The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-26-2013, 05:57 PM   #126
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Quote:
Originally Posted by Squareforceone View Post
Did the lower bed side patch give you any issues? I'm in the middle of installing the same patch on my truck and the patch doesn't fit right the inner edge that goes into the wheel well sticks out further than the original metal and i'm not sure what to do about it

Most panels (from what I have found) are not exact. I had to trim the lower bed side panel in a few spots to make it work..... The rear corner sections had to be completely cut off.
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 04-02-2013, 04:41 AM   #127
a Good Man
Senior Member
 
a Good Man's Avatar
 
Join Date: Aug 2010
Location: FL
Posts: 2,060
Re: 1973 Gmc Cab Rebuild

next next next
__________________
MY Facebook


( saad_alhajri ) on Instagram
a Good Man is offline   Reply With Quote
Old 04-04-2013, 03:14 PM   #128
ChevySean79
Registered User
 
ChevySean79's Avatar
 
Join Date: Dec 2010
Location: Lindenhurst NY
Posts: 295
Re: 1973 Gmc Cab Rebuild

Evowerks awesome work nice to see another Long Island guy saving one of these trucks not to many around here. A friend of mine Tom lives in Northport he had a bunch of these trucks hes got a 80's k20 now with a flat bed hes a welder I don't know if you ever seen him around.I'm in the process of restoring my 78 k20. Just finally got the last piece I been searching for over 2 years a rust free dual tank round cap gas door bed. Almost ready for paint does your friend still do media blasting? I have been looking for a place that's good on the island.
Posted via Mobile Device
ChevySean79 is offline   Reply With Quote
Old 04-27-2013, 11:53 PM   #129
Brockwaykid
Registered User
 
Brockwaykid's Avatar
 
Join Date: Mar 2013
Location: Granville NY
Posts: 241
Re: 1973 Gmc Cab Rebuild

Any progress? Love it so far. looked like it was one hell of a truck back in 73!
Posted via Mobile Device
__________________
Jeff Shaw
2003 Chevy 2500HD LB7 Duramax
Brockwaykid is offline   Reply With Quote
Old 04-30-2013, 02:01 AM   #130
a Good Man
Senior Member
 
a Good Man's Avatar
 
Join Date: Aug 2010
Location: FL
Posts: 2,060
Re: 1973 Gmc Cab Rebuild

next next next
__________________
MY Facebook


( saad_alhajri ) on Instagram
a Good Man is offline   Reply With Quote
Old 05-11-2013, 06:08 PM   #131
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Sorry for the delayed response....I tend to get involved in other projects when the weather gets nice. I managed to find some time to restore the grill and headlight bezels. I should have taken some before pics of the grille. It was in about the same shape as the spare grille that I have in the background. I'll post more pics as progress develops......Thanks for everyone’s interest in my build.
Attached Images
 
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 05-11-2013, 06:21 PM   #132
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Quote:
Originally Posted by ChevySean79 View Post
Evowerks awesome work nice to see another Long Island guy saving one of these trucks not to many around here. A friend of mine Tom lives in Northport he had a bunch of these trucks hes got a 80's k20 now with a flat bed hes a welder I don't know if you ever seen him around.I'm in the process of restoring my 78 k20. Just finally got the last piece I been searching for over 2 years a rust free dual tank round cap gas door bed. Almost ready for paint does your friend still do media blasting? I have been looking for a place that's good on the island.
Posted via Mobile Device
There are a few guys around that are still into old chevys/GMCs. We've probably crossed paths,
Send me a PM and I'll give you the blasters number
.
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 05-17-2013, 11:23 PM   #133
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Carbs rebuilt...linkage adjusted....fuel feed installed.
Attached Images
  
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 05-18-2013, 12:09 AM   #134
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: 1973 Gmc Cab Rebuild

Those look awesome! What air cleaner are you going to use?
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 05-18-2013, 12:09 AM   #135
A-B Slinger
Registered User
 
A-B Slinger's Avatar
 
Join Date: Dec 2012
Location: Asotin WA
Posts: 38
Re: 1973 Gmc Cab Rebuild

Enjoying the build. Like the old tri carb set up. Reminds me of the tri carbs on my first 40 ford coupe with a 48 merc flathead. Dig the steelies. I have some NOS caps but not able to find some 6 Lugers for the 80 K10. Looking forward to tracking your progress. Very nice.
Posted via Mobile Device
A-B Slinger is offline   Reply With Quote
Old 05-18-2013, 02:00 PM   #136
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Thanks!!

Quote:
Originally Posted by 1985-GMC View Post
Those look awesome! What air cleaner are you going to use?
I'm going with 3 aluminum finned top air cleaners to tie in with the valve covers that I have. I want the motor to have a nostalgic look to it.
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 05-18-2013, 02:32 PM   #137
jon75
Registered User
 
jon75's Avatar
 
Join Date: May 2013
Location: Tustin, CA
Posts: 77
Re: 1973 Gmc Cab Rebuild

This is a great thread. It gives me encouragement to be patient with my build. I have a '75 K25 Sierra Grande that has an '86 bed on it. Kinda funny. I'm subscribed so I'll keep watching. Take care.
__________________
1975 GMC Sierra Grande K25HD 350-4BBL 4sp LWB
2009 Infiniti G37S Sedan w/Stillen sway bar kit & K&N Typhoon dual snorkel intakes

ASE certified for brakes, electrical diagnostics and heating and A/C & EPA certified in R12 and R134a
jon75 is offline   Reply With Quote
Old 05-18-2013, 04:21 PM   #138
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: 1973 Gmc Cab Rebuild

Quote:
Originally Posted by evowerks View Post
Thanks!!



I'm going with 3 aluminum finned top air cleaners to tie in with the valve covers that I have. I want the motor to have a nostalgic look to it.
Very cool, I like that style a lot!
Posted via Mobile Device
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 05-18-2013, 08:20 PM   #139
y5mgisi
Second Chance Program
 
y5mgisi's Avatar
 
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
Re: 1973 Gmc Cab Rebuild

Fk me! Dont know how i missed this build up until now, but i LOVE it! Great work! From top to bottom! Love how you cut the whole floor out. And i REALLY love that pic of it in the driveway in the 70's! What a bad ass truck!
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt.
77 C20 crew cab Silverado. 396/th400. In work.
y5mgisi is offline   Reply With Quote
Old 05-19-2013, 01:09 AM   #140
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
Re: 1973 Gmc Cab Rebuild

What a fantastic GMC restoration. I don't know how I've missed it. Beautiful truck, I love that it is original to your family, I have one 10 yrs newer that hasn't left the family.
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 05-19-2013, 02:50 PM   #141
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Thanks!!!….I appreciate all the encouraging words guys.
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 08-10-2013, 06:39 PM   #142
evowerks
Registered User
 
evowerks's Avatar
 
Join Date: May 2008
Location: Northport LI,NY
Posts: 161
Re: 1973 Gmc Cab Rebuild

Some before and after shots of the motor.........old motor: 355 4 barrel, stock heads.....freshly rebuilt motor: 383 steel forged Eagle crank and rotating assembly..Tri-power.. Edelbrock performer heads with Xtreem 4x4 Comp cam
Attached Images
    
__________________
"TRUCKS ARE WHAT WE'RE ALL ABOUT"

69 C-30 flatbed/dump on a '88 P30 chassis
70 C-30 Cab & Chassis http://67-72chevytrucks.com/vboard/s...d.php?t=291544
67 GMC Camper Cruiser cab

73 Gmc K25 Sierra Grande BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=291276
evowerks is offline   Reply With Quote
Old 08-09-2014, 09:59 PM   #143
77K10Silverado
Registered User
 
77K10Silverado's Avatar
 
Join Date: Jul 2014
Location: Winston-Salem, NC
Posts: 561
Re: 1973 Gmc Cab Rebuild

Jamming truck sir! I will be following.
77K10Silverado is offline   Reply With Quote
Old 08-16-2014, 03:36 PM   #144
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: 1973 Gmc Cab Rebuild

Wow that is nice!
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 10-29-2014, 08:27 PM   #145
77K10Silverado
Registered User
 
77K10Silverado's Avatar
 
Join Date: Jul 2014
Location: Winston-Salem, NC
Posts: 561
Re: 1973 Gmc Cab Rebuild

Any updates on Ol'gal?
77K10Silverado is offline   Reply With Quote
Old 05-18-2015, 06:33 AM   #146
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Re: 1973 Gmc Cab Rebuild

How is the progress in your build?
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 05-20-2015, 09:01 PM   #147
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: 1973 Gmc Cab Rebuild

Oh man I need that grille!
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 04-10-2016, 08:30 PM   #148
nobolt
Registered User
 
nobolt's Avatar
 
Join Date: Oct 2011
Location: Algonac, MI 48001
Posts: 1,848
Re: 1973 Gmc Cab Rebuild

I'm late to the party.......... Any news?
__________________
Dave


"... government even in its best state is but a necessary evil. Thomas Paine

"It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)
nobolt is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com