How about some pics of '73-'87 Short Beds - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoFaster · 07-14-2009, 02:28 PM

I havent been on here in a while. I have moved to San Antonio, Tx. I did pick up 78 stepper and built a 402 for it. I know I need to take some better pics. This one is from my cell phone. The spark plug has since been removed from the rad. lol it came with the truck.

puppy · 07-14-2009, 02:37 PM

It is an original Chatanooga Choo-Choo Customs truck.

Quote:

Originally Posted by babyJay

Puppy, that is a nice cleen V! Is that a stock fender emblem? It looks like it says "special edition"?

baggedcten · 07-16-2009, 01:37 AM

Quote:

Originally Posted by spankbomb

Here are some pics of my '79 I bought before July 4th. I think I want to take it all the way to the frame and go through everything instead of picking up where the PO left off.

Later,
Jon D.

Nice, there's one here (in GA) that looks exactly the same except its static dropped, yours looks bagged, same color same wheels (i think) if i see it again ill take a pic

96t/acj · 07-16-2009, 10:49 AM

New to the forum my names Chris, i have a 73 c10 pictures below. It has 55,000 miles on her, yeah I can not tell either from the pics. lol. It was an airport fueler, and has never been reg all the way back to 1973!

This is what i came to pick up for $500.

After three Hours and my pops help

menace121978 · 07-16-2009, 10:58 AM

welcome and thats actually a very nice find.

96t/acj · 07-16-2009, 11:00 AM

Thanks, yeah i'm excited about the build. By the way i love ur truck.

menace121978 · 07-16-2009, 11:11 AM

thank you, you have found an awesome place with great people and TONS of knowledge. if your going to build her up start a build thread so you have documentation for everything you do and plenty of motivation from others comments and advice.

96t/acj · 07-16-2009, 11:14 AM

i did

joe231 · 07-16-2009, 11:39 AM

Quote:

Originally Posted by 96t/acj

New to the forum my names Chris, i have a 73 c10 pictures below. It has 55,000 miles on her, yeah I can not tell either from the pics. lol. It was an airport fueler, and has never been reg all the way back to 1973!

WOW, quite a transformation!!!

looking good.
I love the slots too, it just needs an altitude adjustment

96t/acj · 07-16-2009, 11:44 AM

yeah check my build thread im gonna drop it this weekend!

joe231 · 07-16-2009, 11:50 AM

right on...where is the link

j/k I'm sure I can find it.

78BO · 07-16-2009, 12:14 PM

Quote:

Originally Posted by 96t/acj

New to the forum my names Chris, i have a 73 c10 pictures below. It has 55,000 miles on her, yeah I can not tell either from the pics. lol. It was an airport fueler, and has never been reg all the way back to 1973!

I would love a set of those old slots. I had a set on my 76 Monte Carlo with 295-50-15. It set just right.

menace121978 · 07-16-2009, 01:43 PM

Quote:

Originally Posted by 78BO

I would love a set of those old slots. I had a set on my 76 Monte Carlo with 295-50-15. It set just right.

same size i'm running... and these babies are polishing out like a chrome mirror

JohnC · 07-16-2009, 04:06 PM

Those slots are making a comeback! A lot of guys on here are running them.

babyJay · 07-16-2009, 04:12 PM

Quote:

Originally Posted by JohnC

Those slots are making a comeback! A lot of guys on here are running them.

Yes, but I don't know if you can still buy them. I tried to find a set a couple years ago. That was my fav wheel in the 80's.

menace121978 · 07-16-2009, 04:23 PM

you can still get them. theres 2 places that are still making them. let me think....... http://www.americanracing.com/browse_vintage.asp VINTAGE ANSEN SPRINT POLISHED

seldomseen65 · 07-16-2009, 04:27 PM

but where can i get these slotted wheels,,I've seen some in catalogs for like $2500.00 a set, or more ,,when i asked about them they told me that they no longer handled them,,sucks,,, maybe Stockton wheels in, California would have them ??
they're down by Sacramento on hwy 99, in Stockton, ca.
good luck guys,, get back with me if you find some ,,

JohnC · 07-16-2009, 04:30 PM

Menace has a link to ones that look similar to the ones that are pictured above. Are those the ones you are talking about?

seldomseen65 · 07-16-2009, 04:34 PM

Quote:

Originally Posted by menace121978

you can still get them. theres 2 places that are still making them. let me think....... http://www.americanracing.com/browse_vintage.asp VINTAGE ANSEN SPRINT POLISHED

thanks menace; I'm going to check that out for damn sure see what i find OK,, thanks again,,
larry

menace;;i just checked with the zip code ,,out here in the middle of no where there's a big-O store,, thanks I'm going to check this out ,, great web site we have here . thanks again.

Larry

thanks to you again John C,

menace121978 · 07-16-2009, 04:37 PM

anytime buddy... just type in your zip code on that web site and they will give you the closest places. my closest place was like .02 miles

so you should be able to find them. fwiw i need the center caps!!

seldomseen65 · 07-16-2009, 04:38 PM

Quote:

Originally Posted by JohnC

Menace has a link to ones that look similar to the ones that are pictured above. Are those the ones you are talking about?

cool menace I'll do that

yeah John C; just what I've been looking for, I'll get them 15x8 ,,4.5 back space,,6x5.5 bolt pattern,

good idea center caps,,and i found some wheels here in pahrump, Nevada, at the local Big- O tire place,, $157.00 each,, back ordered for 6 months right now,,so i can wait,
thanks again for you info. and thanks Menace for your info also
Larry

ROLLIN' TOPLEZZ · 07-16-2009, 07:13 PM

73' 4x4

JohnC · 07-17-2009, 08:00 AM

Clean looking truck you have there.

85sqbdy · 07-17-2009, 02:05 PM

been making some progress on the '85. here are some new pics.

87Lowrider · 07-17-2009, 03:53 PM

Quote:

Originally Posted by babyJay

I'd say 44's or 49's is real close....Sweeettttt Sweeeetttt Trucks there!

Yes, they are 49's... mine makes his look taller and his makes mine look lower!!

They will both be on display next weekend at the KY meet!

Kenny

07-14-2009, 02:28 PM	#1626
MoFaster Registered User Join Date: Jan 2009 Location: San Antonio, Tx Posts: 38	Re: How about some pics of '73-'87 Short Beds I havent been on here in a while. I have moved to San Antonio, Tx. I did pick up 78 stepper and built a 402 for it. I know I need to take some better pics. This one is from my cell phone. The spark plug has since been removed from the rad. lol it came with the truck. Attached Images __________________ 78 Stepper Big Block http://i62.photobucket.com/albums/h1...19-09_1639.jpg *Dont brake till you see God!!*

07-16-2009, 10:49 AM	#1629
96t/acj Registered User Join Date: Jul 2009 Location: San jose ca Posts: 29	Re: How about some pics of '73-'87 Short Beds New to the forum my names Chris, i have a 73 c10 pictures below. It has 55,000 miles on her, yeah I can not tell either from the pics. lol. It was an airport fueler, and has never been reg all the way back to 1973! This is what i came to pick up for $500. After three Hours and my pops help Last edited by 96t/acj; 07-16-2009 at 10:51 AM.

07-16-2009, 10:58 AM	#1630
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: How about some pics of '73-'87 Short Beds welcome and thats actually a very nice find. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-16-2009, 11:00 AM	#1631
96t/acj Registered User Join Date: Jul 2009 Location: San jose ca Posts: 29	Re: How about some pics of '73-'87 Short Beds Thanks, yeah i'm excited about the build. By the way i love ur truck.

07-16-2009, 11:11 AM	#1632
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: How about some pics of '73-'87 Short Beds thank you, you have found an awesome place with great people and TONS of knowledge. if your going to build her up start a build thread so you have documentation for everything you do and plenty of motivation from others comments and advice. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-16-2009, 11:14 AM	#1633
96t/acj Registered User Join Date: Jul 2009 Location: San jose ca Posts: 29	Re: How about some pics of '73-'87 Short Beds i did

07-16-2009, 11:44 AM	#1635
96t/acj Registered User Join Date: Jul 2009 Location: San jose ca Posts: 29	Re: How about some pics of '73-'87 Short Beds yeah check my build thread im gonna drop it this weekend!

07-16-2009, 11:50 AM	#1636
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of '73-'87 Short Beds right on...where is the link j/k I'm sure I can find it. __________________ *CHEVY ONLY*

07-16-2009, 04:06 PM	#1639
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: How about some pics of '73-'87 Short Beds Those slots are making a comeback! A lot of guys on here are running them.

07-16-2009, 04:23 PM	#1641
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: How about some pics of '73-'87 Short Beds you can still get them. theres 2 places that are still making them. let me think....... http://www.americanracing.com/browse_vintage.asp VINTAGE ANSEN SPRINT POLISHED __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list Last edited by menace121978; 07-16-2009 at 04:24 PM.

07-16-2009, 04:27 PM	#1642
seldomseen65 spirit rider66 Join Date: Oct 2008 Location: pahrump, nevada, in the bowels of the Mojave desert Posts: 291	Re: How about some pics of '73-'87 Short Beds but where can i get these slotted wheels,,I've seen some in catalogs for like $2500.00 a set, or more ,,when i asked about them they told me that they no longer handled them,,sucks,,, maybe Stockton wheels in, California would have them ?? they're down by Sacramento on hwy 99, in Stockton, ca. good luck guys,, get back with me if you find some ,, __________________ :Chevy: If you don't run your own life,, some one else will. to our vets,, welcome home,, and thank you for your service.:Chevy:

07-16-2009, 04:30 PM	#1643
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: How about some pics of '73-'87 Short Beds Menace has a link to ones that look similar to the ones that are pictured above. Are those the ones you are talking about?

07-16-2009, 04:37 PM	#1645
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: How about some pics of '73-'87 Short Beds anytime buddy... just type in your zip code on that web site and they will give you the closest places. my closest place was like .02 miles so you should be able to find them. fwiw i need the center caps!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-16-2009, 07:13 PM	#1647
ROLLIN' TOPLEZZ Registered User Join Date: Jun 2009 Location: L.A. CA. Posts: 111	Re: How about some pics of '73-'87 Short Beds 73' 4x4 Attached Images

07-17-2009, 08:00 AM	#1648
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: How about some pics of '73-'87 Short Beds Clean looking truck you have there.



Register or Log In To remove these advertisements.

07-17-2009, 02:05 PM	#1649
85sqbdy Registered User Join Date: Jul 2008 Location: Orange,Texas Posts: 99	Re: How about some pics of '73-'87 Short Beds been making some progress on the '85. here are some new pics. __________________ if it ain't broke, fix it until it is.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.