58 TRUK intro

[DransportGarage]

Originally Posted by _Ogre

<snip>
hrpt here i come

Have a great time, Ogre! I'll look for you in the mag. Be sure to smile and show your Ogre teeth!

[_Ogre]

truk was in hot rod magazine last yr after the power tour
i guess you could say, truk is famous, me not so, i'm off the pic on the right side
this picture was in hot rod magazine september issue i think
and on the hotrod.com site

truk is back row in the center

[_Ogre]

hot rod magazine took a picture of every vehicle as it left the long haulers party and posted it on the site
http://www.hotrod.com/eventcoverage/...photo_800.html

[AUSSIE54]

Another fantastic shot of your truk, Ogre. The stance you have there looks just so right. What a beautiful piece of machinery!

Hope you have a great run and all goes smoothly.

Trently.
Posted via Mobile Device

[_Ogre]

thanks aussie
i'm just glad that the weather is good again so i can drive it.
they use a lot of salt on the roads in michigan for melting ice
as our touring season starts, yours comes to an end

hot rod power tour starts on june 2nd, runs approx 1600 miles in 7 days
all headed away from home, so i'll double that getting back
double my fun

[_Ogre]

i've been driving truk with just angle iron seat pedestals for a couple of years
pass side has a drawer to replace the shaved glove box


since i know fiberglass, i thought i would make covers for them...
i started on the pass side, the seat sides were beige at one time, i had paint left over to color match them to the seats


drawer open

[_Ogre]

i use cardboard, tape and scraps of wood to make the shape and then glass over everything
makes it a little rough to start with, but a little filler and everything comes out.
first i made the piece behind the seat belt, cut the back at an angle so i could still get my battery out



and then the drawer. i eliminated the handle, it didn't look right and i could just just grab the bottom lip to open it.
makes it almost invisible

[_Ogre]

the drivers side has no drawer, the cable loop is for opening the gass door in the rear fender



finished product



some of the built in features
i'm a gimp, cane holder



gas door lever, push in and the lever pops out, a little pull and the gas door pops open



this is the form before glassing, wood, foil, cardboard and a lot of tape



this really finishes the interior off, i think it looks marvelous

[DransportGarage]

The wizard does it again!

[55Cameo]

Came out great nice work. I had thought of putting some in front of the seats or in the rocker steps.

You did a great job

[Kim57]

Very nice.
Kim

[_Ogre]

thanks guys, i appreciate the kind words.
of coarse i had to show everybody today

i may have to repo my radiator cover from the painter

[oldcouple]

Suppose you could turn that cane holder into a 12ga holder.


Funny, when I went to school, in rural Idaho, every pickup had a gunrack in it with rifles and shotguns year round, even in the school parking lot.

[_Ogre]

and all the guys carried pocket knives
i wonder how they carve their initials into the desk anymore?

my sawed off is way too short to fit into the holder ...

[DransportGarage]

Originally Posted by _Ogre

and all the guys carried pocket knives
i wonder how they carve their initials into the desk anymore?

my sawed off is way too short to fit into the holder ...

Never pass up a good excuse to buy more weaponry!

[AUSSIE54]

G'day Ogre,

Exquisite job on those seat frame covers. Just as slick as the rest of your truk. I'm wondering if you'd made your own cane? Love your work.

Trently.
Posted via Mobile Device

[_Ogre]

thanks aussie.
i'm running out of stuff to do on truk, other than drive it
fiberglassing is easy peasy, it's the body work to get it paint ready that drives me up the wall

my sister-in-law made the cane 10 yrs ago from wood on my property, ash stick w/ black walnut handle.
she recently became my ex-sister-in-law, i guess i'll be making the next one myself

[sgtusmc]

You possess an unreal amount of talent. And because of my jealousy we could never become friends Sir!

[_Ogre]

thanks sgt, no real talent, just unlimited tenacity

[_Ogre]

nothing really wrong or ugly about my engine bay or area around my radiator.
just a lot of ''stuff'' on the sides of the radiator, ac dryer, dual horns, fan relay, over flow tank, wires, etc...
6 weeks ago (back in post 121) i made a radiator cover out of fiberglass
finally got it back from my painter, woohoo! (i do everything but final paint)
he did a mavelouse paint job

before


after






the cover really finishes off the engine bay, i might have to make a cover for the cap hole.
it mounts off the 2 top radiator bolts, with a little foam weather strip to keep it off the finish paint on the inner fenders.

[Barney Rubble]

nice n tidy.
Love your 'unlimited tenacity'. New catchphrase.
Scott

[Kim57]

That came out nice Ogre.
Kim

[_Ogre]

thanks guys.

i don't send out much, paint being the only repeat offender.
i hate when i loose control of a process and have to wait on someone else.
same with my seat upholstery, that guy had me on hold for 4 mths

[sgtusmc]

Very nice! I'm sure you could make a lot of coin, selling those radiator covers.

[_Ogre]

thanks sgt, but...

but then i wouldn't have a one off radiator cover
i don't have many original ideas, this might be one of them
(now everyone will post a pic of a similar rad cover)

plus making one for a stranger would be like having a job...