09-22-2016, 10:39 PM | #201 | |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Quote:
I'm happy with the way it came out and it was not that difficult to do. But in the fender would have definitely looked awesome. |
|
09-22-2016, 11:06 PM | #202 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I got the driver side bed side and fuel door sanded and in epoxy primer.
I received my Gel coat and PVA, so I decided to get the wheel tub mold cast today. This didn't come out too bad. I have a few other things going on before I try to cast one of the tubs. |
09-23-2016, 09:06 PM | #203 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Another full day of body work. I opened a couple of windows in the rear cross support, where I could access the top of the license plate recess. I added a filler piece below the tail gate to get rid of the ugly gap. I also welded out the edges of the roll pan. Just a little more sanding and I can get this primed.
|
09-24-2016, 07:31 AM | #204 |
Senior Member
Join Date: Jan 2015
Location: pembroke pines, fl
Posts: 707
|
Re: Harold's '48 S10 LS1 Build
Its been a while since i checked in..doin some great work...looks like i need to check in more often. Keep the mods comin.
|
09-24-2016, 10:35 PM | #205 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I at least got all of the rear sheet metal primed, except the driver side fender. Now it can rain all it wants. I got a lot done, but I cut the gap a bit close on the rear roll pan. I will go back and fix this later. It looks a lot better without the huge gap that was there before.
|
09-25-2016, 03:52 AM | #206 |
Registered User
Join Date: Mar 2009
Location: Derby Kansas
Posts: 564
|
Re: Harold's '48 S10 LS1 Build
Looks awesome.
__________________
av8tr33337 AKA Bartman Email av8tr33337@yahoo.com Bartman's Ad-S10 Chassis Swap http://67-72chevytrucks.com/vboard/s...d.php?t=415418 My First Youtube Video http://www.youtube.com/watch?v=B6hSt...eature=channel More Pics of the 51 Project http://s668.photobucket.com/albums/v...hassis%20Swap/ 1951 3100 Pickup |
09-25-2016, 11:29 AM | #207 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Harold's '48 S10 LS1 Build
you are moving right along. you keeping track of hours? I know I'd be.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
09-25-2016, 12:25 PM | #208 |
Registered User
Join Date: Feb 2014
Location: Sunnyvale, CA
Posts: 605
|
Re: Harold's '48 S10 LS1 Build
Looking good and nice progress
__________________
1950 3100 5 window |
10-01-2016, 09:53 PM | #209 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I finished welding the tail light housings in the driver side fender and have the All-metal body filler applied and sanded out. I will prime it tomorrow.
I decided to work on the gas filler neck, and the neck housing. This wound up being a pain to fabricate, but for the most part, it is done. The bottom mounting hole is almost in line with the housing side wall. I still need to add a bit of a recess to clear the cap screw. I also need to do a bit more clearance grinding to clear the door hinge. |
10-02-2016, 10:10 PM | #210 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I added the recess and final bolting pad to the gas neck housing. I roughed in the body work and shot it with some epoxy primer. I will do the final touch ups later.
|
10-02-2016, 10:40 PM | #211 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I decided to cast one of the wheel tubs to kill the rest of the day. I made some final touch ups on my wheel tub mold and prepped it with some PVA. One good coat of gel coat and I laid 4 layers of glass. I will pop this out of the mold tomorrow. I want to get both cast, where I can cut the bed sides for the wheel clearance. I also need to install the bed side angle pieces.
|
10-03-2016, 10:42 AM | #212 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Harold's '48 S10 LS1 Build
you should quit your day job!!! nice work
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
10-03-2016, 08:38 PM | #213 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Thanks 99! I appreciate the words of encouragement, but I'd probably starve to death from being too slow. . . LOL
Well for my first molded fiberglass part, it didn't come out too bad. I did wind up with the few small areas on the bottom flange on one side that I need to fix. Other than that, its not too bad for the first attempt. I will try to cast the other one next weekend. |
10-03-2016, 11:29 PM | #214 |
Senior Member
Join Date: Jan 2009
Location: Raleigh, NC
Posts: 444
|
Re: Harold's '48 S10 LS1 Build
Wow. The tubs turned out really nice, Keep it up.
__________________
1949/1954 with LS swap-yeah! http://s260.photobucket.com/albums/i...0/AD%20trucks/jumbled mess of unorganized photos |
10-08-2016, 09:11 PM | #215 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
I received my stainless exhaust pipe and welding wire and started fabricating one of my exhaust tips. The wire welder did okay, but I wish I had my TIG welder working. I don't have a garage where I can set it up. I guess that I need to stop working on the truck and build a garage. . . Or not.
I need to modify the front lower corner of the receiver box. The corner is visible below the running board. I will cut and round the corner to make it less visible. |
10-08-2016, 09:25 PM | #216 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Here are a few shots of the exhaust tips. I have the tips sticking out 1" from the edge of the running boards. I don't think that they will be too much of a shin knocker. Just enough where you can see them good.
|
10-10-2016, 09:25 AM | #217 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Harold's '48 S10 LS1 Build
nice work
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
10-15-2016, 11:14 PM | #218 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Not a whole lot of progress today. I pulled the driver side exhaust tip back off and rounded the front lower corner. I also completed the fabrication on the passenger side exhaust tip, and got it mounted under the running board. I still need to fabricate the exhaust tip inlets.
|
10-15-2016, 11:18 PM | #219 |
Senior Member
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: Harold's '48 S10 LS1 Build
Very nice work on the exhaust tips. I really like how they exit and the theme matches the hood.
|
10-16-2016, 10:21 PM | #220 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Well I've been kicking the can down the road long enough, so I decided this morning to start on the passenger side door. I measured and marked the door and inner door skin and cut them to match. I tacked the inner skin and test fit on the truck. As careful as I was, I still had to re-cut the inner skin to adjust the fit. I had to cut 1/4" out of the front side of the inner door skin. I was able to get the skin re-tacked and re-checked the fit.
|
10-17-2016, 10:08 AM | #221 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Harold's '48 S10 LS1 Build
nice, where is the patch from? I made mine by hand. The corners were the hardest part.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
10-17-2016, 09:15 PM | #222 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
These are Dynacorn re-pops. It is actually not a bad looking piece. It had a couple of areas that I will have to touch up, but it beats me having to try to reproduce the panels. This truck is the only sheet metal experience that I have. I might have attempted to make the repairs now without these panels, but I bought them last year, so I might as well use them.
|
10-22-2016, 10:26 PM | #223 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Here are a few shots of the inner and outer skin replacement. After rolling the side and lower edges, I re-hung the door and checked the fit. I had to cut and bend the window frame out to align with the top of the opening. I have a lot of work yet on correcting the gap around the door.
|
10-23-2016, 11:04 PM | #224 |
Registered User
Join Date: Jul 2015
Location: Shreveport, LA
Posts: 209
|
Re: Harold's '48 S10 LS1 Build
Working on the door gaps today. I shaved the drip rails over the doors, which left me with a large gap over the doors. I added a strip to the top of the door to close the gap up. I still have a little touch up to do with some All-Metal on the inside of the door frame.
The gap on the back side of the door was too close. I had to grind the lip back and weld the edge. I am doing a short section at a time and rough grinding it close. I will apply some All-Metal and do all of the final sanding of the edges when I get all of the edges fixed. |
10-24-2016, 12:47 AM | #225 |
Registered User
Join Date: Aug 2012
Location: West Side of the valley, CA
Posts: 878
|
Re: Harold's '48 S10 LS1 Build
very nice attention to detail. Keep it up.
|
Bookmarks |
Tags |
'48, bearclaw, ls1, s10 |
Thread Tools | |
Display Modes | |
|
|