Here we go!!! - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 02-27-2013, 06:25 PM

Quote:

Originally Posted by RRC

Talked to KEG media today....Rendering of my own coming soon!!!
Posted via Mobile Device

Can't wait to see it

RRC · 03-02-2013, 07:06 PM

Posted via Mobile Device Today I got a good start on the firewall

Posted via Mobile Device
Posted via Mobile Device

RRC · 03-02-2013, 07:06 PM

Posted via Mobile Device Before.......
Posted via Mobile Device

RRC · 03-02-2013, 07:38 PM

Posted via Mobile Device Here is a little love for the boys at Porterbuilt !!!
Posted via Mobile Device

Zoomin · 03-02-2013, 10:26 PM

Just picked up those pieces myself a few weeks ago. Sure cleans the firewall up nice.

shawno72 · 03-03-2013, 08:51 AM

Very nice
Posted via Mobile Device

smartass12 · 03-03-2013, 09:48 AM

Sweet build! that truck looks familiar

Quote:

Originally Posted by RRC

Thanks......they are stock manifolds with the heat shields removed and some cutting and grinning done. I have ordered some Pacesetter headers like these ones .
Posted via Mobile Device. This is a pic from Papas 67 step side thread.
Posted via Mobile Device

*Maximuz* · 03-03-2013, 11:08 AM

Great built!... I'll be watching..

RRC · 03-03-2013, 11:23 AM

Quote:

Originally Posted by shawno72

Very nice
Posted via Mobile Device

Thanks Shawn
Posted via Mobile Device

RRC · 03-03-2013, 11:24 AM

Quote:

Originally Posted by smartass12

Sweet build! that truck looks familiar

It should

Your build looks sweet as well

Posted via Mobile Device

RRC · 03-03-2013, 11:25 AM

Quote:

Originally Posted by Maximuz

Great built!... I'll be watching..

Thanks!
Posted via Mobile Device

Slammed66 · 03-03-2013, 12:42 PM

I see cab mounts, rad support mounts being bolted on.

Hmmmmmmmm. *. Subliminal message. Porterbuilt bolt on body drop *
Posted via Mobile Device

RRC · 03-03-2013, 02:38 PM

Quote:

Originally Posted by Slammed66

I see cab mounts, rad support mounts being bolted on.

Hmmmmmmmm. *. Subliminal message. Porterbuilt bolt on body drop *
Posted via Mobile Device

Could be

Posted via Mobile Device

RRC · 03-03-2013, 03:29 PM

I changed the drivers side because this cab is 71 and had the foot e brake. You can see the hand brake installed in this pic.
Posted via Mobile Device

RRC · 03-03-2013, 09:26 PM

A couple progress pics.
Posted via Mobile Device

RRC · 03-03-2013, 09:28 PM

Really wish I could post more than one pic from this I pad

Posted via Mobile Device

jwalk · 03-03-2013, 09:50 PM

Everything is looking great, especially the engine! Did you just weld some alluminum tubing on the valley cover and press in the factory oil fill tube? Name: image.jpg
Views: 1943
Size: 105.6 KB

Name: image.jpg
Views: 1943
Size: 105.6 KB

Posted via Mobile Device

RRC · 03-03-2013, 10:04 PM

That is correct,I had the machine shop machine the hole in the aluminum tube , then welded it to the plate I had made, then hammered a factory tube into it. Hope this makes sense?
Posted via Mobile Device

RRC · 03-03-2013, 10:10 PM

I had already painted the valley plate before I came up with the idea for the oil tube

Posted via Mobile Device
Posted via Mobile Device

RRC · 03-03-2013, 10:15 PM

Here is the mock up.....made the piece out of wood first,but I couldn't weld it

Next time I would like it to look more like this but oh well next time

Posted via Mobile Device

jwalk · 03-03-2013, 10:37 PM

Yeah that looks great! That's a really cool idea on these LS engines to give them more of a vintage touch! Well done sir!
Posted via Mobile Device

RRC · 03-03-2013, 10:40 PM

Quote:

Originally Posted by jwalk

Yeah that looks great! That's a really cool idea on these LS engines to give them more of a vintage touch! Well done sir!
Posted via Mobile Device

Thanks Justin
Posted via Mobile Device

Gmcfolife · 03-03-2013, 11:35 PM

Quote:

Originally Posted by RRC

Posted via Mobile Device. Got my new upholstery a few months ago! Still need to order the white leather though.
Posted via Mobile Device

I love the colors. What color is that paint sample?
Posted via Mobile Device

RRC · 03-04-2013, 10:41 AM

Quote:

Originally Posted by Gmcfolife

I love the colors. What color is that paint sample?
Posted via Mobile Device

it's the factory color , light blue 507

RRC · 03-11-2013, 02:14 PM

Brian at KEG Media got my rendering done

they did a great job!!! Thanks Brian!!!
Posted via Mobile Device
Posted via Mobile Device

03-02-2013, 07:06 PM	#177
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Posted via Mobile Device Today I got a good start on the firewall Posted via Mobile Device Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-02-2013, 07:06 PM	#178
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Posted via Mobile Device Before....... Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-02-2013, 07:38 PM	#179
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Posted via Mobile Device Here is a little love for the boys at Porterbuilt !!! Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-02-2013, 10:26 PM	#180
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Here we go!!! Just picked up those pieces myself a few weeks ago. Sure cleans the firewall up nice. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-03-2013, 08:51 AM	#181
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Here we go!!! Very nice Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-03-2013, 11:08 AM	#183
Maximuz Account Suspended Join Date: Jan 2013 Location: California Posts: 132	Re: Here we go!!! Great built!... I'll be watching..

03-03-2013, 12:42 PM	#187
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: Here we go!!! I see cab mounts, rad support mounts being bolted on. Hmmmmmmmm. . Subliminal message. Porterbuilt bolt on body drop Posted via Mobile Device __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

03-03-2013, 03:29 PM	#189
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! I changed the drivers side because this cab is 71 and had the foot e brake. You can see the hand brake installed in this pic. Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 09:26 PM	#190
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! A couple progress pics. Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 09:28 PM	#191
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Really wish I could post more than one pic from this I pad Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 09:50 PM	#192
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Here we go!!! Everything is looking great, especially the engine! Did you just weld some alluminum tubing on the valley cover and press in the factory oil fill tube? Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

03-03-2013, 10:04 PM	#193
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! That is correct,I had the machine shop machine the hole in the aluminum tube , then welded it to the plate I had made, then hammered a factory tube into it. Hope this makes sense? Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 10:10 PM	#194
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! I had already painted the valley plate before I came up with the idea for the oil tube Posted via Mobile Device Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 10:15 PM	#195
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Here is the mock up.....made the piece out of wood first,but I couldn't weld it Next time I would like it to look more like this but oh well next time Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

03-03-2013, 10:37 PM	#196
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Here we go!!! Yeah that looks great! That's a really cool idea on these LS engines to give them more of a vintage touch! Well done sir! Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949



Register or Log In To remove these advertisements.

03-11-2013, 02:14 PM	#200
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Brian at KEG Media got my rendering done they did a great job!!! Thanks Brian!!! Posted via Mobile Device Posted via Mobile Device Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.