Project Vitamin C-10 - Page 85 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tiggamonsta · 12-05-2009, 08:02 PM

I was looking for another clue, on what you bought?

Alan's Classic · 12-05-2009, 08:20 PM

They have a total weight of over 500lbs. and comes in 6 pieces.

4dranch · 12-05-2009, 08:46 PM

New paint booth?????

jgh64pkup · 12-05-2009, 09:12 PM

a sandblaster
a BIG sandblaster

taclem · 12-05-2009, 09:29 PM

Alan, I finally finished your book, now I want to wait for the movie. What a build, looking forward to seeing it at one of the Sema Shows, it looks like that quality. Some very ingenious solutions to problems a lot of us face. Thanks for documenting all that you have done.

Alan's Classic · 12-05-2009, 10:49 PM

Quote:

Originally Posted by 4dranch

New paint booth?????

I wish.

Quote:

Originally Posted by jgh64pkup

a sandblaster
a BIG sandblaster

No, something better, I think.

Quote:

Originally Posted by taclem

Alan, I finally finished your book, now I want to wait for the movie. What a build, looking forward to seeing it at one of the Sema Shows, it looks like that quality. Some very ingenious solutions to problems a lot of us face. Thanks for documenting all that you have done.

Thanks for lookin'. It's been a long journey. I might be half way done. I went back to the beginning and edited my first post. Thanks for the great comments.

I was going to wait til I get the things to show ya'll, but I don't want to waste a page of guessing.

Here they are:

30" Length
20 Gauge Capacity
6 Finger Brake
Adjustable Back Gauge
1.25" Roll with Quick Release Top Roll
Adjustable Blade Gap
Spring Loaded Sheet Hold Down
Heavy Cast Iron Frame

Shrinker/stretcher
Ideal for Creating Repair Panels for Wheel Openings, Windshield Frames, ect.
Produce Curves as Tight as 3" Radius
Cast Iron Frame
Works Mild Steel up to 18 Gauge and Aluminum up to 16 Gauge
Drilled Bottom for Bench Mounting or Clamp in Vise
Includes 2 Jaw Sets
Change Jaw in Seconds
Weight 15 lbs

This is it mounted on a stand.

Make Smooth Kink Free Bends Easy
Rugged Cast Iron Construction
Threaded Adjustments
Extension Handle
Mount to a Bench Top or Clamp in a Vise
Kit Includes Storage Case, Cast Iron Base, Handle, Cast Iron Dies, 3/8", 1/2", 5/8", 9/16", 3/4", 7/8" for rounds and 3/4 and1" for Square Tube

ruffrida2005 · 12-05-2009, 10:55 PM

nice Alan. I wonder how good the pipe bender is. I've been looking at them..

you droped some cash.

jgh64pkup · 12-05-2009, 11:12 PM

awesome Alan

bubba327 · 12-06-2009, 12:54 AM

Wow!! You may have LOTS more friends dropping by after work!
Looks like a great business expense.

4dranch · 12-06-2009, 12:17 PM

Very cool Alan, Congrats

**scotts62** · 12-06-2009, 12:21 PM

That is awesome man! I would love to have a couple of those, i want an english wheel one of these days too

tiggamonsta · 12-06-2009, 08:25 PM

Looks like somebody is going to be setup to open a nice shop from home.

awbrown · 12-06-2009, 10:22 PM

85 pages of posts and I have to go to bed , thought i would jump to the last page and see it all done ............ Now i have to get some sleep because I am in the middle of a stovebolt 6 build for my dads 47 chevy coupe , that I have to have built and dynoed by the 2oth of this month .. it is prehaps the most tricked out 6 i have ever worked on and if I dont deliver it by Christmas I may not get back to deliver it to the northeast til the spring ... I have been inspired by this thread to start on my 63 short bed , and i think after the first of the year i will learn how to post pictures and get it pulled out of the back garage and into the heated shop ........keep the pictures coming ..

Alan's Classic · 12-07-2009, 11:12 PM

Quote:

Originally Posted by ruffrida2005

nice Alan. I wonder how good the pipe bender is. I've been looking at them..

you droped some cash.

I'll post my critique once I use it.

Quote:

Originally Posted by jgh64pkup

awesome Alan

Quote:

Originally Posted by bubba327

Wow!! You may have LOTS more friends dropping by after work!
Looks like a great business expense.

I hope it pays for itself.

Quote:

Originally Posted by 4dranch

Very cool Alan, Congrats

Quote:

Originally Posted by scotts62

That is awesome man! I would love to have a couple of those, i want an english wheel one of these days too

I'll see what kind of results these produce. Because I don't have much experience with this stuff. Practice, Practice, Practice. Too bad I can't burn my scraps like I can with wood.

An english wheel will be the next purchase, or maybe a tig.

Quote:

Originally Posted by tiggamonsta

Looks like somebody is going to be setup to open a nice shop from home.

Working on it.

Quote:

Originally Posted by awbrown

85 pages of posts and I have to go to bed , thought i would jump to the last page and see it all done ............ Now i have to get some sleep because I am in the middle of a stovebolt 6 build for my dads 47 chevy coupe , that I have to have built and dynoed by the 2oth of this month .. it is prehaps the most tricked out 6 i have ever worked on and if I dont deliver it by Christmas I may not get back to deliver it to the northeast til the spring ... I have been inspired by this thread to start on my 63 short bed , and i think after the first of the year i will learn how to post pictures and get it pulled out of the back garage and into the heated shop ........keep the pictures coming ..

Good luck on the stovebolt. Thanks for lookin'. Maybe by post 4000 I'll be done.

The shipment arrived today, but didn't have any time to get things put together. Need to get some metal to play with also.

I'm also looking for a 37* double flare tool kit. I can only find a single flare kit. Is that the only way you can do a 37* flare(single)?

jgh64pkup · 12-07-2009, 11:19 PM

Quote:

Originally Posted by Alan's Classic

Maybe by post 4000 I'll be done.

no i dont think you will

**TR65** · 12-07-2009, 11:19 PM

Hey Alan,

I think the AN and JIC 37 degree is only single flare.

Thanks for keepin this great thread going.

TR

**scotts62** · 12-07-2009, 11:23 PM

Quote:

Originally Posted by Alan's Classic

I'll see what kind of results these produce. Because I don't have much experience with this stuff. Practice, Practice, Practice. Too bad I can't burn my scraps like I can with wood.

An english wheel will be the next purchase, or maybe a tig.

If i had a Tig, tubing bender and a bigger shop i think id be dangerous

Alan's Classic · 12-08-2009, 12:29 AM

Quote:

Originally Posted by jgh64pkup

no i dont think you will

Maybe I need to double my estimate to 8000 post.

Quote:

Originally Posted by TR65

Hey Alan,

I think the AN and JIC 37 degree is only single flare.

Thanks for keepin this great thread going.

TR

Thanks for confirming that. I figured since there isn't a tool for the 37* double flare, that it doesn't exist.

Quote:

Originally Posted by scotts62

If i had a Tig, tubing bender and a bigger shop i think id be dangerous

I guess I'm doing it all wrong. I started out being dangerous.

jgh64pkup · 12-08-2009, 12:35 AM

Quote:

Originally Posted by Alan's Classic

Maybe I need to double my estimate to 8000 post.

nah youll be done by done by 3000 maybe

aggie91 · 12-08-2009, 01:23 PM

Nice equipment Alan, I have wanted to get some of the same ones for a while, but I will build my shop first. The garage would get to small if I added the equipment now...

Anyway, how is the bed coming along?

Alan's Classic · 12-08-2009, 10:48 PM

Quote:

Originally Posted by jgh64pkup

nah youll be done by done by 3000 maybe

Quote:

Originally Posted by aggie91

Nice equipment Alan, I have wanted to get some of the same ones for a while, but I will build my shop first. The garage would get to small if I added the equipment now...

Anyway, how is the bed coming along?

Thanks and I agree about shop space. That's why I went with a smaller unit like the 3-1 piece. Most patches should be under 30". The bed is piled up against the wall for now. With Christmas coming and wet firewood (not seasoned) not much is getting done in the shop. Plus were picking up at work so I'll be working more which is a good thing. We'll see how long it last. You know me I'll post some pics of progress once some gets made. I was able to get the new equipment assymbled today and played with it for a few minutes. It's still at work, but it's been raining all day so I couldn't bring it home. The 3-1 isn't something you can pick up by your self unless you have a hoist. It weighs about 350#'s.

Strodder · 12-08-2009, 11:39 PM

Awesome stuff you bought Allan. I'm jealous. Enjoy.

Alan's Classic · 12-08-2009, 11:49 PM

Quote:

Originally Posted by Strodder

Awesome stuff you bought Allan. I'm jealous. Enjoy.

but, you have a lift.

daverod · 12-08-2009, 11:50 PM

Where did you buy the stuff Allen? I was just looking at the add for HF and was thinking I need some stuff so I can be more like Allen. Good to hear work is picking up. I like your Day job thread.

Strodder · 12-09-2009, 12:08 AM

Quote:

Originally Posted by Alan's Classic

but, you have a lift.

I guess I can use the lift to bend metal too.

12-05-2009, 08:02 PM	#2101
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Project Vitamin C-10 I was looking for another clue, on what you bought?

12-05-2009, 08:20 PM	#2102
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Project Vitamin C-10 They have a total weight of over 500lbs. and comes in 6 pieces. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-05-2009, 08:46 PM	#2103
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 New paint booth????? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

12-05-2009, 09:12 PM	#2104
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 a sandblaster a BIG sandblaster __________________ Gage 1967 C10 Shortbed Stepside

12-05-2009, 09:29 PM	#2105
taclem Registered User Join Date: Aug 2009 Location: Preston, ID Posts: 123	Re: Project Vitamin C-10 Alan, I finally finished your book, now I want to wait for the movie. What a build, looking forward to seeing it at one of the Sema Shows, it looks like that quality. Some very ingenious solutions to problems a lot of us face. Thanks for documenting all that you have done.

12-05-2009, 10:55 PM	#2107
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 nice Alan. I wonder how good the pipe bender is. I've been looking at them.. you droped some cash. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-05-2009, 11:12 PM	#2108
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 awesome Alan __________________ Gage 1967 C10 Shortbed Stepside

12-06-2009, 12:54 AM	#2109
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Project Vitamin C-10 Wow!! You may have LOTS more friends dropping by after work! Looks like a great business expense. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

12-06-2009, 12:17 PM	#2110
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 Very cool Alan, Congrats __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

12-06-2009, 12:21 PM	#2111
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Project Vitamin C-10 That is awesome man! I would love to have a couple of those, i want an english wheel one of these days too __________________ Scott 93 crew cab build Project 62

12-06-2009, 08:25 PM	#2112
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Project Vitamin C-10 Looks like somebody is going to be setup to open a nice shop from home.

12-06-2009, 10:22 PM	#2113
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Project Vitamin C-10 85 pages of posts and I have to go to bed , thought i would jump to the last page and see it all done ............ Now i have to get some sleep because I am in the middle of a stovebolt 6 build for my dads 47 chevy coupe , that I have to have built and dynoed by the 2oth of this month .. it is prehaps the most tricked out 6 i have ever worked on and if I dont deliver it by Christmas I may not get back to deliver it to the northeast til the spring ... I have been inspired by this thread to start on my 63 short bed , and i think after the first of the year i will learn how to post pictures and get it pulled out of the back garage and into the heated shop ........keep the pictures coming ..

12-07-2009, 11:19 PM	#2116
TR65 Senior Member Join Date: Nov 2007 Location: Greenville, SC Posts: 873	Re: Project Vitamin C-10 Hey Alan, I think the AN and JIC 37 degree is only single flare. Thanks for keepin this great thread going. TR __________________ 1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880

12-08-2009, 01:23 PM	#2120
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Vitamin C-10 Nice equipment Alan, I have wanted to get some of the same ones for a while, but I will build my shop first. The garage would get to small if I added the equipment now... Anyway, how is the bed coming along? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-08-2009, 11:39 PM	#2122
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Awesome stuff you bought Allan. I'm jealous. Enjoy. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

12-08-2009, 11:50 PM	#2124
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project Vitamin C-10 Where did you buy the stuff Allen? I was just looking at the add for HF and was thinking I need some stuff so I can be more like Allen. Good to hear work is picking up. I like your Day job thread. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 12-08-2009 at 11:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.