How about some pics of bagged C-10's - Page 59 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

colin_havens · 05-18-2011, 02:15 PM

These pics were taken on the way and down at Showfest which was held at Harrah's in Tunica, MS. It was at the convention center grounds which is across the levee from the casino, and therefore dry, where the casino was undwe water.

Strodder, absolutely! Glad you could make it to our little part of paridise in the Ozarks. Its definately not a bad place to ride, so be sure to make a run on Push Mountain while you are here. Just send me a message on here and remind me, and I can cruise on up there in the truck and say hello. River Rock Inn is all of 5 minutes from my house, so it would be cool to come up and check out the bikes.

cflvulcan · 05-24-2011, 01:16 AM

im getting closer to driving it...

**67cheby** · 05-24-2011, 09:43 AM

Nice

broey · 05-25-2011, 01:53 AM

ooohhhhh... looks who's bada$$ truck I found a video of !!!???!!!???

YouTube -...

**lolife99** · 05-25-2011, 02:07 AM

Quote:

Originally Posted by cflvulcan

im getting closer to driving it...

Very nice stepside!
What's the stats on your suspension set-up?

VDOG · 05-26-2011, 02:13 PM

Quote:

Originally Posted by abadsvt

Hey Frizzle that thing looks SICK!!!! I like it alot!

Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle!

Josh

Thats on sick stance

dnd1978 · 05-26-2011, 06:29 PM

Quote:

Originally Posted by cflvulcan

im getting closer to driving it...

Cflvulcan,

Where did you mounting your air tank and air compressor ?

ctpchevy · 05-26-2011, 09:21 PM

i may have already posted some of these but the white c10 is mine and nothin like having your dad roll a air bagged truck the green gmc is his and he wants me to take it lower so hopefully in a few months this truck will be a lil lower

DOWN TO EARTH .....so cals lowest

justpball · 05-27-2011, 06:17 PM

Quote:

Originally Posted by Strodder

justpball, post some pictures of your Suburban.

Posted via Mobile Device

**67cheby** · 05-27-2011, 06:35 PM

i would have to agree with the lisc plate

justpball · 05-28-2011, 01:36 AM

Thanks
Posted via Mobile Device

Mayo · 05-28-2011, 06:17 PM

nice burb

cflvulcan · 05-29-2011, 04:39 PM

Quote:

Originally Posted by lolife99

Very nice stepside!
What's the stats on your suspension set-up?

thank you! in the rear i have sd notches and a triangulated four link with the bags mounted on the lower links. in the front it just has stock upper a arms, cupped lower a arms and 2 1/2" dropped spindles.

cflvulcan · 05-29-2011, 04:43 PM

Quote:

Originally Posted by ctpchevy

i may have already posted some of these but the white c10 is mine and nothin like having your dad roll a air bagged truck the green gmc is his and he wants me to take it lower so hopefully in a few months this truck will be a lil lower

DOWN TO EARTH .....so cals lowest

always loved your truck!

**kev2809** · 05-29-2011, 05:08 PM

Quote:

Originally Posted by ctpchevy

i may have already posted some of these but the white c10 is mine and nothin like having your dad roll a air bagged truck the green gmc is his and he wants me to take it lower so hopefully in a few months this truck will be a lil lower

DOWN TO EARTH .....so cals lowest

nice! any build pics or suspension pics?

64shortc10 · 06-01-2011, 05:10 PM

Nice bagged out shop truck!
Tony from Norcal

BadRat Custums · 06-02-2011, 02:50 AM

well i havent posted in a long time but here is a vid of mine allmost done... ls swap i got the rims last week but they made them with the wrong lug pattern so im waitn unther 2 months im shur there 22 intro vista 2s

http://youtu.be/QD13uSF6ptM

BadRat Custums · 06-02-2011, 02:59 AM

heres a pic of mine allmost done

BadRat Custums · 06-02-2011, 03:02 AM

heres one with the rims just sitn on it

**scotts62** · 06-02-2011, 07:27 AM

Nice wheel choice! I like it

**67cheby** · 06-02-2011, 09:11 AM

the truck looks KILLER !!!

colin_havens · 06-02-2011, 08:11 PM

Quote:

Originally Posted by BadRat Custums

heres one with the rims just sitn on it

I love me some Intro Vista 2s!

Nobaddaze · 06-02-2011, 08:28 PM

Holy cow "badrat" That truck is sweet! Customer build??

**kev2809** · 06-02-2011, 08:29 PM

nice!!!

anymore pics?

BadRat Custums · 06-02-2011, 08:39 PM

shur i have plenty of pics any thing that you would like to see?? and nobaddaze no this is my build that iv been trying to finish but customers are allways first... Right?... i think..... lol

05-18-2011, 02:15 PM	#1451
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: How about some pics of bagged C-10's These pics were taken on the way and down at Showfest which was held at Harrah's in Tunica, MS. It was at the convention center grounds which is across the levee from the casino, and therefore dry, where the casino was undwe water. Strodder, absolutely! Glad you could make it to our little part of paridise in the Ozarks. Its definately not a bad place to ride, so be sure to make a run on Push Mountain while you are here. Just send me a message on here and remind me, and I can cruise on up there in the truck and say hello. River Rock Inn is all of 5 minutes from my house, so it would be cool to come up and check out the bikes.

05-24-2011, 01:16 AM	#1452
cflvulcan Registered User Join Date: Sep 2005 Location: Utica, NY Posts: 315	Re: How about some pics of bagged C-10's im getting closer to driving it... Attached Images

05-24-2011, 09:43 AM	#1453
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's Nice __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-26-2011, 09:21 PM	#1458
ctpchevy Registered User Join Date: Apr 2011 Location: gardnerville nevada Posts: 136	Re: How about some pics of bagged C-10's i may have already posted some of these but the white c10 is mine and nothin like having your dad roll a air bagged truck the green gmc is his and he wants me to take it lower so hopefully in a few months this truck will be a lil lower DOWN TO EARTH .....so cals lowest Attached Images

05-27-2011, 06:35 PM	#1460
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's i would have to agree with the lisc plate __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-28-2011, 01:36 AM	#1461
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: How about some pics of bagged C-10's Thanks Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

05-28-2011, 06:17 PM	#1462
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: How about some pics of bagged C-10's nice burb __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

06-01-2011, 05:10 PM	#1466
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: How about some pics of bagged C-10's Nice bagged out shop truck! Tony from Norcal Attached Images

06-02-2011, 02:50 AM	#1467
BadRat Custums Registered User Join Date: Oct 2008 Location: Escalon Ca Posts: 27	Re: How about some pics of bagged C-10's well i havent posted in a long time but here is a vid of mine allmost done... ls swap i got the rims last week but they made them with the wrong lug pattern so im waitn unther 2 months im shur there 22 intro vista 2s http://youtu.be/QD13uSF6ptM

06-02-2011, 02:59 AM	#1468
BadRat Custums Registered User Join Date: Oct 2008 Location: Escalon Ca Posts: 27	Re: How about some pics of bagged C-10's heres a pic of mine allmost done Attached Images

06-02-2011, 03:02 AM	#1469
BadRat Custums Registered User Join Date: Oct 2008 Location: Escalon Ca Posts: 27	Re: How about some pics of bagged C-10's heres one with the rims just sitn on it Attached Images

06-02-2011, 07:27 AM	#1470
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: How about some pics of bagged C-10's Nice wheel choice! I like it __________________ Scott 93 crew cab build Project 62

06-02-2011, 09:11 AM	#1471
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's the truck looks KILLER !!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-02-2011, 08:28 PM	#1473
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: How about some pics of bagged C-10's Holy cow "badrat" That truck is sweet! Customer build?? __________________ Hard work has a future payoff. Laziness pays off now. My Build

06-02-2011, 08:29 PM	#1474
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: How about some pics of bagged C-10's nice!!! anymore pics? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

06-02-2011, 08:39 PM	#1475
BadRat Custums Registered User Join Date: Oct 2008 Location: Escalon Ca Posts: 27	Re: How about some pics of bagged C-10's shur i have plenty of pics any thing that you would like to see?? and nobaddaze no this is my build that iv been trying to finish but customers are allways first... Right?... i think..... lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.