MO Parting out 67 long bed step side, 283 with 3 ott. - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 12-14-2014, 05:42 PM

Quote:

Originally Posted by 74CustomK20

How much for the complete bed? I'd come n pick it up for the right price n shape...

Man, it is pretty tough. It has had a steel floor put in it at some time along the way. The fenders have some pretty impressive dents and it has a layer of leaves and acorns I have not scraped through yet. I will get you some pics as soon as I can get to the complete floor. Thanks, Fred.

74CustomK20 · 12-14-2014, 05:51 PM

It's all good Fred I'm in no hurry. I've been waiting 3 years for one for my 74 n just seen yours. The fenders will be replaced with appropriate ones anyway but I can't see myself spending 2500 on a new bed that isn't as good as an original.

**michael bustamante** · 12-14-2014, 05:58 PM

Dang i just bought another ignition a couple hours ago. Thanks though!!

**specialtyretail** · 12-14-2014, 06:02 PM

Quote:

Originally Posted by michael bustamante

Dang i just bought another ignition a couple hours ago. Thanks though!!

Dammit,, sorry about that, I never thought of the ignition switch parts being in the glove box. What is "funny" is that the glove box is usually the first thing I pilfer through. Thanks, Fred.

**specialtyretail** · 12-14-2014, 06:37 PM

Here are some pics for carguygregg and 74customK20. The floor has been replaced with steel, the fenders are banged up but the bedsides and front panel look pretty decent. I am not wanting to part it, would sell it as a whole, with the running boards, for $200.00. Thanks, Fred.

74CustomK20 · 12-14-2014, 06:58 PM

Looks good from pics? The sides and front n bottom is my worries as the fenders n steps will be replaced regardless. Looks like diamond plate? How's bottom look good?

**specialtyretail** · 12-14-2014, 07:05 PM

Quote:

Originally Posted by 74CustomK20

Looks good from pics? The sides and front n bottom is my worries as the fenders n steps will be replaced regardless. Looks like diamond plate? How's bottom look good?

You mean underneath? I have no idea. I have not been under it.

74CustomK20 · 12-14-2014, 07:17 PM

Yea underside. If the mounts and all is good and solid I'm REALLY REALLY interested,just figure out gas and time

**specialtyretail** · 12-21-2014, 04:58 PM

Quote:

Originally Posted by 74CustomK20

Yea underside. If the mounts and all is good and solid I'm REALLY REALLY interested,just figure out gas and time

I got these. The last one is the drivers side rear bedside. Thanks, Fred.

**specialtyretail** · 12-14-2014, 07:29 PM

With my work schedule, it will be next weekend before I will get a chance to get underneath it. If it is where I can sooner, i will do it. Thanks, Fred.

74CustomK20 · 12-14-2014, 07:33 PM

I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know!

**specialtyretail** · 12-14-2014, 08:52 PM

Quote:

Originally Posted by 74CustomK20

I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know!

I can work with that. I will check it out and get back with you. Thanks, Fred.

carguygregg · 12-14-2014, 07:39 PM

Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck.
Gregg

**specialtyretail** · 12-14-2014, 08:11 PM

Quote:

Originally Posted by carguygregg

Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck.
Gregg

Oh yeah, they are rough. I did not think you would want them, but I did not want to make that assumption (big word of the day) without letting you see them. Thanks, Fred.

**too much stuff** · 12-14-2014, 08:37 PM

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

**specialtyretail** · 12-14-2014, 08:41 PM

Quote:

Originally Posted by too much stuff

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

It is yours. Thanks, Fred.

**too much stuff** · 12-15-2014, 12:33 AM

Quote:

Originally Posted by too much stuff

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

Payment sent and split the fees. I forgot to add a note what the payment was for, sorry.

rockits · 12-15-2014, 12:55 AM

i would like the rearview mirror bracket if available

**specialtyretail** · 12-15-2014, 09:12 PM

Quote:

Originally Posted by too much stuff

Payment sent and split the fees. I forgot to add a note what the payment was for, sorry.

Going out Tuesday. Thanks, Fred.

jaybatta · 12-15-2014, 12:55 AM

Does the wiper motor and bug juice squirter work? How many blades are on it? What would it cost plus shipping to 59870(Stevensville, Montana)? Thanks!

**specialtyretail** · 12-15-2014, 09:14 PM

Quote:

Originally Posted by jaybatta

Does the wiper motor and bug juice squirter work? How many blades are on it? What would it cost plus shipping to 59870(Stevensville, Montana)? Thanks!

Hey Joe. Just got in from work and it is raining its ass off here. I will try to get a battery in the truck Tuesday evening and see if the wiper motor works. We will go from there. Thanks, Fred.

jaybatta · 12-15-2014, 01:07 AM

I hope I don't post twice, but I'd be interested in the wiper motor. How many prongs does it have? is it functional? Does the wiper washer fluid ..thing..work? What would you charge plus shipping to 59870(Stevensville, Montana)?
Thanks

**ScottH** · 12-15-2014, 01:27 AM

Fred, thanks for getting back to me, will let u know if I need them.

Scott

mattgoat · 12-15-2014, 01:31 AM

I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

**specialtyretail** · 12-15-2014, 04:08 PM

Quote:

Originally Posted by mattgoat

I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

Hey Matt, the bezels are yours. I would like to give another member a day or two on the cluster if you do not mind. Thanks, Fred.

12-14-2014, 05:51 PM	#2
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. It's all good Fred I'm in no hurry. I've been waiting 3 years for one for my 74 n just seen yours. The fenders will be replaced with appropriate ones anyway but I can't see myself spending 2500 on a new bed that isn't as good as an original. __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 05:58 PM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: Parting out 67 long bed step side, 283 with 3 ott. Dang i just bought another ignition a couple hours ago. Thanks though!! __________________ 1967custom

12-14-2014, 06:37 PM	#5
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 long bed step side, 283 with 3 ott. Here are some pics for carguygregg and 74customK20. The floor has been replaced with steel, the fenders are banged up but the bedsides and front panel look pretty decent. I am not wanting to part it, would sell it as a whole, with the running boards, for $200.00. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-14-2014, 06:58 PM	#6
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. Looks good from pics? The sides and front n bottom is my worries as the fenders n steps will be replaced regardless. Looks like diamond plate? How's bottom look good? __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 07:17 PM	#8
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. Yea underside. If the mounts and all is good and solid I'm REALLY REALLY interested,just figure out gas and time __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 07:29 PM	#10
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 long bed step side, 283 with 3 ott. With my work schedule, it will be next weekend before I will get a chance to get underneath it. If it is where I can sooner, i will do it. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-14-2014, 07:33 PM	#11
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know! __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 07:39 PM	#13
carguygregg Registered User Join Date: Mar 2014 Location: jefferson city, mo. Posts: 6	Re: Parting out 67 long bed step side, 283 with 3 ott. Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck. Gregg

12-14-2014, 08:37 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,820	Re: Parting out 67 long bed step side, 283 with 3 ott. Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-15-2014, 12:55 AM	#18
rockits Registered User Join Date: Aug 2014 Location: az Posts: 11	Re: Parting out 67 long bed step side, 283 with 3 ott. i would like the rearview mirror bracket if available

12-15-2014, 12:55 AM	#20
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: Parting out 67 long bed step side, 283 with 3 ott. Does the wiper motor and bug juice squirter work? How many blades are on it? What would it cost plus shipping to 59870(Stevensville, Montana)? Thanks! __________________ Joe 1968 K20 1970 K20 Semper Fi

12-15-2014, 01:07 AM	#22
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: Parting out 67 long bed step side, 283 with 3 ott. I hope I don't post twice, but I'd be interested in the wiper motor. How many prongs does it have? is it functional? Does the wiper washer fluid ..thing..work? What would you charge plus shipping to 59870(Stevensville, Montana)? Thanks __________________ Joe 1968 K20 1970 K20 Semper Fi

12-15-2014, 01:27 AM	#23
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,192	Re: Parting out 67 long bed step side, 283 with 3 ott. Fred, thanks for getting back to me, will let u know if I need them. Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-15-2014, 01:31 AM	#24
mattgoat Registered User Join Date: Oct 2009 Location: south san francisco CA Posts: 23	Re: Parting out 67 long bed step side, 283 with 3 ott. I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.