What parts aren't out there? - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Primer69er · 03-05-2007, 03:45 PM

Quote:

Originally Posted by mike nutt

primer69er, US BODY SOURCE sell a glass hood that fits the '69 c/10

i know but i just think 800 bones is a bit steep for fiberglass.

1LoC10 · 03-05-2007, 04:08 PM

I guess you didnt see my post...lol

tallhoedude · 03-05-2007, 04:20 PM

Quote:

Originally Posted by Tri-ProAutomotive

Does anyone have a Blazer windshield frame; and how much of the top of it normally needs to be replaced?

i have a few in rough shape,so far only one decent one.i am in indiana,woudl be willing to help where i can.would LOVE!!! to be able to buy a new steel one.

jb4short · 03-05-2007, 04:50 PM

Quote:

Originally Posted by tallhoedude

i have a few in rough shape,so far only one decent one.i am in indiana,woudl be willing to help where i can.would LOVE!!! to be able to buy a new steel one.

I appreciate the help; hold off for now...someone volunteered a good one- let's see if it makes it here. A pretty pristine cowl came in today and is leaving for Taiwan tonight.

Kudos to Mike Duffy for bringing over a nice '67-'68 grille frame! Thanks Mike!

I may have some pictures for you in the morning....no promises...but requested.

WHO'S GOT A SWB Step or Fleetside truck I can buy for a shop truck? I've got a new crate motor and tranny sitting here looking for a home....not worried about missing body parts. HELP!

**Hart_Rod** · 03-05-2007, 05:19 PM

Quote:

Originally Posted by Tri-ProAutomotive

WHO'S GOT A SWB Step or Fleetside truck I can buy for a shop truck? I've got a new crate motor and tranny sitting here looking for a home....not worried about missing body parts. HELP!

Probably not what you are looking for, but.......

http://67-72chevytrucks.com/vboard/s...d.php?t=220957
http://67-72chevytrucks.com/vboard/c...ct=1318&cat=10

jb4short · 03-05-2007, 05:24 PM

Quote:

Originally Posted by Hart_Rod

Probably not what you are looking for, but.......

http://67-72chevytrucks.com/vboard/s...d.php?t=220957
http://67-72chevytrucks.com/vboard/c...ct=1318&cat=10

Nice! I was thinking 67-68 builder for about 3K

ERASER5 · 03-05-2007, 06:07 PM

A Tach/Vac tin for the dash so I can install a second factory looking temp gauge for the tranny. I do not believe anyone is making this part.

A volt meter that looks just like the factory amp meter. Yea, I know, this is not a stamped part, but I want one.

chops333 · 03-05-2007, 08:29 PM

im pretty sure no one makes stepside rear bumper brackets i need some also a front bumper bracket that doesnt have to be modified for power sterring swap

jb4short · 03-05-2007, 09:19 PM

Quote:

Originally Posted by chops333

im pretty sure no one makes stepside rear bumper brackets i need some also a front bumper bracket that doesnt have to be modified for power sterring swap

Which bracket set exactly? It might be the Budweiser talking but I thought there's two sets....can't remember what the difference is but I'll look.

fourty1 · 03-05-2007, 09:47 PM

I think somebody oughta step up and fab some stainless steel ones. Plain, brushed, polished, done right they would last forever, no rust, no rivets to loosed...
I glass beaded my stockers, and rebuilt them. Worked good for about a month...a few lingering glass beads killed the metal to metal joints! Search continues,....
posted by metalmassfab ,,.
.........and I second the motion !!!
jim

chops333 · 03-05-2007, 10:26 PM

Quote:

Originally Posted by Tri-ProAutomotive

Which bracket set exactly? It might be the Budweiser talking but I thought there's two sets....can't remember what the difference is but I'll look.

the 67-72 stepside rear brackets are different from the67-72 fleetside rear brackets fleetside brackets are made and are readily available but not for stepsides

jb4short · 03-06-2007, 07:54 PM

If someone has a decent set of stepside rear bumper brackets let me know what you need out of them (maybe swap for a part?) and I'll see if we can't get those done...seems like a "No-Brainer"

**jaros44sr** · 03-06-2007, 08:34 PM

Hey TriPro, please ask them to stamp the steel in a heavier gauge steel, that way when it rusts, it will take longer...
Just a thought..

jb4short · 03-06-2007, 08:44 PM

Quote:

Originally Posted by jaros44

Hey TriPro, please ask them to stamp the steel in a heavier gauge steel, that way when it rusts, it will take longer...
Just a thought..

Everything we make is 19ga. or better...I've been in the aftermarket parts industry for over thirteen years and know what you mean...but I don't think it applies to our products.

If you know of parts that you can't find a decent replacement for let me know and maybe we can work on an improved version.

Draggn66 · 03-06-2007, 08:52 PM

Quote:

Originally Posted by ERASER5

A volt meter that looks just like the factory amp meter. Yea, I know, this is not a stamped part, but I want one.

Now that right there is a great idea IMO

**jaros44sr** · 03-07-2007, 07:37 AM

Quote:

Originally Posted by Tri-ProAutomotive

Everything we make is 19ga. or better...I've been in the aftermarket parts industry for over thirteen years and know what you mean...but I don't think it applies to our products.

If you know of parts that you can't find a decent replacement for let me know and maybe we can work on an improved version.

Thanks for the answer, and your time. Are you allowed to make repo parts exactly the same as original parts? I had heard they have tobe slightly differant... J.

jb4short · 03-07-2007, 07:42 AM

Quote:

Originally Posted by jaros44

Thanks for the answer, and your time. Are you allowed to make repo parts exactly the same as original parts? I had heard they have tobe slightly differant... J.

That's a pretty common misconception. The goal is to always make it exactly as the original unless it's intended to be a "Performance" part. On some of the gates and other parts we do pay licensing fees to GM to use trademarked logos and designs; this is how we can put "Chevrolet", "GMC", etc. on the parts. GM doesn't always accept the application for licensing (like on the '69-'70 grille frame) but this is normally due to them still offering the part themselves.

**Hart_Rod** · 03-07-2007, 08:52 AM

How about the 3rd door for the Suburbans? While your at it, you can go ahead and make the 4th door too.

meathead95 · 03-07-2007, 09:18 AM

how about the gravel shields for a 1972 blazer

cstanley · 03-07-2007, 10:12 AM

Quote:

Originally Posted by meathead95

how about the gravel shields for a 1972 blazer

that there is a fine idea. i think mine is just a piece of 1x4, but it should be corrected.

a 4th sub door would also rock! (i don't have a 'burb, but if i did, i'd want one.)

sevt_chevelle · 03-07-2007, 10:13 AM

TriPro,
I had already voted for the LWB boxsides, hint hint, but can you tell us what parts from this list of suggestions that you are probably gonna do?
Thanks...Eric

jb4short · 03-07-2007, 10:16 AM

Quote:

Originally Posted by sevt_chevelle

TriPro,
I had already voted for the LWB boxsides, hint hint, but can you tell us what parts from this list of suggestions that you are probably gonna do?
Thanks...Eric

I'll post pictures of some pieces next week. We do have some recent introductions ('67-'68 and '69-'72 dash and toe panels); and when I find out where I should post them I will.

seanu · 03-07-2007, 11:27 AM

Ok...here's my thoughts.

It seems like about half of the cab is being repoduced now, this maybe from various vendors..(not sure on that one)..but it doesn't seem like it would be far from the range of work to produce a complete cab shell? Does it?

Here's what I know if being reproduced now for the cab:

Complete floor
Inner Rockers
Outer Rocker
Rear Corners
Front Corners
Drip Rail
Inside front roof edge
Floor/Firewall section

Why not take the extra steps and do a complete cab? Think about it...all the patch work time/money that could be saved!!

Other thoughts are:

Bed floors (both LWB & SWB)
Cowl panel (both stock & smoothed)
Complete a/c dash
Windshield patch sections (if not going to do whole cab)
Some kind of better replacement hood hinges (maybe billet? but that would bolt on as stock)

That's about all I can think of at this time....

Now, lets see some photos of those prototypes!

John @ BROTHERS · 03-07-2007, 11:58 AM

Ok guys. We have at least one of the items your seem to be looking for. We have the "core support" patch. This will replace the rusted or corroted section of the core support right below the battery box. Here is a link to the part on our website.
http://www.brothersonlinestore.com/p...number=RSP72RH

Be sure to also check out our "New Items" page for the newest parts available.

**PICKMUP** · 03-07-2007, 12:46 PM

Way to go, Brothers...that's good service! Now can you hurry up and get the other items we need that fast, too? LOL

I'll second the request for better inner rocker repair that has about 4" of outer floor included. We get calls for that continuously.

03-05-2007, 04:08 PM	#152
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: What parts aren't out there? I guess you didnt see my post...lol __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-05-2007, 06:07 PM	#157
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: What parts aren't out there? A Tach/Vac tin for the dash so I can install a second factory looking temp gauge for the tranny. I do not believe anyone is making this part. A volt meter that looks just like the factory amp meter. Yea, I know, this is not a stamped part, but I want one. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

03-05-2007, 08:29 PM	#158
chops333 Registered User Join Date: Aug 2005 Location: mount airy n.c. Posts: 243	Re: What parts aren't out there? im pretty sure no one makes stepside rear bumper brackets i need some also a front bumper bracket that doesnt have to be modified for power sterring swap

03-05-2007, 09:47 PM	#160
fourty1 Registered User Join Date: Dec 2006 Location: washington state Posts: 144	Re: What parts aren't out there? I think somebody oughta step up and fab some stainless steel ones. Plain, brushed, polished, done right they would last forever, no rust, no rivets to loosed... I glass beaded my stockers, and rebuilt them. Worked good for about a month...a few lingering glass beads killed the metal to metal joints! Search continues,.... posted by metalmassfab ,,. .........and I second the motion !!! jim __________________ 1941 Chevy 1/2 ton Street Rod: 327 cu,/350 auto, 'Stinger ' - JULY 2007 CUSTOM CLASSIC TRUCK magazine. 1967 Chevy 3/4 ton standard bed, 350 cu./400 auto, w/ 83 - 3:43 rear end...sips gas....

03-06-2007, 07:54 PM	#162
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: What parts aren't out there? If someone has a decent set of stepside rear bumper brackets let me know what you need out of them (maybe swap for a part?) and I'll see if we can't get those done...seems like a "No-Brainer"

03-06-2007, 08:34 PM	#163
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,801	Re: What parts aren't out there? Hey TriPro, please ask them to stamp the steel in a heavier gauge steel, that way when it rusts, it will take longer... Just a thought.. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-07-2007, 08:52 AM	#168
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,863	Re: What parts aren't out there? How about the 3rd door for the Suburbans? While your at it, you can go ahead and make the 4th door too. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-07-2007, 09:18 AM	#169
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: What parts aren't out there? how about the gravel shields for a 1972 blazer __________________ 72 2wd blazer 72 swb 4x4

03-07-2007, 10:13 AM	#171
sevt_chevelle Lost amongst the CORN Join Date: Nov 2002 Location: Northern Iowa Posts: 1,071	Re: What parts aren't out there? TriPro, I had already voted for the LWB boxsides, hint hint, but can you tell us what parts from this list of suggestions that you are probably gonna do? Thanks...Eric __________________ Currently working on How To Videos and custom metal 70 Chevelle gettin Sliced and Diced Anything But STOCK 70 Chevelle SS455 not a typo its a BUICK BABY 49 and 72 Chevy Trucks restored to original...close to it Drommer Stor....Norwegian for Dream Big http://s969.photobucket.com/albums/a...lle/?start=all https://www.flickr.com/photos/47922830@N03/ Pictures of my work and projects

03-07-2007, 11:27 AM	#173
seanu Too many projects!!! Join Date: Jul 2000 Location: Jacksonville, Florida Posts: 508	Re: What parts aren't out there? Ok...here's my thoughts. It seems like about half of the cab is being repoduced now, this maybe from various vendors..(not sure on that one)..but it doesn't seem like it would be far from the range of work to produce a complete cab shell? Does it? Here's what I know if being reproduced now for the cab: Complete floor Inner Rockers Outer Rocker Rear Corners Front Corners Drip Rail Inside front roof edge Floor/Firewall section Why not take the extra steps and do a complete cab? Think about it...all the patch work time/money that could be saved!! Other thoughts are: Bed floors (both LWB & SWB) Cowl panel (both stock & smoothed) Complete a/c dash Windshield patch sections (if not going to do whole cab) Some kind of better replacement hood hinges (maybe billet? but that would bolt on as stock) That's about all I can think of at this time.... Now, lets see some photos of those prototypes! __________________ Sean 1995 Buick Roadmaster Sedan 2004 Chevy Trailblazer 5.3L V8 1963 Chevy Biscayne 4D Sedan 1971 Chevy C10 (now have 70 cab & frame) 1968 Chevy C10 (parts for the 70) 1991 Oldsmobile Custom Cruiser (Chevy 355 motor) 1937 Pontiac 8 4D Touring Sedan (in pieces) Jacksonville, Florida

03-07-2007, 11:58 AM	#174
John @ BROTHERS Registered User Join Date: Jul 2000 Location: Corona, CA Posts: 310	Re: What parts aren't out there? Ok guys. We have at least one of the items your seem to be looking for. We have the "core support" patch. This will replace the rusted or corroted section of the core support right below the battery box. Here is a link to the part on our website. http://www.brothersonlinestore.com/p...number=RSP72RH Be sure to also check out our "New Items" page for the newest parts available. __________________ 1967 Chevy Short/Fleet 1969 Chevy Short/Step 2004.5 Dodge 2500 4x4 Cummins 6spd

03-07-2007, 12:46 PM	#175
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,166	Re: What parts aren't out there? Way to go, Brothers...that's good service! Now can you hurry up and get the other items we need that fast, too? LOL I'll second the request for better inner rocker repair that has about 4" of outer floor included. We get calls for that continuously.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.