How about some pics of 60-66 Trucks - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dhrider75 · 06-06-2007, 10:27 PM

New to this forum so I thought I would post a pic of my 66 stepside. I just finished building the rack and painting the truck. Hope you like it.

*LILRED66* · 06-07-2007, 02:53 AM

Josh:

Send me a personal e-mail at dynamiccontracting@sbcglobal.net and I can give your some information about the '64-'66 Chevy truck chrome dog dish hub caps.

You can also check here:

www.lmctruck.com
www.bowtiebits.com
www.classicparts.com
www.oldchevytrucks.com
www.brotherstruck.com

They look like this:

Name: Chrome Dog Dish Hub Cap-01.jpg
Views: 14809
Size: 38.1 KB

Name: Chrome Dog Dish Hub Cap-01.jpg
Views: 14809
Size: 38.1 KB

fastbagged68 · 06-08-2007, 02:21 PM

Here is mine.... thinking about selling it, or fixing the issues I have with it!!!

bad_azz_65 · 06-08-2007, 10:25 PM

This is my 1965 C10 step side it has been a 6 year project. The motor is a small block and was built by gross racing it put out 430 hp and 406 ft lbs of tork. If you have any comments i would like to hear them thanks

63chevyfleet · 06-09-2007, 02:04 PM

here is my 63' chevy c10

jdboy · 06-09-2007, 08:19 PM

Here is a picture of mine. I just got the truck and am tring to figure out where to start. 64' C10 swb fleetside w/327 and 3 in the floor.

62chevy302 · 06-10-2007, 11:35 PM

here is my truck but i have the cab braced. i just need a measurement from the rocker panel next to the inner lip up to the top of the drip rail.

ludwig · 06-12-2007, 04:58 PM

The bed was made for a military trailer in 65....guess its period correct... I'm changing the rotors to 6 lugs from CPP. I just swapped in the later steering linkage but need help figuring out where to drill the holes for the Idler arm. Anyone have info?

BeerForBreakfast · 06-18-2007, 11:37 PM

My '65 C20:
http://www.flickr.com/photos/mugsys54poncho/567414503/
Rear is bagged, still need to notch. Getting ready to bag the front. Paint when I've got time.

gulfcoast66 · 06-19-2007, 10:22 AM

Heres my 1966 LWB c10 305 3speed on the floor 373 gears.

**Chevy Fleetside** · 06-19-2007, 10:00 PM

Here are some when I was driving it. I drove it for 4 years and then took it apart again..

STL_66 Chevy · 06-19-2007, 10:41 PM

heres a couple shots of my 66'
this is how it looked when i bought it 2 months ago:

this is how it looks now:

I will have some parts to bring to the board meeting swap in July! if anyone is interested

CAL 58 GMC · 06-26-2007, 12:12 AM

Quote:

Originally Posted by Frizzle Fry

Simple clean build. Looks great. I almost wish I went that route instead of off the deep-end with my 61... Well done.

Maybe so, but when yours is done it's going to be one of the trickist 61's around! I've read you build and it's going to be one bad _ss truck!!

fercho71 · 06-26-2007, 01:26 AM

nice trucks!!!!!

fercho71 · 06-28-2007, 12:57 AM

this its my working project

hewlett2002000 · 06-28-2007, 01:33 AM

hey fercho?? not to sound rude but was that truck sanded and never painted or got sunk or something? i mean it doesent look that badly rusted but it has alot of surface rust.
thanks,
John

fercho71 · 06-28-2007, 02:14 AM

i know !!!! when i got it it have been setting for 10 years so that its why the laminated rust, i just bought it 3 months ago paid only $500 for it, great deal right? yea right, i mounted a 350 engine, alternator, fix electrical system replace all brake system changed the drive shaft center support and know i found out that i need to replace the deferential after this i will finally be able to start working on the outside so far i have invested $ 4000 + 550 more on the deferential that i am going to purchase but no regrets here i am happy with my rusted bucket

PrerunnerRob · 06-28-2007, 10:36 AM

Here is mime that I am working on...

If anyone is wondering, that is not a Porterbuilt drop member, I am building my own since I can't afford Porterbuilts sweet setup!

fercho71 · 06-28-2007, 12:05 PM

nice truck prerunerrob good work !!!!!!!

Hey man that its the steering wheel that i want to get for my truck i saw the ring on eBay do you think it will fit the standard steering wheel of my 66 truck?

PrerunnerRob · 06-28-2007, 06:24 PM

Quote:

Originally Posted by fercho71

nice truck prerunerrob good work !!!!!!!

Hey man that its the steering wheel that i want to get for my truck i saw the ring on eBay do you think it will fit the standard steering wheel of my 66 truck?

I'm pretty sure the steering wheels are different, the one I have has a flat spot in the middle for the horn ring, but supposedly it is the same as an impala steering wheel. I'm not sure though!

jchav62 · 06-28-2007, 07:06 PM

Quote:

Originally Posted by Chevy Fleetside

Here are some when I was driving it. I drove it for 4 years and then took it apart again..

It's funny. My 65 (I wish I had pics) is the exact same color as this one, even has the same painted smoothie wheels with chrome caps and beauty rings...Same truck, except mine's a fleetside...and in pieces right now...I'll post pics as soon as I have them...

Nice truck!

L0WRIDE · 09-01-2007, 07:38 PM

how do we go about making this a sticky anyone????????

L0WRIDE · 09-02-2007, 12:19 AM

anyone ??

fchava · 09-02-2007, 12:29 AM

Quote:

Originally Posted by fchava

350/350 vintage air disk brakes 4.5" front drop / 4" rear.

thought I would update my engine and trans. 700R4 now.
[IMG]

[/IMG]
[IMG]

[/IMG]

60ratrod · 09-02-2007, 01:56 AM

here's some photos of mine. i still gotta get some updated photos with the "new bed" mounted

[IMG]

[/IMG]

[IMG]

[/IMG]

06-06-2007, 10:27 PM	#126
Dhrider75 Registered User Join Date: Jun 2007 Location: Petaluma CA Posts: 28	Re: Post Your Ride 60-66 Trucks New to this forum so I thought I would post a pic of my 66 stepside. I just finished building the rack and painting the truck. Hope you like it.

06-07-2007, 02:53 AM	#127
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Post Your Ride 60-66 Trucks Josh: Send me a personal e-mail at dynamiccontracting@sbcglobal.net and I can give your some information about the '64-'66 Chevy truck chrome dog dish hub caps. You can also check here: www.lmctruck.com www.bowtiebits.com www.classicparts.com www.oldchevytrucks.com www.brotherstruck.com They look like this:

06-08-2007, 02:21 PM	#128
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Post Your Ride 60-66 Trucks Here is mine.... thinking about selling it, or fixing the issues I have with it!!! Attached Images

06-08-2007, 10:25 PM	#129
bad_azz_65 New Member Join Date: Apr 2007 Location: DOG HOUSE Posts: 16	Re: Post Your Ride 60-66 Trucks This is my 1965 C10 step side it has been a 6 year project. The motor is a small block and was built by gross racing it put out 430 hp and 406 ft lbs of tork. If you have any comments i would like to hear them thanks Attached Images

06-09-2007, 02:04 PM	#130
63chevyfleet Registered User Join Date: Jun 2007 Location: san jose, california Posts: 56	Re: Post Your Ride 60-66 Trucks here is my 63' chevy c10 Attached Images

06-09-2007, 08:19 PM	#131
jdboy Registered User Join Date: May 2007 Location: East, TN Posts: 23	Re: Post Your Ride 60-66 Trucks Here is a picture of mine. I just got the truck and am tring to figure out where to start. 64' C10 swb fleetside w/327 and 3 in the floor. Attached Images

06-10-2007, 11:35 PM	#132
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Post Your Ride 60-66 Trucks here is my truck but i have the cab braced. i just need a measurement from the rocker panel next to the inner lip up to the top of the drip rail. Attached Images __________________ -1962 C-10

06-12-2007, 04:58 PM	#133
ludwig Registered User Join Date: Jul 2006 Location: LA Posts: 19	Re: Post Your Ride 60-66 Trucks The bed was made for a military trailer in 65....guess its period correct... I'm changing the rotors to 6 lugs from CPP. I just swapped in the later steering linkage but need help figuring out where to drill the holes for the Idler arm. Anyone have info? Attached Images __________________ 1965 292 4speed

06-18-2007, 11:37 PM	#134
BeerForBreakfast Registered User Join Date: Jun 2007 Location: Anywhere's Better Than Here Posts: 9	Re: Post Your Ride 60-66 Trucks My '65 C20: http://www.flickr.com/photos/mugsys54poncho/567414503/ Rear is bagged, still need to notch. Getting ready to bag the front. Paint when I've got time. Last edited by BeerForBreakfast; 06-18-2007 at 11:42 PM.

06-19-2007, 10:22 AM	#135
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Post Your Ride 60-66 Trucks Heres my 1966 LWB c10 305 3speed on the floor 373 gears.

06-19-2007, 10:00 PM	#136
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: Post Your Ride 60-66 Trucks Here are some when I was driving it. I drove it for 4 years and then took it apart again.. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

06-19-2007, 10:41 PM	#137
STL_66 Chevy Registered User Join Date: May 2007 Location: St. Louis Posts: 110	Re: Post Your Ride 60-66 Trucks heres a couple shots of my 66' this is how it looked when i bought it 2 months ago: this is how it looks now: I will have some parts to bring to the board meeting swap in July! if anyone is interested __________________ 1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates! Last edited by STL_66 Chevy; 06-19-2007 at 11:32 PM.

06-26-2007, 01:26 AM	#139
fercho71 Registered User Join Date: Jun 2007 Location: sandiego, ca Posts: 453	Re: Post Your Ride 60-66 Trucks nice trucks!!!!! __________________ 1966 chevy c-20 truck " La Chata " under construccion

06-28-2007, 12:57 AM	#140
fercho71 Registered User Join Date: Jun 2007 Location: sandiego, ca Posts: 453	Re: Post Your Ride 60-66 Trucks this its my working project Attached Images __________________ 1966 chevy c-20 truck " La Chata " under construccion

06-28-2007, 01:33 AM	#141
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: Post Your Ride 60-66 Trucks hey fercho?? not to sound rude but was that truck sanded and never painted or got sunk or something? i mean it doesent look that badly rusted but it has alot of surface rust. thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.



Register or Log In To remove these advertisements.

06-28-2007, 02:14 AM	#142
fercho71 Registered User Join Date: Jun 2007 Location: sandiego, ca Posts: 453	Re: Post Your Ride 60-66 Trucks i know !!!! when i got it it have been setting for 10 years so that its why the laminated rust, i just bought it 3 months ago paid only $500 for it, great deal right? yea right, i mounted a 350 engine, alternator, fix electrical system replace all brake system changed the drive shaft center support and know i found out that i need to replace the deferential after this i will finally be able to start working on the outside so far i have invested $ 4000 + 550 more on the deferential that i am going to purchase but no regrets here i am happy with my rusted bucket __________________ 1966 chevy c-20 truck " La Chata " under construccion

06-28-2007, 10:36 AM	#143
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: Post Your Ride 60-66 Trucks Here is mime that I am working on... If anyone is wondering, that is not a Porterbuilt drop member, I am building my own since I can't afford Porterbuilts sweet setup! Last edited by PrerunnerRob; 06-28-2007 at 10:37 AM.

06-28-2007, 12:05 PM	#144
fercho71 Registered User Join Date: Jun 2007 Location: sandiego, ca Posts: 453	Re: Post Your Ride 60-66 Trucks nice truck prerunerrob good work !!!!!!! Hey man that its the steering wheel that i want to get for my truck i saw the ring on eBay do you think it will fit the standard steering wheel of my 66 truck? __________________ 1966 chevy c-20 truck " La Chata " under construccion

09-01-2007, 07:38 PM	#147
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Post Your Ride 60-66 Trucks how do we go about making this a sticky anyone???????? __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

09-02-2007, 12:19 AM	#148
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Post Your Ride 60-66 Trucks anyone ?? __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

09-02-2007, 01:56 AM	#150
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: Post Your Ride 60-66 Trucks here's some photos of mine. i still gotta get some updated photos with the "new bed" mounted [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.