My Facetruck thread. - Page 76 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Boog** · 03-10-2019, 08:12 PM

Way back in the early 70s I had a '56 Ford truck and at someone's suggestion i checked into the special tags. The lady dropped a large book in front of me and said here's anything you need to know about what vehicles qualify for special tags. I didn't go very far until I knew i didn't want to go that route. I'm like Tim in that I don't want anybody telling me how I can use my vehicles.
I won't get personalized plates either.
A man I once worked for had his name on his plates and drove fast most everywhere he went. After being stopped for speeding one day he decided he really didn't need to tell everyone who that speeding car belonged to.

**special-K** · 03-11-2019, 09:03 PM

We have historic as well as street rod tags, yet with historic there is nothing that says it has to be original. I think street rod has nothing to do with age, maybe. In other words, it could be a later model vehicle that was modified to where it isn't street legal by that year's standards... including emissions. I know you have to have a minimum of 18 modifications. I never looked into it.

powerdriver · 03-11-2019, 10:49 PM

Day to Day stuff huh . Bus mechanic . We have annual D.O.T Inspections . They come in and take over the shop bringing their own jacks and equipment . I just get out of their way . 2 weeks prep time . Had window chips that needed fixed .

Some other minor stuff . If you have one corner of one exit decal blown loose its
a fail . All Three small bus lots I take care of were there . 47 units total . Tough on the nerves and at 60 years old I don't know if I want to do another .

The insurance company bases their rates on these inspections so the big bosses want good numbers . Plus the schools bird dog this too . Plenty of pressure to get this right . Of The 3 schools , All went home with 100%.

My Nightmares are all in one color .... Yellow

**davischevy** · 03-11-2019, 10:57 PM

100%, that should get you some recognition. Good job.

**davischevy** · 03-11-2019, 11:03 PM

I was going to put this in the "Vintage Picture Thread" but couldn't find it.

My dad sitting on the running board of his 37 Ford in 1946. He drove it to Washington state shortly after this was taken. It had a 60 HP engine. He said he drove as much in second gear as third.

He pulled into a service station when he got to his destination, and the attendant said he liked the car. My dad ended up trading on the spot for a 37 Plymouth.

powerdriver · 03-11-2019, 11:10 PM

In that case here is mine . Dad drove the older one

**special-K** · 03-12-2019, 05:49 AM

I don't think there's a vintage picture thread in General Disco. That's a great picture, Larry. Sitting on the running board, overalls, and all.

Nice pair! No ma'am, not yours. Well... now that I'm lookin', hubba hubba hubba! Oh yeah, those C30s. Nice looking fleet. No ma'am, I said fleet not feet. But now that I'm lookin'...........

**Steeveedee** · 03-12-2019, 05:41 PM

Bears repeating!

**davischevy** · 03-12-2019, 10:55 PM

Tim has been repeating himself a lot lately. I'm beginning to worry about him.

About ten or twelve years after that picture was taken, we lived in Blue Springs. My dad had a residential remodeling business in and around the KC area. He bought a new Chevy truck from Claude Parrish Chevrolet in Liberty, MO.

powerdriver · 03-12-2019, 11:04 PM

To My Surprise ...

**special-K** · 03-12-2019, 11:05 PM

I only hit post reply once, I swear. Damn computer acts funny. It will take me hitting "back" more than 1/2 dozen times to get away from a thread after posting, when I shouldn't have to hit it at all, IIRC. I get the "Thank you for posting. You will now be taken back to your thread message" over and over. I hit the back button several times and see where it goes. Been that way a long time.

Yeah Powerdriver, congratulations. Well deserved. I'd think a gold watch & chain is in order.

Talking about historic tags and restrictions. This evening in town parked right on Main St downtown, which is maybe 2 blocks, I see this goofy red GM X body (Grand Prix/Celebrity?) with huge wing, imitation wheelie bars, a crunched front fender and more money spent in vinyl graphics than on the car... with historic tags. They were all over it. "Ferrari" across both doors on both sides, other stuff squeezed in and some sort of message on the back window about beating the system to some affect. I mean, really??? What a dunce? Then I'm getting mulch at Walmart and here they come cruising around the shopping center with loud exhaust goosing it and acting up. WTF? This was either a visitor to town or the guy just got it on the road. We used to have resident troopers but in less than the last two years we now have our own police force with over zealous rejects who couldn't make a real force with nothing better to do but bother people for running historic tags for uses they wrongly interpret as misuse. What an idiot. He probably got nailed since I saw him. Although, I've only seen him the one time so we are allowed occasional use. But these cops won't see it that way.

**davischevy** · 03-12-2019, 11:06 PM

Congratulations.

Killer Bee · 03-12-2019, 11:20 PM

my night shift mechanics all said great job!

I've gone through several CHP BIT terminal inspections.. ugh!!!

commercial enforcement guy's are usually pretty cool..

some roadside guy's though can be tough! trucker f___ers

CA BIT vehicle inspections for commercial truck are 90 day, busses are 45 day..

**davischevy** · 03-12-2019, 11:53 PM

You need to get back to work now Killer.

**special-K** · 03-13-2019, 06:29 AM

I had another interesting "retail" experience last week on Monday. It was forecast to be freezing temps all week except Monday was going up to 40. I was doing work for a customer prepping his house to listed for sale in a couple weeks. Monday was "the day" to take care of an area of foundation parging that was loose and coming off.

I stop by the nearest Home Depot for a couple bags of Portland cement on my way there. Dump a bag in the mortar pan and it was in clumps from being mishandled... allowed to get wet. No good! I hurry up and stick the bag in the Suburban with the full bag and rush back over to Home Depot to return, grab a cart, and roll it up to customer service. The girl says "We can't accept an empty bag for a return". That I did not need to be hearing, "You sure can", and I explained the content was faulty and in my mortar pan yet to be disposed of. She gets the other gal involved,"Where's the product? You can't just return an empty bag". I was under the gun to get back ASAP to do this work and let the last warmth of the week from that afternoon sunshine be getting on my completed parge job like now. I said, "Look. This ain't no food store and that ain't no empty bag of potato chips. I am a professional contractor and this is a building supply business. Your product is defective, unsellable, and I am losing valuable time to complete the work I am committed to get done today. I need this returned so I can buy something else and get back to do just that!". Eyebrows raised all around, a manager was brought over, and he instructed them on how to go about taking a return. I thanked him and said time was of the essence and shoveling the bad product into the bag was not an option. He said "No. We wouldn't want that in here anyway" and I replied "I wouldn't think so".

Those places take returns for all sorts of stupid reasons including "I changed my mind" from home owners without question. They were telling the wrong guy on the wrong day "No". They are so big and so focused on marketing to everyone and anyone they forget they stepped into the age old slot of supplier of building product to (gnarly

) professional contractors making their livelihoods who buy by the truckload. I avoid them all I can, but can't shoot myself in the foot over my feelings toward them.

**Boog** · 03-13-2019, 10:03 AM

Tim are you ok? Got a finger twitch or something?

GOPAPA · 03-13-2019, 10:31 AM

[QUOTE=special-K;8486044]I had another interesting "retail" experience last week on Monday. It was forecast to be freezing temps all week except Monday was going up to 40. I was doing work for a customer prepping his house to listed for sale in a couple weeks. Monday was "the day" to take care of an area of foundation parging that was loose and coming off.

I stop by the nearest Home Depot for a couple bags of Portland cement on my way there. Dump a bag in the mortar pan and it was in clumps from being mishandled... allowed to get wet. No good! I hurry up and stick the bag in the Suburban with the full bag and rush back over to Home Depot to return, grab a cart, and roll it up to customer service. The girl says "We can't accept an empty bag for a return".

I feel your pain ..on that day when one has no time to spare.. I have been there more than once .. there are other things that go wrong and I bet you have experienced them also..

Order was placed but got lost
Order came in and the window is the wrong size
Order came in and it is broken from delivery
ect ect ect''
Anyway Tim ,,hope all got done that day with out rain and you are relaxing now with a cup of coffee

powerdriver · 03-13-2019, 06:07 PM

Brush and horn collector ring replacement . With the constant turning this is pretty common .

**Ol Blue K20** · 03-15-2019, 07:36 PM

I spent the day at the tire store with my nephew is manager of. By the end of the day "Blue" had new shoes......what ya think?

**special-K** · 03-15-2019, 07:40 PM

I think Cooper is Super! Good tire company. What size?

**Ol Blue K20** · 03-15-2019, 07:50 PM

Quote:

Originally Posted by special-K

I think Cooper is Super! Good tire company. What size?

They're LT295/75R16 on F#*d 16x7 rims

**Steeveedee** · 03-15-2019, 09:22 PM

Bears repeating! Those wheels fit all the major US brands, so I wouldn't call them F#*d wheels. I got one off a '96(?) Suburban from the wrecking yard.

**Ol Blue K20** · 03-15-2019, 09:38 PM

Sorry the site was being goofy...

flashed · 03-15-2019, 10:26 PM

Tires look great . I was going to put tires on my K10 but I killed the motor Sunday .

**davischevy** · 03-15-2019, 11:07 PM

A nice set of wheels and tires and wheels make a rig. That looks great.

I'm starting to worry about you and Tim repeating yourselves.

03-10-2019, 08:12 PM	#1876
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,524	Re: My Facetruck thread. Way back in the early 70s I had a '56 Ford truck and at someone's suggestion i checked into the special tags. The lady dropped a large book in front of me and said here's anything you need to know about what vehicles qualify for special tags. I didn't go very far until I knew i didn't want to go that route. I'm like Tim in that I don't want anybody telling me how I can use my vehicles. I won't get personalized plates either. A man I once worked for had his name on his plates and drove fast most everywhere he went. After being stopped for speeding one day he decided he really didn't need to tell everyone who that speeding car belonged to. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-11-2019, 09:03 PM	#1877
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My Facetruck thread. We have historic as well as street rod tags, yet with historic there is nothing that says it has to be original. I think street rod has nothing to do with age, maybe. In other words, it could be a later model vehicle that was modified to where it isn't street legal by that year's standards... including emissions. I know you have to have a minimum of 18 modifications. I never looked into it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-12-2019 at 05:42 AM.

03-11-2019, 10:49 PM	#1878
powerdriver Registered User Join Date: Mar 2019 Location: Excelsior Springs Missouri Posts: 221	Re: My Facetruck thread. Day to Day stuff huh . Bus mechanic . We have annual D.O.T Inspections . They come in and take over the shop bringing their own jacks and equipment . I just get out of their way . 2 weeks prep time . Had window chips that needed fixed . Some other minor stuff . If you have one corner of one exit decal blown loose its a fail . All Three small bus lots I take care of were there . 47 units total . Tough on the nerves and at 60 years old I don't know if I want to do another . The insurance company bases their rates on these inspections so the big bosses want good numbers . Plus the schools bird dog this too . Plenty of pressure to get this right . Of The 3 schools , All went home with 100%. My Nightmares are all in one color .... Yellow

03-11-2019, 10:57 PM	#1879
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. 100%, that should get you some recognition. Good job. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-11-2019, 11:03 PM	#1880
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. I was going to put this in the "Vintage Picture Thread" but couldn't find it. My dad sitting on the running board of his 37 Ford in 1946. He drove it to Washington state shortly after this was taken. It had a 60 HP engine. He said he drove as much in second gear as third. He pulled into a service station when he got to his destination, and the attendant said he liked the car. My dad ended up trading on the spot for a 37 Plymouth. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-11-2019, 11:10 PM	#1881
powerdriver Registered User Join Date: Mar 2019 Location: Excelsior Springs Missouri Posts: 221	Re: My Facetruck thread. In that case here is mine . Dad drove the older one Attached Images

03-12-2019, 05:49 AM	#1882
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My Facetruck thread. I don't think there's a vintage picture thread in General Disco. That's a great picture, Larry. Sitting on the running board, overalls, and all. Nice pair! No ma'am, not yours. Well... now that I'm lookin', hubba hubba hubba! Oh yeah, those C30s. Nice looking fleet. No ma'am, I said fleet not feet. But now that I'm lookin'........... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-12-2019, 05:41 PM	#1883
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,698	Re: My Facetruck thread. Bears repeating! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

03-12-2019, 10:55 PM	#1884
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. Tim has been repeating himself a lot lately. I'm beginning to worry about him. About ten or twelve years after that picture was taken, we lived in Blue Springs. My dad had a residential remodeling business in and around the KC area. He bought a new Chevy truck from Claude Parrish Chevrolet in Liberty, MO. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-12-2019, 11:04 PM	#1885
powerdriver Registered User Join Date: Mar 2019 Location: Excelsior Springs Missouri Posts: 221	Re: My Facetruck thread. To My Surprise ... Attached Images __________________ I Have My Grand-kids Exactly Where They Want Me

03-12-2019, 11:05 PM	#1886
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My Facetruck thread. I only hit post reply once, I swear. Damn computer acts funny. It will take me hitting "back" more than 1/2 dozen times to get away from a thread after posting, when I shouldn't have to hit it at all, IIRC. I get the "Thank you for posting. You will now be taken back to your thread message" over and over. I hit the back button several times and see where it goes. Been that way a long time. Yeah Powerdriver, congratulations. Well deserved. I'd think a gold watch & chain is in order. Talking about historic tags and restrictions. This evening in town parked right on Main St downtown, which is maybe 2 blocks, I see this goofy red GM X body (Grand Prix/Celebrity?) with huge wing, imitation wheelie bars, a crunched front fender and more money spent in vinyl graphics than on the car... with historic tags. They were all over it. "Ferrari" across both doors on both sides, other stuff squeezed in and some sort of message on the back window about beating the system to some affect. I mean, really??? What a dunce? Then I'm getting mulch at Walmart and here they come cruising around the shopping center with loud exhaust goosing it and acting up. WTF? This was either a visitor to town or the guy just got it on the road. We used to have resident troopers but in less than the last two years we now have our own police force with over zealous rejects who couldn't make a real force with nothing better to do but bother people for running historic tags for uses they wrongly interpret as misuse. What an idiot. He probably got nailed since I saw him. Although, I've only seen him the one time so we are allowed occasional use. But these cops won't see it that way. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-13-2019 at 05:52 AM.

03-12-2019, 11:06 PM	#1887
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. Congratulations. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-12-2019, 11:20 PM	#1888
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,813	Re: My Facetruck thread. my night shift mechanics all said great job! I've gone through several CHP BIT terminal inspections.. ugh!!! commercial enforcement guy's are usually pretty cool.. some roadside guy's though can be tough! trucker f___ers CA BIT vehicle inspections for commercial truck are 90 day, busses are 45 day.. __________________ *I started out with nothing - and I still have most of it*

03-12-2019, 11:53 PM	#1889
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. You need to get back to work now Killer. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-13-2019, 06:29 AM	#1890
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My Facetruck thread. I had another interesting "retail" experience last week on Monday. It was forecast to be freezing temps all week except Monday was going up to 40. I was doing work for a customer prepping his house to listed for sale in a couple weeks. Monday was "the day" to take care of an area of foundation parging that was loose and coming off. I stop by the nearest Home Depot for a couple bags of Portland cement on my way there. Dump a bag in the mortar pan and it was in clumps from being mishandled... allowed to get wet. No good! I hurry up and stick the bag in the Suburban with the full bag and rush back over to Home Depot to return, grab a cart, and roll it up to customer service. The girl says "We can't accept an empty bag for a return". That I did not need to be hearing, "You sure can", and I explained the content was faulty and in my mortar pan yet to be disposed of. She gets the other gal involved,"Where's the product? You can't just return an empty bag". I was under the gun to get back ASAP to do this work and let the last warmth of the week from that afternoon sunshine be getting on my completed parge job like now. I said, "Look. This ain't no food store and that ain't no empty bag of potato chips. I am a professional contractor and this is a building supply business. Your product is defective, unsellable, and I am losing valuable time to complete the work I am committed to get done today. I need this returned so I can buy something else and get back to do just that!". Eyebrows raised all around, a manager was brought over, and he instructed them on how to go about taking a return. I thanked him and said time was of the essence and shoveling the bad product into the bag was not an option. He said "No. We wouldn't want that in here anyway" and I replied "I wouldn't think so". Those places take returns for all sorts of stupid reasons including "I changed my mind" from home owners without question. They were telling the wrong guy on the wrong day "No". They are so big and so focused on marketing to everyone and anyone they forget they stepped into the age old slot of supplier of building product to (gnarly ) professional contractors making their livelihoods who buy by the truckload. I avoid them all I can, but can't shoot myself in the foot over my feelings toward them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-13-2019 at 06:43 AM.



Register or Log In To remove these advertisements.

03-13-2019, 10:03 AM	#1891
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,524	Re: My Facetruck thread. Tim are you ok? Got a finger twitch or something? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-13-2019, 10:31 AM	#1892
GOPAPA Registered User Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,554	Re: My Facetruck thread. [QUOTE=special-K;8486044]I had another interesting "retail" experience last week on Monday. It was forecast to be freezing temps all week except Monday was going up to 40. I was doing work for a customer prepping his house to listed for sale in a couple weeks. Monday was "the day" to take care of an area of foundation parging that was loose and coming off. I stop by the nearest Home Depot for a couple bags of Portland cement on my way there. Dump a bag in the mortar pan and it was in clumps from being mishandled... allowed to get wet. No good! I hurry up and stick the bag in the Suburban with the full bag and rush back over to Home Depot to return, grab a cart, and roll it up to customer service. The girl says "We can't accept an empty bag for a return". I feel your pain ..on that day when one has no time to spare.. I have been there more than once .. there are other things that go wrong and I bet you have experienced them also.. Order was placed but got lost Order came in and the window is the wrong size Order came in and it is broken from delivery ect ect ect'' Anyway Tim ,,hope all got done that day with out rain and you are relaxing now with a cup of coffee __________________ When you learn a thing a day you store up smart.

03-13-2019, 06:07 PM	#1893
powerdriver Registered User Join Date: Mar 2019 Location: Excelsior Springs Missouri Posts: 221	Re: My Facetruck thread. Brush and horn collector ring replacement . With the constant turning this is pretty common . Attached Images __________________ I Have My Grand-kids Exactly Where They Want Me

03-15-2019, 07:36 PM	#1894
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: My Facetruck thread. I spent the day at the tire store with my nephew is manager of. By the end of the day "Blue" had new shoes......what ya think? Attached Images __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul Last edited by Ol Blue K20; 03-15-2019 at 07:39 PM. Reason: correction

03-15-2019, 07:40 PM	#1895
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My Facetruck thread. I think Cooper is Super! Good tire company. What size? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-15-2019, 09:22 PM	#1897
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,698	Re: My Facetruck thread. Bears repeating! Those wheels fit all the major US brands, so I wouldn't call them F#*d wheels. I got one off a '96(?) Suburban from the wrecking yard. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

03-15-2019, 09:38 PM	#1898
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: My Facetruck thread. Sorry the site was being goofy... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-15-2019, 10:26 PM	#1899
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: My Facetruck thread. Tires look great . I was going to put tires on my K10 but I killed the motor Sunday .

03-15-2019, 11:07 PM	#1900
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: My Facetruck thread. A nice set of wheels and tires and wheels make a rig. That looks great. I'm starting to worry about you and Tim repeating yourselves. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.