01-23-2020, 09:24 PM | #2351 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: My Facetruck thread.
Just when I said laying hardwood is in my past. My older son snagged a hardwood floor job and yesterday morning called to see if my younger son and I could help him with it. So that's what I spent the last couple days doing. It was an apartment over a garage, which meant lug the bundles up the stairs. But you know what? I truly enjoyed these last couple days working with my boys. And by being there I landed installing the cabinets and some other trim work. I was a doing some moaning and groaning yesterday. Today was a short day, so not so much
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
01-23-2020, 10:12 PM | #2352 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,524
|
Re: My Facetruck thread.
Aging has that effect on us all Tim. Used to be soreness would show up the 2nd day after I did something more strenuous than normal. Now days, well it shows up a bit sooner than it used to. And it lasts a bit longer than it used to. An old doctor once told me a little pain can be a good thing. It lets us know we are still alive and maybe something needs some attention.
I hope you and your sons work well together. Father/son time together gets to be less and less as time goes by.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
01-23-2020, 11:01 PM | #2353 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
I don't have current pictures. I couldn't get on the tile to take any. These are from Monday night. The light framing, electrical, drywall and tile is in place. The hardwood guy and cultered marble guy will be here the first of the week.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-24-2020, 12:35 AM | #2354 | |
Who Changed This?
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
|
Re: My Facetruck thread.
Quote:
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
|
01-24-2020, 07:29 AM | #2355 | |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: My Facetruck thread.
Quote:
I always operated my crews on a mutual basis, no totem pole. I taught helpers skills and one might be doing skilled work while I humped materials if that was the next thing needed done. The result was a very capable skilled crew that never had one guy waiting on the other. I got a lot more out of my helpers and they stuck around a long time because they felt like a piece of the rock rather than the grunt. I could stay on focus better not having to watch over the help to keep them busy or prevent mistakes.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
01-24-2020, 09:27 AM | #2356 |
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,245
|
Re: My Facetruck thread.
I’ve been working by myself for the last 10 or 12 years. Most of my help didn’t want to do flooring. If I would get a smart guy that caught on fast well, he go out on his own. I worked for a guy for about 2 years when I first started then went on my own. The guy that taught me pretty much retired when I left.
I’ve been doing lots of lvp,wp, laminate and vinyl with a smig of carpet, my next 3 weeks I’m covered up in floating floor work. I bought a D-Cut tile cutter. It was a nice investment. It enables me to make rip cuts on the plank and I can cut 24” carpet tiles with it. I’ve done 600 sf of lvt, 50 yards of carpet tiles and about20 yards of vinyl. I tore out all the existing carpet and tile just this week. Last edited by kingsolver72; 01-24-2020 at 09:34 AM. |
01-24-2020, 10:46 AM | #2357 | |
Proprietor of Dale's Corner
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
|
Re: My Facetruck thread.
Quote:
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul |
|
01-24-2020, 11:44 AM | #2358 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
It is a nice looking job, but he groans a lot.
Most of the floor installers, that have been around here for a while, work as equal partners, because of the "work a while and become your competitor" thing. All of them are around Kingsolvers age. I was talking to a friend of mine that is in his mid seventies and has been in the flooring and appliance business for 50 years. He said he didn't know what was going to happen to flooring installation when these guys retire, because no young people are coming along to take over.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-24-2020, 01:50 PM | #2359 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,524
|
Re: My Facetruck thread.
I have made the same observations in regards to other types of work that today’s youth just don’t want to do. Somebody HAS to do the jobs no one wants to do. That demand could run the rates of those jobs up I imagine.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
01-24-2020, 04:18 PM | #2360 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
Young people have never had such an opportunity. The one's with skills are going to have the upper hand soon.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-24-2020, 10:23 PM | #2361 | |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: My Facetruck thread.
Quote:
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
01-25-2020, 08:43 AM | #2362 |
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,245
|
Re: My Facetruck thread.
The good thing about working alone and if you have the house to yourself is that if you do groan no one hears it. So my question is, did you really groan?
I think its the same as snoring or when a tree falls in the forest. I mentioned in another thread that someone told me that the average age of a carpet installer is 55. Back in the early 90s I was doing some apartment work, on the side in Lawrence Ks. There were a couple of other crews and one of the crews were two females. I never looked at their work. I saw them just the one day, mostly because I was doing my thing. That’s the only time I’ve ever seen that. My brother would call them unicorns. I’ve never heard anyone else that knew female installers. |
01-25-2020, 12:25 PM | #2363 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
My wife and I have been laughing at each other lately. If we sit for more than a few minutes, we start groaning when we get up.
If no one heard it , you didn't groan until you put it on the internet, so now you have it on the WWW, so we know It is true. There is a female here that worked for the fire department and set tile on the side. She is retired from the fire department now, but is still a tile setter. I have no windows in my shop for a couple of reasons. It's harder to break into and easier to heat and cool. I come in here a lot, pull my truck in and lock the doors. Nobody can prove I groan.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-26-2020, 10:07 AM | #2364 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,524
|
Re: My Facetruck thread.
[so now you have it on the WWW, so we know It is true.]
Word!
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
01-27-2020, 09:19 AM | #2365 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: My Facetruck thread.
I stopped snoring as soon as my wife left, but she still complains about it
Like I said, I'm fine when I'm moving. So usually don't moan or groan at work. But I do wince and sigh some I tell you what. I hired a gal back around '89 as a siding cutter. She was the most reliable, loyal, steady help I ever hired. I figured she saw it as an opportunity to make a man's wage in the blue color world and the guys take such jobs for granted... gotta do something. She cut for two experienced hangers and bent up all the trim. She was a little thing, too. Cute as a button. She was on a woman's softball team. I went to a game once. Some looked right dyky (like the one that rode the Harley). Others... if they were that way it was a cryin' shame. I wanted to put together a crew of them. Wouldn't that be a sight, an all women siding crew? Talk about advertisement! I'd be well known and people wouldn't even know my company's name. "Hey John, Do you have the number of that all woman siding company that did your house?" Ring. Ring. "Hello?". "Is this that siding company with an all woman crew?"
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
01-27-2020, 10:09 AM | #2366 |
Old Duffer
Join Date: Mar 2003
Location: Maine
Posts: 1,822
|
Re: My Facetruck thread.
Sounds good Tim, - for ten years ago. Sadly in today's world some women's organization would bust you for exploiting women for your own advancement. Never mind you'd be paying them well, treating them with the upmost respect, and teaching them skills. Now, if you were a woman heading up that crew, you'd be touted as being a wonderful progressive outfit!
Go figure!
__________________
'68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve." |
01-27-2020, 10:55 AM | #2367 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: My Facetruck thread.
I see "A Woman Owned Company" on some company's vehicles and I think, "So what? We're all equal, right? I just need to know if you do a good job, no matter who you are".
I had a thing to say about discrimination, but nah! We're looking at fair weather all week. No storms, about to freezing nights and 45* days. I wish it was hunting season. How's the winter been for the rest of you so far?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-27-2020 at 11:47 AM. |
01-27-2020, 12:38 PM | #2368 |
Who Changed This?
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
|
Re: My Facetruck thread.
It was 80º here last Friday. Clear as a bell.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
01-27-2020, 06:53 PM | #2369 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,524
|
Re: My Facetruck thread.
Eh, not too bad over here. 30s and 50s. Rain about every 3 days. Beats the hard cold I tell ya.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
01-29-2020, 12:55 PM | #2370 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
I forgot to get pics, but the remodel is coming along. The tile is done, the hardwood guys will finish today, the shower and bath guy and painter are scheduled for Monday. The cabinet people will be the hold up. I hope they start building them next week. With any luck we will be done in month.
What got me thinking about this was a mention of cardio in another thread. There are 31 step risers from the basement where we are living, to the upstairs where we sleep. We will be in better shape when this is done. I have learned to plan before I go up to bed or come down in the morning.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-29-2020, 10:34 PM | #2371 |
Senior Member
Join Date: Aug 2013
Location: Ca. <-> Ma.
Posts: 5,746
|
Re: My Facetruck thread.
Top
? Or ? Bottom |
01-29-2020, 10:42 PM | #2373 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: My Facetruck thread.
Yep, spinners. Boy those things are hard to drive in traffic with one outside mirror.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
01-29-2020, 10:48 PM | #2374 |
Senior Member
Join Date: Aug 2013
Location: Ca. <-> Ma.
Posts: 5,746
|
Re: My Facetruck thread.
Yeah
|
01-29-2020, 11:07 PM | #2375 |
Registered User
Join Date: Jan 2016
Location: Barber City, CA
Posts: 4,809
|
Re: My Facetruck thread.
sill question, factory 64 pmd spinners of course..
take good care of it for me
__________________
I started out with nothing - and I still have most of it |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|