The 60-66 "PAYING IT FORWARD" thread! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LostMy65 · 08-08-2015, 09:27 PM

SM465 - Supposedly recently rebuilt.
Come get it.

LostMy65 · 09-18-2015, 06:34 PM

Quote:

Originally Posted by LostMy65

SM465 - Supposedly recently rebuilt.
Come get it.

Oregon City

**aerotruk63** · 08-10-2015, 05:36 AM

Rian, nice to see it go international.

Evoracer · 08-10-2015, 12:07 PM

Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...

blown240 · 08-12-2015, 11:43 AM

Quote:

Originally Posted by Evoracer

Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...

IF this is still available, Ill grab it. Ill send you a PM.

Evoracer · 08-13-2015, 04:18 PM

Quote:

Originally Posted by Evoracer

Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...

Rear end gone! Thanks blown240!

aggie91 · 08-13-2015, 09:22 AM

ol skool, I wish you did not live so far away. That is what I need to start my winter project...dang it...

blown240 · 08-13-2015, 04:19 PM

Thank You!

63ChevC10 · 08-20-2015, 12:36 AM

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry

Fogrocker · 09-14-2015, 02:06 PM

>>>>

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry

Did you get rid of these?
If not I could use them.

1963c-10 · 08-27-2015, 03:49 PM

How much to ship the hardware to 28306?

Jeepers Creepers · 08-27-2015, 08:27 PM

Quote:

Originally Posted by 1963c-10

How much to ship the hardware to 28306?

Hey guys, the spare tire carrier is spoken for already, sorry.

**slepysal** · 08-31-2015, 08:33 PM

I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one.
No shipping I am in San Jose .

jteck10 · 09-01-2015, 10:34 AM

Quote:

Originally Posted by slepysal

I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one.
No shipping I am in San Jose .

im in the bay area as well. how much for the windshield?

**slepysal** · 09-01-2015, 10:42 AM

Quote:

Originally Posted by jteck10

im in the bay area as well. how much for the windshield?

Since this is the pay it forward thread.......FREE!!
I'm in San Jose let me know. Let me know

vince1 · 09-02-2015, 08:47 AM

I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

Isaiah92260 · 09-05-2015, 08:56 PM

Quote:

Originally Posted by vince1

I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

You said you have a left over wiring harness? For what year? I have a 63' with gauges and I'm trying to peice back together my engine harness because a lot of it has been clipped and taped off

57chevy406 · 09-08-2015, 05:50 PM

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

oem4me · 09-08-2015, 06:41 PM

Quote:

Originally Posted by 57chevy406

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

If no takers on the complete tank, I'd be interested in the working sender.
Thanks BP

57chevy406 · 09-11-2015, 07:40 AM

Quote:

Originally Posted by 57chevy406

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

Tank is gone. Went to Bill in Daytona

**wcstory** · 09-05-2015, 08:50 PM

Taken by Rolland
I posted a free manual steering box with low mileage in the 60-66 parts forum.

Just pickup or pay shipping

Fantastic thread! Props to the OP

vince1 · 09-08-2015, 06:07 PM

These bits of harness weren't worth posting. I've wrapped them up and put them in a box.

Isaiah92260 · 09-08-2015, 11:21 PM

Quote:

Originally Posted by vince1

These bits of harness weren't worth posting. I've wrapped them up and put them in a box.

Has anyone contacted you about the wire harness yet? Would it possible for you to send it to me in Palm Desert California?

rudyyloverboiii · 09-11-2015, 12:40 AM

Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

Isaiah92260 · 09-16-2015, 08:04 PM

Quote:

Originally Posted by rudyyloverboiii

Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

Just sent you a PM!

08-08-2015, 09:27 PM	#1
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: The 60-66 "PAYING IT FORWARD" thread! SM465 - Supposedly recently rebuilt. Come get it. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-10-2015, 05:36 AM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: The 60-66 "PAYING IT FORWARD" thread! Rian, nice to see it go international. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-10-2015, 12:07 PM	#4
Evoracer Registered User Join Date: Jan 2015 Location: Anaheim, ca Posts: 120	Re: The 60-66 "PAYING IT FORWARD" thread! Putting this out there though I have not had good luck giving stuff away on this forum... 12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap... Attached Images

08-13-2015, 09:22 AM	#7
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: The 60-66 "PAYING IT FORWARD" thread! ol skool, I wish you did not live so far away. That is what I need to start my winter project...dang it... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-13-2015, 04:19 PM	#8
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: The 60-66 "PAYING IT FORWARD" thread! Thank You! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

08-20-2015, 12:36 AM	#9
63ChevC10 Registered User Join Date: Sep 2012 Location: Graham, WA Posts: 136	Re: The 60-66 "PAYING IT FORWARD" thread! I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two. Jerry

09-14-2015, 02:06 PM	#10
Fogrocker Registered User Join Date: Sep 2015 Location: Snohomish, Wa Posts: 17	Re: The 60-66 "PAYING IT FORWARD" thread! >>>> I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two. Jerry Did you get rid of these? If not I could use them.

08-27-2015, 03:49 PM	#11
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: The 60-66 "PAYING IT FORWARD" thread! How much to ship the hardware to 28306? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-31-2015, 08:33 PM	#13
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one. No shipping I am in San Jose . __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-02-2015, 08:47 AM	#16
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: The 60-66 "PAYING IT FORWARD" thread! I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

09-08-2015, 05:50 PM	#18
57chevy406 Registered User Join Date: Jan 2009 Location: Edgewater FL Posts: 19	Re: The 60-66 "PAYING IT FORWARD" thread! Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

09-05-2015, 08:50 PM	#21
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: The 60-66 "PAYING IT FORWARD" thread! Taken by Rolland I posted a free manual steering box with low mileage in the 60-66 parts forum. Just pickup or pay shipping Fantastic thread! Props to the OP Last edited by wcstory; 09-06-2015 at 05:27 PM.

09-08-2015, 06:07 PM	#22
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: The 60-66 "PAYING IT FORWARD" thread! These bits of harness weren't worth posting. I've wrapped them up and put them in a box. Attached Images

09-11-2015, 12:40 AM	#24
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: The 60-66 "PAYING IT FORWARD" thread! Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.