Daverods project 66 - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 04-28-2010, 08:18 PM

Quote:

Originally Posted by Strodder

When you use the POR-15 make sure it's in a clean environment because it dries very show and will collect dirt. Especially in a dry climate. Where it's humid it dries faster. And mix it really good to get all the deposits from the bottom.

Think a qt will be enough?

Did'nt you have a problem with the shine? I'm going to get semi gloss?

Strodder · 04-28-2010, 08:23 PM

Yes, but it might have been because I didn't mix it good enough. I think a qt should do it if you use a brush. Just make it as smooth as you can with the brush. Watch for runs.

daverod · 04-28-2010, 08:26 PM

Quote:

Originally Posted by scotts62

Yeah im with you there dude

Least you have some nice wheels and tires.

**scotts62** · 04-28-2010, 08:36 PM

Quote:

Originally Posted by daverod

Least you have some nice wheels and tires.

Wheels maybe but i wouldnt look too close at the tires if your impressed with them

daverod · 04-28-2010, 08:43 PM

Quote:

Originally Posted by scotts62

Wheels maybe but i wouldnt look too close at the tires if your impressed with them

Well they look good from the side.

I'm going to see if I can get 20" to fit. I like the looks of yours.

**scotts62** · 04-28-2010, 09:02 PM

thats what she said..

Yeah i like them because they are simple and not too blingy.

ruffrida2005 · 04-28-2010, 09:49 PM

If you guys are just feeling broke this month yall are doing good. I'm always feeling broke.

Strodder · 04-28-2010, 10:26 PM

Dave, there always good deals on E-Bay, or Craigs List. People are in dire straights, and are giving things away.

daverod · 04-29-2010, 10:02 AM

Quote:

Originally Posted by ruffrida2005

If you guys are just feeling broke this month yall are doing good. I'm always feeling broke.

Least you have a job and steady check.

daverod · 04-29-2010, 10:10 AM

Finally got my 64 running again. The oil pan gasket kicked my a$$. If anyone is thinking about doing this job be prepared. I had to jack up both sides of the motor up about 2" still could'nt get the pan off. Ended up just cleaning it up while it was still in place and put the new gasket on. When I went to put the engine mount bolts back on I stripped one.

Good thing is they only cost about $6. Filled it up with royal purple and ran a can of sea foam threw it. Runs great no leaks. I'm a happy camper

ruffrida2005 · 04-29-2010, 01:16 PM

Quote:

Originally Posted by daverod

Least you have a job and steady check.

Not for long though. I'm getting a med board so I'll be out in about another 4 months.

daverod · 04-29-2010, 02:56 PM

Well then you won't have a job but you'll still get a disability check and unemployment forever. Look on the good side you should get a lot done on your truck. Get started on the body work, muds cheap. Could have a bad back and no checks or health insurance.

**scotts62** · 04-29-2010, 05:51 PM

Yeah could be a ton worse..

daverod · 04-29-2010, 06:59 PM

Decided to go with the POR15 for my frame. I think I made a good choice.

Auto paint store had it in stock. Paints on really nice, kinda like water. Just have to watch for runs. Qt should be plenty for my frame.

**scotts62** · 04-29-2010, 07:00 PM

Get it on your hands and it has to wear off so look out

daverod · 04-29-2010, 07:10 PM

Ya I figured as much. Laquear thinner cleaned it right up. Paint guy said to put plastic over the can before I put the lid on or I would never get it off again.

**scotts62** · 04-29-2010, 07:25 PM

yeah that would be about right, then the next time use a screw driver and knock a hole in it

daverod · 04-29-2010, 07:28 PM

daverod · 05-02-2010, 09:36 PM

Painted stuff all weekend. . Took about 3 coats of por15 to get it to look right. Painted my engine and trans.

. Still need to box in the back of my frame where my notches are and paint my spindles.

protrash64 · 05-02-2010, 09:42 PM

Looks good Daverod!!!!!!! I think I'd feel right at home in your garage.

ruffrida2005 · 05-02-2010, 09:48 PM

Looks really good man. so when you gonna get it all done now?

protrash64 · 05-02-2010, 09:50 PM

Quote:

Originally Posted by ruffrida2005

Looks really good man. so when you gonna get it all done now?

Im betting on page 70.

daverod · 05-02-2010, 09:54 PM

Page 70 would be nice. If I have the thing painted by next year at this time I'll be happy. Still have to buy a lot of stuff and stuff.

Like a real compressor so I can paint. Looking at one at Lowes for 800.

daverod · 05-02-2010, 10:08 PM

2 fenders,tailgate,wiring harness,radiator,bumpers,posi rear end, 650 carb., tires,wheels, 2 air compressors,lines,valves,controll unit,air compressor, paint gun, paint, door skins?, seats,floor mat,sound dampener, rubber seals doors/winshield, bed cover. Hell ya 10,000 and I'll be done.

Oh ya and another 5000 for the stuff I forgot.
2 fenders 500
tailgate 300
harness 400
rad/fan 400
bumpers 400
posi 500
carb 350
tires/wheels 2000
compressors 600
lines/valves contol 1000
compressor 800
paint gun 300
paint 500
seats 150
mat 120
sound 100
rubber seals 300
bed cover 800
Oh hell thats got be close to 10

ruffrida2005 · 05-02-2010, 10:14 PM

man we spend way too much on our trucks to not be worth that much

04-28-2010, 08:23 PM	#1627
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Yes, but it might have been because I didn't mix it good enough. I think a qt should do it if you use a brush. Just make it as smooth as you can with the brush. Watch for runs. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-28-2010, 09:02 PM	#1631
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 thats what she said.. Yeah i like them because they are simple and not too blingy. __________________ Scott 93 crew cab build Project 62

04-28-2010, 09:49 PM	#1632
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 If you guys are just feeling broke this month yall are doing good. I'm always feeling broke. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-28-2010, 10:26 PM	#1633
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Dave, there always good deals on E-Bay, or Craigs List. People are in dire straights, and are giving things away. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-29-2010, 10:10 AM	#1635
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Finally got my 64 running again. The oil pan gasket kicked my a$$. If anyone is thinking about doing this job be prepared. I had to jack up both sides of the motor up about 2" still could'nt get the pan off. Ended up just cleaning it up while it was still in place and put the new gasket on. When I went to put the engine mount bolts back on I stripped one. Good thing is they only cost about $6. Filled it up with royal purple and ran a can of sea foam threw it. Runs great no leaks. I'm a happy camper __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-29-2010 at 11:07 AM.

04-29-2010, 02:56 PM	#1637
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Well then you won't have a job but you'll still get a disability check and unemployment forever. Look on the good side you should get a lot done on your truck. Get started on the body work, muds cheap. Could have a bad back and no checks or health insurance. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-29-2010 at 02:57 PM.

04-29-2010, 05:51 PM	#1638
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 Yeah could be a ton worse.. __________________ Scott 93 crew cab build Project 62

04-29-2010, 06:59 PM	#1639
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Decided to go with the POR15 for my frame. I think I made a good choice. Auto paint store had it in stock. Paints on really nice, kinda like water. Just have to watch for runs. Qt should be plenty for my frame. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-29-2010, 07:00 PM	#1640
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 Get it on your hands and it has to wear off so look out __________________ Scott 93 crew cab build Project 62

04-29-2010, 07:10 PM	#1641
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Ya I figured as much. Laquear thinner cleaned it right up. Paint guy said to put plastic over the can before I put the lid on or I would never get it off again. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-29-2010, 07:25 PM	#1642
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 yeah that would be about right, then the next time use a screw driver and knock a hole in it __________________ Scott 93 crew cab build Project 62

04-29-2010, 07:28 PM	#1643
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-02-2010, 09:36 PM	#1644
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Painted stuff all weekend. . Took about 3 coats of por15 to get it to look right. Painted my engine and trans. . Still need to box in the back of my frame where my notches are and paint my spindles. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-02-2010, 09:42 PM	#1645
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Daverods project 66 Looks good Daverod!!!!!!! I think I'd feel right at home in your garage. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-02-2010, 09:48 PM	#1646
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Looks really good man. so when you gonna get it all done now? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

05-02-2010, 09:54 PM	#1648
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Page 70 would be nice. If I have the thing painted by next year at this time I'll be happy. Still have to buy a lot of stuff and stuff. Like a real compressor so I can paint. Looking at one at Lowes for 800. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-02-2010, 10:08 PM	#1649
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 2 fenders,tailgate,wiring harness,radiator,bumpers,posi rear end, 650 carb., tires,wheels, 2 air compressors,lines,valves,controll unit,air compressor, paint gun, paint, door skins?, seats,floor mat,sound dampener, rubber seals doors/winshield, bed cover. Hell ya 10,000 and I'll be done. Oh ya and another 5000 for the stuff I forgot. 2 fenders 500 tailgate 300 harness 400 rad/fan 400 bumpers 400 posi 500 carb 350 tires/wheels 2000 compressors 600 lines/valves contol 1000 compressor 800 paint gun 300 paint 500 seats 150 mat 120 sound 100 rubber seals 300 bed cover 800 Oh hell thats got be close to 10 __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 05-02-2010 at 10:29 PM.

05-02-2010, 10:14 PM	#1650
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 man we spend way too much on our trucks to not be worth that much __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.