OR Parting out 87 Suburban C20 454 TH400 86k - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

83GMCK2500 · 10-11-2013, 09:56 PM

Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)?

stueber68 · 10-13-2013, 10:52 PM

How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074?

Nodnarb76 · 10-15-2013, 01:00 AM

Do you still have the air intake hose that goes from the air cleaner to the radiator support?

zaccaglin · 10-18-2013, 02:22 AM

Still have the ac compressor lines that run over the top of the radiator.

**tll74** · 10-19-2013, 11:32 AM

Quote:

Originally Posted by 83GMCK2500

Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)?

140.00 for the inner and outer LH fender. Shipping would be the killer. Where is Ellensburg?

Quote:

Originally Posted by stueber68

How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074?

25.00 shipped on the switch and pigtail.

Quote:

Originally Posted by Nodnarb76

Do you still have the air intake hose that goes from the air cleaner to the radiator support?

Yes I believe so. 20.00 plus shipping

Quote:

Originally Posted by zaccaglin

Still have the ac compressor lines that run over the top of the radiator.

Yes, 40.00 plus shipping.

Thanks, Tom

legendman · 10-19-2013, 12:51 PM

Can you check and see if you have any seat belt buckles, need the ones that stand up by themselves, out of a burb with buckets. Thanks

**tll74** · 10-20-2013, 03:02 AM

Quote:

Originally Posted by legendman

Can you check and see if you have any seat belt buckles, need the ones that stand up by themselves, out of a burb with buckets. Thanks

Sorry, I don't. I looked for you awhile back and didn't have any that had good plastics, they wont stand up. I havent had any sub's since then. I'll continue to keep a eye for you. Thanks, Tom

DesertBurb88 · 10-25-2013, 12:01 PM

Do you still have passenger front door (less interior trim), passenger power door lock, and passenger front fender? If so how much to send it to 92256?

DesertBurb88 · 10-25-2013, 12:08 PM

Let me amend the question about the door all i need is the door without internals or trim kit except for the power lock mech. not the switch.

**tll74** · 10-26-2013, 11:45 AM

Quote:

Originally Posted by DesertBurb88

Let me amend the question about the door all i need is the door without internals or trim kit except for the power lock mech. not the switch.

Yes I do. 200.00 for the door shell with power lock mech and fender. Cant check shipping cost till monday. Thanks, Tom

**gmc 2500 4x4** · 01-26-2014, 04:03 PM

you still have this truck?

**tll74** · 01-27-2014, 02:59 AM

Quote:

Originally Posted by gmc 2500 4x4

you still have this truck?

Yes, your PM returned

**gmc 2500 4x4** · 01-27-2014, 07:30 AM

(Yes I do. 25.00 on the pair of wiper arms, 5.00 on the lighter. The wiring should be there (I think). Shipping 10.00. Thanks, Tom)

i'll take, can you snap a pic of these when you have time? thanx tom...

gmcdeadhead · 02-09-2014, 02:37 PM

would you happen to have the auto trans crossmember. ? thanks

**tll74** · 02-09-2014, 06:12 PM

Quote:

Originally Posted by gmcdeadhead

would you happen to have the auto trans crossmember. ? thanks

Yes I do 40.00 plus shipping.
We got hit hard with a snow storm followed up with a nice dose of freezing rain. I don't have power at home and may not till mid week. There trees on top of power lines everywhere and I live off the beaten path so I'm last on the list so...I may be slow to respond. Thanks, Tom

gmcdeadhead · 02-12-2014, 03:51 AM

if you get a chance can you send a picture of the trans crossmember, thanks

brans72 · 02-12-2014, 08:37 PM

Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?

**aotte1** · 02-13-2014, 12:47 AM

Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them?
Les

**tll74** · 02-15-2014, 02:41 PM

Quote:

Originally Posted by gmcdeadhead

if you get a chance can you send a picture of the trans crossmember, thanks

Sure I'll get a pic for you.

Quote:

Originally Posted by brans72

Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?

Yes it has been sold.

Quote:

Originally Posted by aotte1

Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them?
Les

Yes, I have them. 20.00 plus shipping.

Thanks, Tom

angertheloner · 03-31-2014, 01:59 AM

Is the grille with goodies still available?

angertheloner · 03-31-2014, 11:24 AM

Is the rear bumper straight and available? How much shipped to 78750?

brans72 · 04-02-2014, 08:17 PM

Still have the gauge/radio bezel for this truck if so shipping to 27712? Thanks Brandon

**tll74** · 04-09-2014, 12:59 AM

Quote:

Originally Posted by angertheloner

Is the grille with goodies still available?

Quote:

Originally Posted by angertheloner

Is the rear bumper straight and available? How much shipped to 78750?

Quote:

Originally Posted by brans72

Still have the gauge/radio bezel for this truck if so shipping to 27712? Thanks Brandon

Sorry Guys all of these items are sold. Thanks, Tom

MalibuSSwagon · 04-14-2014, 09:04 AM

Looking for the inner bucket seat brackets that attach to the floor if you still have them

winningz · 04-14-2014, 01:57 PM

door panels?

10-11-2013, 09:56 PM	#126
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: Parting out 87 Suburban C20 454 TH400 86k Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)? __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

10-13-2013, 10:52 PM	#127
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: Parting out 87 Suburban C20 454 TH400 86k How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074? __________________ Ugly or not it still kicks a**!

10-15-2013, 01:00 AM	#128
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Re: Parting out 87 Suburban C20 454 TH400 86k Do you still have the air intake hose that goes from the air cleaner to the radiator support? __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

10-18-2013, 02:22 AM	#129
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: Parting out 87 Suburban C20 454 TH400 86k Still have the ac compressor lines that run over the top of the radiator. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

10-25-2013, 12:01 PM	#133
DesertBurb88 Registered User Join Date: Oct 2013 Location: Morongo Valley Posts: 17	Re: Parting out 87 Suburban C20 454 TH400 86k Do you still have passenger front door (less interior trim), passenger power door lock, and passenger front fender? If so how much to send it to 92256?

10-25-2013, 12:08 PM	#134
DesertBurb88 Registered User Join Date: Oct 2013 Location: Morongo Valley Posts: 17	Re: Parting out 87 Suburban C20 454 TH400 86k Let me amend the question about the door all i need is the door without internals or trim kit except for the power lock mech. not the switch.

01-26-2014, 04:03 PM	#136
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 87 Suburban C20 454 TH400 86k you still have this truck?

01-27-2014, 07:30 AM	#138
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 87 Suburban C20 454 TH400 86k (Yes I do. 25.00 on the pair of wiper arms, 5.00 on the lighter. The wiring should be there (I think). Shipping 10.00. Thanks, Tom) i'll take, can you snap a pic of these when you have time? thanx tom...

02-09-2014, 02:37 PM	#139
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 87 Suburban C20 454 TH400 86k would you happen to have the auto trans crossmember. ? thanks

02-12-2014, 03:51 AM	#141
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 87 Suburban C20 454 TH400 86k if you get a chance can you send a picture of the trans crossmember, thanks

02-12-2014, 08:37 PM	#142
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: Parting out 87 Suburban C20 454 TH400 86k Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?

02-13-2014, 12:47 AM	#143
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Parting out 87 Suburban C20 454 TH400 86k Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them? Les

03-31-2014, 01:59 AM	#145
angertheloner Registered User Join Date: Jul 2013 Location: ATX Posts: 31	Re: Parting out 87 Suburban C20 454 TH400 86k Is the grille with goodies still available? __________________ There are 10 kinds of people in the world: those who understand binary and those who don't. __________________ 1985 C20 Scottsdale 350/SM465 1978 C10 Silverado Big 10 3 on the Tree (sold)

03-31-2014, 11:24 AM	#146
angertheloner Registered User Join Date: Jul 2013 Location: ATX Posts: 31	Re: Parting out 87 Suburban C20 454 TH400 86k Is the rear bumper straight and available? How much shipped to 78750? __________________ There are 10 kinds of people in the world: those who understand binary and those who don't. __________________ 1985 C20 Scottsdale 350/SM465 1978 C10 Silverado Big 10 3 on the Tree (sold)

04-02-2014, 08:17 PM	#147
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: Parting out 87 Suburban C20 454 TH400 86k Still have the gauge/radio bezel for this truck if so shipping to 27712? Thanks Brandon



Register or Log In To remove these advertisements.

04-14-2014, 09:04 AM	#149
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: Parting out 87 Suburban C20 454 TH400 86k Looking for the inner bucket seat brackets that attach to the floor if you still have them __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

04-14-2014, 01:57 PM	#150
winningz Registered User Join Date: Dec 2013 Location: fairbanks alaska Posts: 65	Re: Parting out 87 Suburban C20 454 TH400 86k door panels? __________________ 78 chevy scottsdale 4x4 k10 Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.