Daverods project 66 - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 11-04-2009, 10:22 PM

Quote:

Originally Posted by ruffrida2005

That kit is based off of Nates kit, but it has a bunch of stuff done diffrent and better then Nates. Mostly less welded parts and better motor mounts.

You still couldn't be like me Dave I have the P-51 kit and that's the P-47

Damn.

bubba327 · 11-04-2009, 10:35 PM

Hey It is good to be home from a trip in the woods . Are you done yet??? what is the the transmission story? mine is still available.

daverod · 11-05-2009, 10:34 AM

Quote:

Originally Posted by bubba327

Hey It is good to be home from a trip in the woods . Are you done yet??? what is the the transmission story? mine is still available.

Transmission is getting fixed.

v Can't believe you gave away your truck. Now you have to go buy a different one and slam it.

Any luck chasin critters.

Pretty much decieded the 64 won't run till spring so I'm tearing into it alittle more. Going to fix my front fenders first.

bubba327 · 11-08-2009, 01:50 AM

Quote:

Originally Posted by daverod

Can't believe you gave away your truck. Now you have to go buy a different one and slam it.

Any luck chasin critters.

:

I didn't really give it a way, I will get it back if she get bored with it. And I still get to work on it!! I held out on the right to borrow it on cruise nights and for shows!! I do still have the 71 to play with,

Elk hunting is always fun!!
5 guys went and took 3 nice fifth wheels and one motor home.
Took 4 wheelers and left all the horses home.
Had 3 generators and a satellite dish for two tvs.
Watched both the Boise State football games and several other games .
Definitely did not go thirsty or hungry

watahyahknow · 11-08-2009, 06:46 AM

oh yeah the outdoors ruffin it oldstyle
bear grilles has nuttin on you guys

joe231 · 11-08-2009, 10:41 AM

Quote:

Originally Posted by ruffrida2005

That kit is based off of Nates kit, but it has a bunch of stuff done diffrent and better then Nates. Mostly less welded parts and better motor mounts.

You still couldn't be like me Dave I have the P-51 kit and that's the P-47

that is your opinion masquerading as a fact........ and it is mis-spelled to boot

daverod · 11-08-2009, 11:25 AM

Quote:

Originally Posted by bubba327

I didn't really give it a way, I will get it back if she get bored with it. And I still get to work on it!! I held out on the right to borrow it on cruise nights and for shows!! I do still have the 71 to play with,

Elk hunting is always fun!!
5 guys went and took 3 nice fifth wheels and one motor home.
Took 4 wheelers and left all the horses home.
Had 3 generators and a satellite dish for two tvs.
Watched both the Boise State football games and several other games .
Definitely did not go thirsty or hungry

Sounds like fun. Where does the spike camping in 2 feet of snow come in. Or the part about how the horses ran away with the meat and our guns.

daverod · 11-08-2009, 11:27 AM

Quote:

Originally Posted by watahyahknow

oh yeah the outdoors ruffin it oldstyle
bear grilles has nuttin on you guys

That Bear's never killed no elk. I seen him have a hard time with a pig.

Kickin it old style

daverod · 11-08-2009, 11:36 AM

Quote:

Originally Posted by joe231

that is your opinion masquerading as a fact........ and it is mis-spelled to boot

Ya Nates the MAN.

Just wish he could get a web site running.

ruffrida2005 · 11-08-2009, 09:42 PM

Quote:

Originally Posted by joe231

that is your opinion masquerading as a fact........ and it is mis-spelled to boot

well Joe I mean no disrespect to Nate. I know he puts out a kick ass product. It depends on with version also. I just think the SD kit is a little better then Nates V3 because of less welded parts and cooler motor mounts, also the way it mounts to the frame is diffrent.

The new verison Nate has with the tubes is just crazy. I really wish I had that one.

But with that being said, Both SD and PB do the same thing.

joe231 · 11-08-2009, 09:56 PM

I hear ya.....I'm just pointing out that it is an opinion

daverod · 11-09-2009, 11:39 AM

Put some metal on my truck so I could work on my bed. I want to raise it up. Needs a hatch or two in it for the compressor and tanks. I don't know if I like the full cover thing. Need to build a place for my battery. Put the brackets on my spindles and mounted my calipers.

SCOTI · 11-09-2009, 11:49 AM

Quote:

Originally Posted by ruffrida2005

That kit is based off of Nates kit, but it has a bunch of stuff done diffrent and better then Nates. Mostly less welded parts and better motor mounts.

You still couldn't be like me Dave I have the P-51 kit and that's the P-47

How are the motor-mounts better?
What else of that "bunch of stuff" is better?

daverod · 11-09-2009, 04:57 PM

Quote:

Originally Posted by SCOTI

How are the motor-mounts better?
What else of that "bunch of stuff" is better?

I don't think he said the mounts where better. They were "cooler"

No , I just looked. Did say different and better.

[img]http://www.*****************/files/P-47-63-87-Raised-Crossmember-Kit.jpg[/img]

joe231 · 11-09-2009, 06:18 PM

You have made some nice progress Dave!
Keep it up!

watahyahknow · 11-09-2009, 06:23 PM

the motormounts look slicker but less sturdy and i wonder how good headers will fit around the p type mounts

Strodder · 11-09-2009, 09:46 PM

Dave slow down. Your making us all look bad.

Trucks coming out nice.

Where did you get that idea with the exhaust coming out the rear quarters?

Looks good.

daverod · 11-09-2009, 10:01 PM

Quote:

Originally Posted by Strodder

Dave slow down. Your making us all look bad.

Trucks coming out nice.

Where did you get that idea with the exhaust coming out the rear quarters?

Looks good.

Don't worry there's about four bolts holding it all together.

Nice to see you had good weather. And thanks for the bezel thing.

Alan's Classic · 11-09-2009, 10:02 PM

It's always cool to hang sheet metal. It makes it look like progress. Nice!!

daverod · 11-09-2009, 10:05 PM

Quote:

Originally Posted by Alan's Classic

It's always cool to hang sheet metal. It makes it look like progress. Nice!!

Ya and it don't cost nothing. Parts fairy brought me some stuff the weld.

Got my snow machines done.

Strodder · 11-09-2009, 10:10 PM

Quote:

Originally Posted by daverod

Don't worry there's about four bolts holding it all together.

Nice to see you had good weather. And thanks for the bezel thing.

You call this good weather?

We went on a speed boat through the jungle, and it was raining like a *****. I'm getting pretty good at taking pictures of our self. I was driving the boat.

daverod · 11-09-2009, 10:48 PM

Nice sole patch.

Looks warm there.

watahyahknow · 11-09-2009, 11:42 PM

in the tropics the rain isnt that bad its actually nice and cooling

Strodder · 11-09-2009, 11:46 PM

Quote:

Originally Posted by watahyahknow

in the tropics the rain isnt that bad its actually nice and cooling

This rain wasn't cold, and it did feel good. It did rain hard because of the Hurricane coming that was near buy. And it got very windy.
Every day we got soaked. It was hard to dry our clothes because it was so humid. Not at all like the High Desert where I live.

MacAttack · 11-10-2009, 01:55 PM

Quote:

Originally Posted by Strodder

Not at all like the High Desert where I live.

Looks like a wet kind of rain.

11-04-2009, 10:35 PM	#1102
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Hey It is good to be home from a trip in the woods . Are you done yet??? what is the the transmission story? mine is still available. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

11-08-2009, 06:46 AM	#1105
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 oh yeah the outdoors ruffin it oldstyle bear grilles has nuttin on you guys __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-08-2009, 09:56 PM	#1111
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 I hear ya.....I'm just pointing out that it is an opinion __________________ *CHEVY ONLY*

11-09-2009, 11:39 AM	#1112
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Put some metal on my truck so I could work on my bed. I want to raise it up. Needs a hatch or two in it for the compressor and tanks. I don't know if I like the full cover thing. Need to build a place for my battery. Put the brackets on my spindles and mounted my calipers. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-09-2009, 06:18 PM	#1115
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 You have made some nice progress Dave! Keep it up! __________________ *CHEVY ONLY*

11-09-2009, 06:23 PM	#1116
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 the motormounts look slicker but less sturdy and i wonder how good headers will fit around the p type mounts __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-09-2009, 09:46 PM	#1117
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Dave slow down. Your making us all look bad. Trucks coming out nice. Where did you get that idea with the exhaust coming out the rear quarters? Looks good. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

11-09-2009, 10:02 PM	#1119
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods project 66 It's always cool to hang sheet metal. It makes it look like progress. Nice!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

11-09-2009, 10:48 PM	#1122
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Nice sole patch. Looks warm there. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-09-2009, 11:42 PM	#1123
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 in the tropics the rain isnt that bad its actually nice and cooling __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.