Daverods project 66 - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 11-10-2009, 04:58 PM

Quote:

Originally Posted by MacAttack

Looks like a wet kind of rain.

Up here it's a Dry Rain, just like the Heat.

watahyahknow · 11-10-2009, 10:14 PM

been to phoenix arizona to visit nathan at his shop , its a verry different heat all together ,
i realy wasnt used to it i usually got up at sunrize and whent back in my room at mid day to sleep cause i couldn't walk for a minute without a drink of water
whent to a carshow near there too and walked from aircoed burgerjoint to aircoed tankstation making pics along the way , i was verry impressed with the quality of those cars at the show people spend a lot of effort and cash to get there cars just right for them
i made a small clip of a 69 camaro there with an engine that sounded like it could be used as the main propulsion for the titanic

Bazooka · 11-11-2009, 12:23 AM

Wow you have got alot done..

daverod · 11-13-2009, 11:29 PM

Quote:

Originally Posted by Bazooka

Wow you have got alot done..

daverod · 11-13-2009, 11:36 PM

Put my fender patches on. Installed my transmission.

daverod · 11-13-2009, 11:41 PM

One fender was rusted in the front, just filled it with a piece of dash. Had to order some more patches for where the fenders attach to the cab. Figure I'll have about $110 for two fenders. Not to bad.

bubba327 · 11-14-2009, 12:10 AM

So what was the damage/repairs to the transmission??

daverod · 11-14-2009, 12:21 AM

Quote:

Originally Posted by bubba327

So what was the damage/repairs to the transmission??

First gear and reverse where messed up pretty bad the main thing was the gaear that drives first and reverse was missing a tooth. Got out of the place for $850. It's all together except for the linkage from the petal to the shift fork.

Can't wait to go for a drive.

bubba327 · 11-14-2009, 12:43 AM

Quote:

Originally Posted by daverod

First gear and reverse where messed up pretty bad the main thing was the gaear that drives first and reverse was missing a tooth. Got out of the place for $850. It's all together except for the linkage from the petal to the shift fork.

Can't wait to go for a drive.

Yeah I can't wait either and it is getting closer. I am about ready to start it just to hear it run again. Hooking the linkage to the carb for the kickdown detent cable is being a royal pain. the old sideways Rochester B carb is a problem . I may just upgrade to a side pull linkage 2 barrel carb or turn the "B" a quarter turn CW so the linkage pulls in line with the motor.

daverod · 11-14-2009, 12:54 PM

Suck. Got my transmission in and ready to go. Then it snows.

I told myself I would never let my trucks get wet so maybe tomorrow.

bubba327 · 11-14-2009, 03:01 PM

Snowed here too -- BSU game is on ESPNU.. so my day is set! Go Broncos!!
Take your sled out for a tour in the neighborhood!!

daverod · 11-14-2009, 07:55 PM

Quote:

Originally Posted by bubba327

Snowed here too -- BSU game is on ESPNU.. so my day is set! Go Broncos!!
Take your sled out for a tour in the neighborhood!!

Maybe tonight.

daverod · 11-18-2009, 08:58 PM

Cut out some cancer. Waiting for some patches for my fenders.

daverod · 11-18-2009, 09:05 PM

more rust work.

198plus · 11-18-2009, 10:39 PM

Man that snow is awesome looking.........All we ever get is rain, I wish it would snow knee deep here.

Quote:

Originally Posted by daverod

Suck. Got my transmission in and ready to go. Then it snows.

I told myself I would never let my trucks get wet so maybe tomorrow.

watahyahknow · 11-18-2009, 10:51 PM

trust me rain is better

daverod · 11-20-2009, 06:58 PM

Got the parts the fix my fenders. Welded it up. One side done one to go.

Nice thing about body work is it takes time and don't cost a lot.

Strodder · 11-21-2009, 12:17 AM

Good job kiddo.

daverod · 11-21-2009, 11:23 AM

Quote:

Originally Posted by Strodder

Good job kiddo.

Thanks Dennis. Doing the drivers side today.

Floor not as bad as the other side. Need to order some rockers. Just not sure what I need yet. I don't think I need a full rocker. I might just try to get by with using a door bottom. Well just got 10 lbs of wire and I need to go burn it up. I think I starting to get the hang of this welding thing. Least now I don't try to weld rust together.

I love this stuff. I wish I would have started in High School. If I would have, maybe I would have a truck I could driver by now. My goal is to be just like you. Scary huh.

Strodder · 11-21-2009, 01:12 PM

Quote:

Originally Posted by daverod

Thanks Dennis. Doing the drivers side today.

Floor not as bad as the other side. Need to order some rockers. Just not sure what I need yet. I don't think I need a full rocker. I might just try to get by with using a door bottom. Well just got 10 lbs of wire and I need to go burn it up. I think I starting to get the hang of this welding thing. Least now I don't try to weld rust together.

I love this stuff. I wish I would have started in High School. If I would have, maybe I would have a truck I could driver by now. My goal is to be just like you. Scary huh.

Very scary.

daverod · 11-21-2009, 01:33 PM

I'm sorry your truck has skin cancer.

This side is about the same.

Least the cab corner is good.

daverod · 11-21-2009, 01:37 PM

Good news we have the material ,some skills, and 10lbs of wire.

I think we can save her.

Cancer did'nt get to the bone.

Bet I took 5 lbs out of that cab support. What do they do fill them up at the factory?

Strodder · 11-21-2009, 02:24 PM

Quote:

Originally Posted by daverod

Good news we have the material ,some skills, and 10lbs of wire.

I think we can save her.

Cancer did'nt get to the bone.

Bet I took 5 lbs out of that cab support. What do they do fill them up at the factory?

What are you doing with a carpenters hammer? It that's a new a new body hammer I haven't seen yet.

ruffrida2005 · 11-21-2009, 02:27 PM

Take a lot of pics how your fixing this. I have the same problem.

watahyahknow · 11-21-2009, 03:11 PM

Quote:

Originally Posted by Strodder

Very scary.

shivy me timbers all he needs is a pipe a navy cap and some spinage and hes popeye

11-10-2009, 10:14 PM	#1127
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 been to phoenix arizona to visit nathan at his shop , its a verry different heat all together , i realy wasnt used to it i usually got up at sunrize and whent back in my room at mid day to sleep cause i couldn't walk for a minute without a drink of water whent to a carshow near there too and walked from aircoed burgerjoint to aircoed tankstation making pics along the way , i was verry impressed with the quality of those cars at the show people spend a lot of effort and cash to get there cars just right for them i made a small clip of a 69 camaro there with an engine that sounded like it could be used as the main propulsion for the titanic __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-11-2009, 12:23 AM	#1128
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Daverods project 66 Wow you have got alot done..

11-13-2009, 11:36 PM	#1130
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Put my fender patches on. Installed my transmission. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-13-2009, 11:41 PM	#1131
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 One fender was rusted in the front, just filled it with a piece of dash. Had to order some more patches for where the fenders attach to the cab. Figure I'll have about $110 for two fenders. Not to bad. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 11-13-2009 at 11:41 PM.

11-14-2009, 12:10 AM	#1132
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 So what was the damage/repairs to the transmission?? __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

11-14-2009, 12:54 PM	#1135
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Suck. Got my transmission in and ready to go. Then it snows. I told myself I would never let my trucks get wet so maybe tomorrow. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-14-2009, 03:01 PM	#1136
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Snowed here too -- BSU game is on ESPNU.. so my day is set! Go Broncos!! Take your sled out for a tour in the neighborhood!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" Last edited by bubba327; 11-14-2009 at 03:03 PM. Reason: Additional text

11-18-2009, 08:58 PM	#1138
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Cut out some cancer. Waiting for some patches for my fenders. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-18-2009, 09:05 PM	#1139
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 more rust work. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 11-18-2009 at 09:07 PM.

11-18-2009, 10:51 PM	#1141
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 trust me rain is better __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-20-2009, 06:58 PM	#1142
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Got the parts the fix my fenders. Welded it up. One side done one to go. Nice thing about body work is it takes time and don't cost a lot. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 11-20-2009 at 07:16 PM.

11-21-2009, 12:17 AM	#1143
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Good job kiddo. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

11-21-2009, 01:33 PM	#1146
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'm sorry your truck has skin cancer. This side is about the same. Least the cab corner is good. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

11-21-2009, 01:37 PM	#1147
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Good news we have the material ,some skills, and 10lbs of wire.I think we can save her. Cancer did'nt get to the bone. Bet I took 5 lbs out of that cab support. What do they do fill them up at the factory? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 11-21-2009 at 01:39 PM.

11-21-2009, 02:27 PM	#1149
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Take a lot of pics how your fixing this. I have the same problem. Attached Images __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.