My 86 build

[3r!c84]

the new 18s look sick!!

[mooseknuckles]

Thanks man....I can't wait to get them on. Is it spring yet?

[mooseknuckles]

no new progress.......but I washed my chevy today. also trying to save up for some kind of a 4 link setup for the rear. I'm really thinking about the Porterbuilt dropmember idea....

[motornut]

spring might be comin next week heard 11 one day 14 another.......
however i've now seen the salters out tonite......down to -13 C

[Gauder the Goof]

Weather is still not too bad down in the Windsor area, although we are the furthest south part of Canada.

[maxxxy]

You have a really nice truck. Do you have any pictures or info on how you made your roll pan?
Posted via Mobile Device

[mooseknuckles]

I did have pics but my pos computer crashed! .......I had a piece of sheet metal left over from my shaved tailgate mod and cut it to length, bent a 90 in it on the work bench, then bent a few curves in it over a length of pipe to get the same shape. I welded it on and made a box for the licence plate and cut it in and welded it. It's not perfect but it was practically free!

[mooseknuckles]

Had some money saved up, then my PC died.... now that I'm starting to get out of the red again, I've been lookin at a few things....

[mooseknuckles]

Originally Posted by maxxxy

You have a really nice truck. Do you have any pictures or info on how you made your roll pan?
Posted via Mobile Device

only pics I have of the roll pan....

[notrailerqueens]

got a question for you, ok a couple.

when you did your drop b4 your front bags, did you do a notch in the back or no? and if not does she bottom out bad? did you use a flip kit or just make your own? and also when u did your flip did you relocate your shock mounts or just go to the front shocks? how bout clearance in the front with ur 3inch drop spindles? did you have any probs after cuttin your coils? did you have "chevy lean" b4 your drop?

sorry i know i just asked you like a million questions. im tryin to figure this drop thing out and you have like my ideal stance so i figured id bug yah. thanks SO much in advance! and if youd already awnsered these ?'s in a previous post and i missed it when i read through sorry.

[mooseknuckles]

Originally Posted by notrailerqueens

got a question for you, ok a couple.

when you did your drop b4 your front bags, did you do a notch in the back or no? and if not does she bottom out bad? did you use a flip kit or just make your own? and also when u did your flip did you relocate your shock mounts or just go to the front shocks? how bout clearance in the front with ur 3inch drop spindles? did you have any probs after cuttin your coils? did you have "chevy lean" b4 your drop?

sorry i know i just asked you like a million questions. im tryin to figure this drop thing out and you have like my ideal stance so i figured id bug yah. thanks SO much in advance! and if youd already awnsered these ?'s in a previous post and i missed it when i read through sorry.

No prob......I made my own flip in the back by cutting the perches off and welding them on the bottom of the axle. I never notched it then, but I took the bumpstops off, The axle never hit the frame at all unless I had something in the back. Later when I lowered the back end more by moving the spring hangers, I made a c-notch out of some 6" tubing cut in half and plated the sides. Then I had to change shocks cause the ones I had on were bottoming out. Still same shock mounts but with a set of front shocks. The front wheels would rub on the inner fenders if I hit a good bump so I took them out. The coils were ok after I cut them, but I wanted it lower so I bought bags and made some mounts. It has a bit of a lean from one side to the other maybe 1/2" or more... right now its dropped 9" in the back and about 7" in the front and hardly ever scrapes the ground.

[notrailerqueens]

Originally Posted by mooseknuckles

No prob......I made my own flip in the back by cutting the perches off and welding them on the bottom of the axle. I never notched it then, but I took the bumpstops off, The axle never hit the frame at all unless I had something in the back. Later when I lowered the back end more by moving the spring hangers, I made a c-notch out of some 6" tubing cut in half and plated the sides. Then I had to change shocks cause the ones I had on were bottoming out. Still same shock mounts but with a set of front shocks. The front wheels would rub on the inner fenders if I hit a good bump so I took them out. The coils were ok after I cut them, but I wanted it lower so I bought bags and made some mounts. It has a bit of a lean from one side to the other maybe 1/2" or more... right now its dropped 9" in the back and about 7" in the front and hardly ever scrapes the ground.

like your current pics are a 7/9? oh wow ok maybe i do wanna go lower than i thought

your flip gave you like 6 right? when you moved spring hangers did you do like a drop spring or what? how big was your notch? and your still static in the rear right?

[notrailerqueens]

wow well i have mad admiration for you now! a 7/9 is crazy! especially static in the rear. it looks amazing though! and now you really got me thinkin that i should slam mine. lol which is impressive because untill about 6 mnths ago i never wanted a droped truck.

[mooseknuckles]

Originally Posted by notrailerqueens

wow well i have mad admiration for you now! a 7/9 is crazy! especially static in the rear. it looks amazing though! and now you really got me thinkin that i should slam mine. lol which is impressive because untill about 6 mnths ago i never wanted a droped truck.

thanks...

slam it now, you'll only want to later!

[notrailerqueens]

oh one more thing. if you got one id love to see a pic with somebody standing next to her. just to get the full effect. total bummer that we live you know like at oposite ends of the continent cuz id love to see her in person

[mooseknuckles]

Originally Posted by notrailerqueens

oh one more thing. if you got one id love to see a pic with somebody standing next to her. just to get the full effect. total bummer that we live you know like at oposite ends of the continent cuz id love to see her in person

I'll see what I can do!

[notrailerqueens]

thanks!

[mooseknuckles]

I picked these bad boys up this afternoon, hopefully get at that today or tomorrow. The fenders look like they will fit perfectly if I can mount them up high enough, without hitting the hood hinge..

[maxxxy]

Cool! Those fenders will look sweet
Posted via Mobile Device

[mooseknuckles]

Thinking of getting a 4 link set up like this or something similar. This one is from Extensive.

[mooseknuckles]

or this one....from suicide doors

[nbpro]

the one from suicide doors looks bada$$

[mooseknuckles]

Yeah........I'm just trying to find a little more info on it.

[mooseknuckles]

Originally Posted by mooseknuckles

Yeah........I'm just trying to find a little more info on it.

nevermind...no longer available.

[SS Delux]

what about a trailing arm setup from cpp or porterbuilt ? you can run wider tires