some holes 25 for this one plus shipping on whatever you choose.

**1rippen6** · 09-15-2019, 10:05 AM

Quote:

Originally Posted by royr

How many inches down from the opening do they need a patch? I may be able to just cut that off and attach a fuel hose. Maybe a pic if possible. Thanks

I have 3 ones not pictured.

**1rippen6** · 09-15-2019, 10:39 AM

Quote:

Originally Posted by Martyt

1 will take the bottom one. Shipping to 92116. PM me total cost. Thx. Martin

25 for shipping I'll take 15 for the tray so 40 shipped plus pp fees. Let me know if you still interested. I think the one with the extra holes is in better shape. Here's a close up of the corner on the one you picked

70c10resto · 09-15-2019, 10:52 AM

I will take the filler neck

litebulblsc · 09-15-2019, 11:31 AM

Quote:

Originally Posted by 1rippen6

I have this one 10 shipped if interested

I will take it. PM me your paypal

09-15-2019, 11:59 AM

Okay, will take the better one with the extra hole. Pm me your PayPal and I will get $40 off to you via friends and family PayPal

royr · 09-15-2019, 01:01 PM

Quote:

Originally Posted by 1rippen6

I have 3 ones not pictured.

Re: intake manifold suitable for a 71 350, I'd be interested in one that I can clean up, paint and bolt on, i.e. no casting repairs. What would you need for it? thx

**1rippen6** · 09-15-2019, 05:47 PM

Quote:

Originally Posted by royr

Re: intake manifold suitable for a 71 350, I'd be interested in one that I can clean up, paint and bolt on, i.e. no casting repairs. What would you need for it? thx

Should work fine, 40 for the intake but shipping maybe expensive, its heavy.

**1rippen6** · 09-15-2019, 05:48 PM

Quote:

Originally Posted by Martyt

Okay, will take the better one with the extra hole. Pm me your PayPal and I will get $40 off to you via friends and family PayPal

Pp received should ship out Tuesday, I have plans tomorrow.

09-15-2019, 09:52 PM

Sounds good Dwayne!

royr · 09-16-2019, 11:20 AM

Quote:

Originally Posted by 1rippen6

Should work fine, 40 for the intake but shipping maybe expensive, its heavy.

Do you have a 3973469? thx

09-12-2019, 06:45 PM	#76
royr Registered User Join Date: Aug 2019 Location: ARVADA, CO Posts: 80	Re: Rippens believe it or not another 72 blazer 3ott part out How many inches down from the opening do they need a patch? I may be able to just cut that off and attach a fuel hose. Maybe a pic if possible. Thanks

09-13-2019, 10:16 AM	#79
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Rippens believe it or not another 72 blazer 3ott part out I found brackets locally, so all I need is the taillight section. What's your paypal address? __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

09-13-2019, 04:24 PM	#82
Martyt Guest Posts: n/a	Re: Rippens believe it or not another 72 blazer 3ott part out 1 will take the bottom one. Shipping to 92116. PM me total cost. Thx. Martin

09-13-2019, 09:37 PM	#84
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: Rippens believe it or not another 72 blazer 3ott part out Hello, do you have any good grommets for where the fuel filler tube goes through the floor? For the smaller 72 size

09-15-2019, 06:03 AM	#86
70c10resto Registered User Join Date: Jan 2016 Location: Ocean Springs, Mississippi Posts: 272	Re: Rippens believe it or not another 72 blazer 3ott part out Is the fuel filler still available? I’m using in a truck and looking for the top section only. Thanks

09-15-2019, 10:03 AM	#90
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Rippens believe it or not another 72 blazer 3ott part out I have another cut has some holes 25 for this one plus shipping on whatever you choose. Attached Images

09-15-2019, 10:52 AM	#93
70c10resto Registered User Join Date: Jan 2016 Location: Ocean Springs, Mississippi Posts: 272	Re: Rippens believe it or not another 72 blazer 3ott part out I will take the filler neck

09-15-2019, 11:59 AM	#95
Martyt Guest Posts: n/a	Re: Rippens believe it or not another 72 blazer 3ott part out Okay, will take the better one with the extra hole. Pm me your PayPal and I will get $40 off to you via friends and family PayPal

09-15-2019, 09:52 PM	#99
Martyt Guest Posts: n/a	Re: Rippens believe it or not another 72 blazer 3ott part out Sounds good Dwayne!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.