Post Pics of your Static Drops!!

[bigdlb12]

1978 nova/apollo/omega/ventura front clip, Stock

1969 Firebird rearend , shorten coil springs about 2 inches

Not too low, still able to drive it, but low enough that the other day I pulled into a parking space and hit a walmart water bottle that was standing up right 16.9oz

Also next to a stock Ford Ranger, my hood and finders are still lower than it

[1Bad62Pro/Street]

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=82

[Bobby61]

Bobby's 65 Fleetside - Early Classics 4" rear and 2" front - All shock relocate and springs. Rear Wheel 295/45/20 x 10 and Front 275/45/20 x 8.5 Work in progress. Thanks to all friends with suggestions to get this started! Dino,Joe and long time freind Mr. Torrez

[Narxoleptic Customs]

Biglb12 - what is that front bumper from?
Posted via Mobile Device

[glos55]

Originally Posted by 65Gregg

Here is how mine sits, I'm satisfied for now, but that could change any minute.

Same here...

[glos55]

Originally Posted by NCD1966

cut 1.5 coils up front off of stock spring; rear has 1998 jeep grand cherokee rear coils with 1 coil cut and 1-5/8" lowering blocks (they were 2" blocks)
rides smooth and handles great for a cheap drop

You can't cut the Jeep springs because of the tapered ends?

[Bobby61]

Originally Posted by Narxoleptic Customs

Biglb12 - what is that front bumper from?
Posted via Mobile Device

The bumper is a stock 60-66 bumper. It actually has changed in the fact that I added Chrome Bumper Guards. I know that doesn't sound good but the factory bumper guards look the old Caddy bumper guards. I'll post an updated pic.

[Bobby61]

Here is the updated pics of the Bumper Guards added to the stock bumper. I can't tell you how tough these were to get wrap around these bumpers. Save yourself time and loosen all Bumper Bolts. Each has two mounting points and you will have to tighten each slightly at a time until top and bottom come tight to the bumper. If you want this look. Little old school look and it's starting to grow on me!

[victorallen]

4.5" front / 5" rear. I used 2" springs and 2.5" drop spindles in front and 4" springs along with 1" blocks in rear. Wheels are 18"x8"s and 20"x10"s.



Sorry for the poor picture quality, I took it with my phone on a day it was trying to rain. We had just thrashed on the truck 17 straight hours to finish it after starting it five years ago.

[tazattitude]

Sharp looking trucks on this thread!!!!

[66 C10 383]

victorallen - that is a d@$# good looking truck !!! What are your tire sizes?

[ambros]

Bobby what is the backspacing on your wheels I really like your truck and the stance

[Tx Firefighter]

4.5 front (2.5 spindles plus 2" springs)
6 in the back (Early Classic springs, super track bar, shock relocators)


Posted via Mobile Device

[jaredbaker919]

Here is mine. All original 66. ece 7" drop in rear. Cut springs with modded stock a arms in front (maybe 6").
[IMG][/IMG]
[IMG][/IMG]

[Fastest32]

Originally Posted by jaredbaker919

Here is mine. All original 66. ece 7" drop in rear. Cut springs with modded stock a arms in front (maybe 6").
[IMG][/IMG]
[IMG][/IMG]

Perfect man! That's about what I'm doing with mine. What exactly did you do? Tire size? Notch the rear?
Posted via Mobile Device

[jaredbaker919]

No notch in rear yet. Have about 1-2" of travel left. 2 or 3" springs up front that I cut 2 coils off of. cut the bump stop off of the lower a arm. tires are 205/70/15 on stock steelies.

[C10Rat]

Here's mine cut front springs with jeep tj springs and 2 inch block and c notched.
Posted via Mobile Device
Posted via Mobile Device

[C/10 King]

4.5/5

[boucher racing]

1.5 coils cut in front
TJ Jeep springs and 2" blocks in rear

[boucher racing]

1.75 coils cut in front
5 leafs removed with 2" drop shackles in rear

[1rudestude]

here is my 400 h.p. p.o.s

[hopped up]

im not sure if ive posted my truck on here yet. cut front coils with 2 coils and a 1 1/2 in lowering block i made. i put a cpp bolt in notch because i do carry alot in the bed .
[IMG][/IMG]
def need to go lower but first im gonna rebuild the front end. worn out frontend components
Posted via Mobile Device

[WCHLVR]

Originally Posted by hopped up

Always wondered what my truck would look like with black steelies, poverty caps, and belflowers. Now I know! LOL

[hopped up]

Originally Posted by WCHLVR

Always wondered what my truck would look like with black steelies, poverty caps, and belflowers. Now I know! LOL

lol! and i wondered what it would look like with full wheel covers. i like it
Posted via Mobile Device

[Ospguy]

Z'd front and rear suspension plus a 3 " spring drop on rear. Lot's of work but full suspension travel and drives like a new truck.......