What did you do to your truck today!

[Navy Mechanic]

Adjusted out of wack toe in enough to drive to alignment shop tomorrow.
Threaded a brass fitting into rear end to hook up vent hose.
Centered rear end.
Installed new glove box and ash tray bumpers.

[project 67 sub]

got some more parts to fix some of my brake line issues, and some 67 armrests.

[67chevy1series]

that is an optical illusion! you think you want and need those arm rests but you dont what you need to do is send em to me!

[ItsRandy]

Removed windshield wiper motor and linkage etc. Removed windshield (in pieces). Removed kick panel vent doors. Removed headlight and wiper switch. Removed dome light. I figure I will be ready to spray over cleaner all over the inside of the cab by this weekend.
Posted via Mobile Device

[project 67 sub]

haha. and i got them both for about $12 and some change from the salvage yard, was gonna grab the fender the was really strait except the rust in the front lower corner so i ended up leaving it because of that reason

[67chevy1series]

well ill give you 15 for em was the fender the passenger side?

[project 67 sub]

Originally Posted by 67chevy1series

well ill give you 15 for em was the fender the passenger side?

you bet yah, they wanted $50 + tax for it, was gonna get it till i seen that issue.

[67chevy1series]

i have a clean 68 fender and would love to have that fender! was it rusted through the hole front cup or was it just a small peice

[project 67 sub]

almost the whole bottom of cup, poked at it a little bit after i pulled the rags out of it, and the hole started growing

[67chevy1series]

so would i need to cut the whole cup from the the body line down

[project 67 sub]

most likely

[funkytechmonkey]

What I did to my truck today....

I bought it...

[magwakeenercew2jh]

Originally Posted by funkytechmonkey

What I did to my truck today....

I bought it...

You can drive it though, huh?

Some of these days, when it's cold and wet, and generally depressing, I forget that I LIKE to wrench. On these days, I'd rather have a truck that's as nice as yours
(hell, wouldn't even have to be THAT nice) that I could tinker with if I wanted to...And drive it in the mean-time. In my experience, that's a great way to save money, too.

For me, tinkering's dangerous. It leads to the hard stuff.

That new truck of yours looks very sweet.

[cheyenne20]

Replaced the battery and added more tranny fluid. Now off to register and get new custom plates. I may also order my drop spring and leafs but gotta check the wallet first!

[project 67 sub]

got some more stuff.... some more brake line, another fitting, and a front splash pan.

[50bomb]

scraping and cleaning and sanding the susupension/chassis it is caked with dirt and all. This truck has been sitting somewhere in the desert field since late 80's or early 90's. I painted it with some cheap flat black but was kinda half butt so I am scraping it all off and starting over today.

[67Slider]

Got my KYB drop shocks in today. Got all 4 off ebay for $96 delivered. They got them on sale now for 2.50 off each of the fronts so they are 22.50-free shipping. Only bad is is took 12 days to get them.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

[ItsRandy]

Painted another front fender well, then removed all of the steel strips and wood from my bed. Bed all ready to be removed.
Posted via Mobile Device

[wwotr]

Well since the Trucks in for Interior Paint, I bought a new Steering Wheel to match the Leather seats. Then I bought a Billet "Dress-up Kit" for the Steering Column, along with a Billet Gear Selector. I'm going to buy some "bare" Interior Door Panels, and take them, the Visors and Dash pad,
all into the uhpolsters and have them cover all 3 items, to match the wheel.
Then I bought some 360 Degrees Green LED lights for my Silver Faced Autometer Gauges. Also going to pick-up some aftermarket Kick Panels/Speakers too.

[project 67 sub]

redid the rear brake lines and the one that goes down the frame rail from front to back and also made it longer. also pulled the front wheel wells to see how much cutting on the fenders im gonna need to do. no pics of the rear brake line yet, but here is the front inner fender pic of where its gonna need cut. and dont mind my indy car slick

[60ratrod]

well there's your problem right there, looks like you got a bit of rubbing.

[project 67 sub]

haha yup. and thats without the 3" drop spindles yet

[60ratrod]

wholy jeeze.

[project 67 sub]

haha i know right. thats also a 27" tall tire, think i might be pulling the front tire off the ground when laid out with my cupped arms and spindles lol.

[60ratrod]

dude with a 3" drop you won't be able to run over a sheet of paper. i can see it now "...........dear........... i need to replace the front clip again..... AGAIN?! what did you hit this time? ..........a sheet of paper.......... boys and their toys"