1969 SuperBurb build-up (Bagged and Blown!) - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boonedogs72 · 07-25-2010, 11:41 PM

looks pretty good with the coils on them but i like the bare alum...

**Hart_Rod** · 08-02-2010, 11:09 PM

Quote:

Originally Posted by dan468

I like em!!!

Thanks!

Quote:

Originally Posted by VA72C10

I think it looks good. Plus, the headers are similar color to the blower so it will break it up just enough while tying it together with the burb.

Agree,

Quote:

Originally Posted by kvn1011

i agree!! the coil does break it up just enough!! lookin good!!

Quote:

Originally Posted by jbclassix

maybe paint the fuel rails red too, add a red pinstriping design to the SC snout, black wires (red might not match hues). don't worry, my opinion cant be all that important, I have been told by my smarter half that my black door panels dont match my burb!

, one step at a time.....

Quote:

Originally Posted by mac72

Looks really good man, I'd leave em

Thanks.

Quote:

Originally Posted by 63chevyll

i have the same Lokar shifter kit, but im having trouble on my wagon, the rod is too short.

How do you like it?

Mine works fine. You can call Lokar directly and order a longer rod. (I think it's ok to say that on this site....

)

Quote:

Originally Posted by boonedogs72

looks pretty good with the coils on them but i like the bare alum...

,

smokinstang70 · 08-03-2010, 11:46 AM

What wiring harness kit did you use for the cab? What about harness for the Engine?

Thanks and GREAT BUILD... gives me a ton of motivation for my build.

**Hart_Rod** · 08-03-2010, 11:53 AM

Quote:

Originally Posted by smokinstang70

What wiring harness kit did you use for the cab? What about harness for the Engine?

Thanks and GREAT BUILD... gives me a ton of motivation for my build.

I used a Speartech Fuel Injection harness (it came with the pedal to tach module harness) and a Painless factory body harness (I think the part number is listed somewhere in this thread.) Let me know if you have any other questions

**Hart_Rod** · 08-07-2010, 11:18 AM

New windshield.....

*project 67 sub* · 08-07-2010, 05:40 PM

looking good bro i like it

sgaylord · 08-07-2010, 05:53 PM

Good progress Rob.

VA72C10 · 08-07-2010, 06:18 PM

Coming together....I'm sure it'll be an amazing feeling when that front end sheetmetal goes on for the final time. It was with my blazer even though I've only had it a short time...

mac72 · 08-07-2010, 08:15 PM

Rob,Will the burb make it to the turkey run in nov.?

Frizzle Fry · 08-07-2010, 09:38 PM

looks ok

68GMCCustom · 08-07-2010, 10:09 PM

Thats going to be one fine 'burb!

**Hart_Rod** · 08-13-2010, 08:31 AM

Quote:

Originally Posted by mac72

Rob,Will the burb make it to the turkey run in nov.?

We'll see how things go....

Quote:

Originally Posted by Frizzle Fry

looks ok

Quote:

Originally Posted by 68GMCCustom

Thats going to be one fine 'burb!

Thanks!

***
I'm making progress on the wiring, but no good pictures to post....

gcburdic · 08-13-2010, 09:02 AM

Hey Rob,

Any reason why you didn't round off the passenger side firewall???....I think portbuilt has a template for that now.....I'm just sayin'

**Hart_Rod** · 08-13-2010, 09:03 AM

Quote:

Originally Posted by gcburdic

Hey Rob,

Any reason why you didn't round off the passenger side firewall???....I think portbuilt has a template for that now.....I'm just sayin'

This is a 100 point restoration, not a hotrod build......

.

gcburdic · 08-13-2010, 09:08 AM

Duly noted!!!

atp · 08-13-2010, 11:55 AM

Quote:

Originally Posted by Hart_Rod

This is a 100 point restoration, not a hotrod build......

.

I am with you on this one - if I had to do it all over again...oh what I would do different!

sourkraut · 08-13-2010, 10:44 PM

rob, post 987 you sai dno good pic to post?? any pic of this thing is a good one imo!

mac72 · 08-13-2010, 11:22 PM

I hope you make it, I'd like to see that burb in person.

**Hart_Rod** · 08-16-2010, 09:10 AM

Quote:

Originally Posted by gcburdic

Duly noted!!!

Quote:

Originally Posted by atp

I am with you on this one - if I had to do it all over again...oh what I would do different!

, Have you got the blazer running yet? How's the move going?

Quote:

Originally Posted by sourkraut

rob, post 987 you sai dno good pic to post?? any pic of this thing is a good one imo!

Thanks, I appreciate it. I really love the way your truck is turning out. Looking forward to seeing it on the road too.....

Quote:

Originally Posted by mac72

I hope you make it, I'd like to see that burb in person.

It will be there eventually, I'm just not sure what year.....

,

.

****

Wiring, wiring and more wiring...... Believe it or not, I actually enjoy doing the wiring, BUT, it takes forever to make it look right. I'm pretty meticulous and like to tuck things in pretty tight and make them look like they belong there. I've about wrapped up the rear section (air management, fuel pump, lights, trailer harness.....next I'll be moving forward and working on my fuel injection and the engine area wires....Here's a picture of the mess.

67chevy1series · 08-16-2010, 06:06 PM

cant wait to see the front clip on

mcbassin · 08-17-2010, 08:36 AM

Looks great! I really like the red valve covers too!

Just curious if you are running Vintage air setup? When are you going to start on that install? I want to see how you do it. Also, are you going to run a rear air? You think a single air setup will cool all that area? Keep up the good work!

my67chevytruck · 08-17-2010, 10:00 AM

looking good Rob!

**Hart_Rod** · 08-22-2010, 11:10 AM

Quote:

Originally Posted by 67chevy1series

cant wait to see the front clip on

I'm getting pretty excited about that myself.

Quote:

Originally Posted by mcbassin

Looks great! I really like the red valve covers too!

Just curious if you are running Vintage air setup? When are you going to start on that install? I want to see how you do it. Also, are you going to run a rear air? You think a single air setup will cool all that area? Keep up the good work!

I'm going to run the Vintage Air Gen IV. I'll start that install after I finish most of the wiring. No rear, just the front. I think with tinted windows and all the insulation that I'm going to put in, it should be fine.

Quote:

Originally Posted by my67chevytruck

looking good Rob!

Thanks!

**Hart_Rod** · 08-31-2010, 06:24 AM

Some progress, nothing earth shattering, but the front end is starting to come together. Pics of course,

.

sourkraut · 08-31-2010, 07:43 AM

that think is so awesome! i love it!

07-25-2010, 11:41 PM	#976
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: 1969 SuperBurb build-up (Bagged and Blown!) looks pretty good with the coils on them but i like the bare alum...

08-03-2010, 11:46 AM	#978
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 1969 SuperBurb build-up (Bagged and Blown!) What wiring harness kit did you use for the cab? What about harness for the Engine? Thanks and GREAT BUILD... gives me a ton of motivation for my build.

08-07-2010, 11:18 AM	#980
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) New windshield..... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-07-2010, 05:40 PM	#981
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1969 SuperBurb build-up (Bagged and Blown!) looking good bro i like it

08-07-2010, 05:53 PM	#982
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: 1969 SuperBurb build-up (Bagged and Blown!) Good progress Rob. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

08-07-2010, 06:18 PM	#983
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1969 SuperBurb build-up (Bagged and Blown!) Coming together....I'm sure it'll be an amazing feeling when that front end sheetmetal goes on for the final time. It was with my blazer even though I've only had it a short time... __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-07-2010, 08:15 PM	#984
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob,Will the burb make it to the turkey run in nov.?

08-07-2010, 09:38 PM	#985
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 1969 SuperBurb build-up (Bagged and Blown!) looks ok

08-07-2010, 10:09 PM	#986
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thats going to be one fine 'burb! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

08-13-2010, 09:02 AM	#988
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1969 SuperBurb build-up (Bagged and Blown!) Hey Rob, Any reason why you didn't round off the passenger side firewall???....I think portbuilt has a template for that now.....I'm just sayin' __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-13-2010, 09:08 AM	#990
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1969 SuperBurb build-up (Bagged and Blown!) Duly noted!!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-13-2010, 10:44 PM	#992
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 1969 SuperBurb build-up (Bagged and Blown!) rob, post 987 you sai dno good pic to post?? any pic of this thing is a good one imo! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

08-13-2010, 11:22 PM	#993
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: 1969 SuperBurb build-up (Bagged and Blown!) I hope you make it, I'd like to see that burb in person.

08-16-2010, 06:06 PM	#995
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1969 SuperBurb build-up (Bagged and Blown!) cant wait to see the front clip on

08-17-2010, 08:36 AM	#996
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks great! I really like the red valve covers too! Just curious if you are running Vintage air setup? When are you going to start on that install? I want to see how you do it. Also, are you going to run a rear air? You think a single air setup will cool all that area? Keep up the good work! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 08-17-2010 at 08:44 AM.



Register or Log In To remove these advertisements.

08-17-2010, 10:00 AM	#997
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1969 SuperBurb build-up (Bagged and Blown!) looking good Rob! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-31-2010, 06:24 AM	#999
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) Some progress, nothing earth shattering, but the front end is starting to come together. Pics of course, . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-31-2010, 07:43 AM	#1000
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 1969 SuperBurb build-up (Bagged and Blown!) that think is so awesome! i love it! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.