1984 C10 w/ '99 Vortec and goodies - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jared stewart · 06-11-2004, 10:17 AM

Well guys, I have to sell something. I bought this truck planning on keeping it and selling the 3/4 ton I have for sale. I haven't sold it yet, so I thought I'd see if there's any interest in this one. Please feel free to contact me with questions or offers. I have to be pretty open on the price 'cause something has to go. I wouldn't be against parting it out, so let me know if something catches your eye.

Engine : vortec 350
This engine was a factory return from a GMC conversion van. It spun a bearing at 7000 miles. It’s been tore down, crank replaced with a nodular eagle crank and taken to the local machine shop and had the rod reconditioned and the bottom end blueprinted and balanced.

Engine Contains:
• clevelite 77 bearings
• Felpro performance head gaskets
• Felpro oil pan gasket (one piece)
• Edelbrock vortec performer intake polished
• Edelbrock 1406 performer carb
• FlowKooler Waterpump
• Spal Electric Fan w/ painless wiring
• 31" Griffin Aluminum Radiator
• Small Body Dave's HEI Conversion Distributor
• Accel Coil
• Hedman HDT caprice Headers
• Lokar dipstick
• K&N filter
•I have a series 50 3" flowmaster and a 3" cat along with a 2 1/2" to 3" Y collector (not installed)
• Holley electric fuel pump/Edelbrock pressure gauge/regulator
In the Cab
• somone's poor job at replacing driver's side floor pan

Chassis/Body
• Sheet metal isn’t perfect, but pretty good overall
• NEW tail light assemblies
• NEW head lights/headlight bezels (not installed)
• Both cab corners have been done
• Drivers side floor needs some attention
• NEW inner Fenders
• Frame has been POR 15 Coated
• new front breaks
• New front shocks (not installed)
• NEW gas tank, fuel pickup unit, and tank straps

700R4 Tranny with about 30,000 on rebuild

$3,200 asking price. Feel free to make offers.
I have other pictures as well.

jared stewart · 06-11-2004, 04:36 PM

I don't have internet access at home so over the weekend I can be reached at:
(573)439-4525 Early mornings or around 9:30 at night. Leave a message w/ your number and preferred call back time if no one is home.

jared stewart · 06-14-2004, 08:40 AM

^^^^^ Top ^^^^^

Smokin72on20s · 06-16-2004, 09:21 PM

lets see some bigger pics

jared stewart · 06-17-2004, 08:02 AM

Here's some pictures, they should be bigger. I can borrow a camera and take more pictures of whatever you want. Just let me know.

jared stewart · 06-17-2004, 08:11 AM

Here's more pics

Smokin72on20s · 06-17-2004, 10:46 PM

do you have some better pics of the body/interior? does it have AC? how many miles since the rebuild? any rust other then the floor pan? no exhaust?

jared stewart · 06-18-2004, 08:09 AM

Quote:

Originally Posted by Smokin72on20s

do you have some better pics of the body/interior? does it have AC? how many miles since the rebuild? any rust other then the floor pan? no exhaust?

Those are all the pictures I have right now. I'll try to get some more this weekend. It doesn't have AC. It has 0 miles on the engine rebuild. It has been run about an hour to set timing, carb, check gauges, etc. I'd have to look it over to make sure, but I don't think there's any rust anwhere. The inner fenders where it's usually the worst are new and so are the cab corners, and the frame's been coated. It has the Hedman headers on it, and I have the exhaust bought, just not installed. If someone buys it right away and wants me too, I'll have it installed for them.

jared stewart · 06-28-2004, 08:11 AM

Take 'er to the top

Smokin72on20s · 07-03-2004, 11:37 PM

its 2wd drive? also is it short or long bed? i wish you were closer..

jared stewart · 07-06-2004, 08:07 AM

Sorry about the long wait. I can only check this at work.

Yes it is 2wd and it's a short bed. I have family that goes to Colorado every Thanksgiving/Christmas and we could probably work something out. Or I would probably be willing to deliver part of the way for a small fee. Where in Colorado are you?

rambler · 07-06-2004, 03:44 PM

Sorry to but in here...I may be interested in it as well, primarly for the frame and drivetrain... but I think I may need a long bed. I will have to measure the body I want to put on it... where is Ewing MO?

jared stewart · 07-06-2004, 04:36 PM

Ewing is in the Northeast corner of the state. About 45 minutes Northwest of Hannibal if you know where that is. Try getting on Mapquest and do driving directions to Nelsonville, MO. It should find it. That's where the truck is.

Tom · 07-06-2004, 06:23 PM

thats a great looking engine bay...wish my vortec looked that good

Smokin72on20s · 07-07-2004, 02:07 AM

Hey, i'm in Denver. i have family out in springfield, and i have driven there many times. Do you have any pics of the body, interior, maybe undercarriage? Do you have all the glass? is it in good shape? what do you think the hp/tq #'s are on the motor? How is the chasis and suspension?

jared stewart · 07-07-2004, 08:08 AM

If the digital camera is here at the end of the day, I'll take it home and snap a bunch of shots. All the glass is in and in good shape. I'm a very poor judge of hp/tq, but it definitely has enough guts to roast the tires and set you back in the seat when you get on it. (a little side note, it also has enough snap to throw an old transmission and two sets of exhaust pipe out of the bed and onto the road when you punch it, guess how I know that

)

Tom · 07-08-2004, 05:21 AM

Quote:

Originally Posted by Smokin72on20s

what do you think the hp/tq #'s are on the motor?

According to DD2000 [and GM's in truck power numbers] its around 300hp and 380lbs/ft for a stock vortec motor at the crank. Also the vortec crate motor at 330hp is the same except for less compression but a slightly larger cam.

jared stewart · 07-08-2004, 08:37 AM

Here's some more pictures. I have several more, if you're interested in seeing them let me know and I'll e-mail them to you.

Smokin72on20s · 07-08-2004, 09:59 PM

yea send them to me a768678@yahoo.com

jared stewart · 07-12-2004, 10:29 AM

Email sent.

jared stewart · 07-14-2004, 08:16 AM

If anybody's interested, make me an offer.

I'll part the truck out also. I'm thinking $1,500 for everything minus the motor (and all relative accessories) and the tranny, or $2,200 with the tranny. Like I said make me an offer, I really need to move this stuff.

DriverDown · 07-14-2004, 11:52 AM

I'm very interested - just need to find a way to move it the 1000 miles to Austin, TX...

jared stewart · 07-14-2004, 12:06 PM

ROADTRIP

DriverDown · 07-14-2004, 01:41 PM

In your opinion, is the truck dependable enough to make the drive - or would it need to be towed...?

jared stewart · 07-14-2004, 01:58 PM

The truck would definitely make the trip. But it's not licensed or inspected.

06-11-2004, 10:17 AM	#1
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	1984 C10 w/ '99 Vortec and goodies Well guys, I have to sell something. I bought this truck planning on keeping it and selling the 3/4 ton I have for sale. I haven't sold it yet, so I thought I'd see if there's any interest in this one. Please feel free to contact me with questions or offers. I have to be pretty open on the price 'cause something has to go. I wouldn't be against parting it out, so let me know if something catches your eye. Engine : vortec 350 This engine was a factory return from a GMC conversion van. It spun a bearing at 7000 miles. It’s been tore down, crank replaced with a nodular eagle crank and taken to the local machine shop and had the rod reconditioned and the bottom end blueprinted and balanced. Engine Contains: • clevelite 77 bearings • Felpro performance head gaskets • Felpro oil pan gasket (one piece) • Edelbrock vortec performer intake polished • Edelbrock 1406 performer carb • FlowKooler Waterpump • Spal Electric Fan w/ painless wiring • 31" Griffin Aluminum Radiator • Small Body Dave's HEI Conversion Distributor • Accel Coil • Hedman HDT caprice Headers • Lokar dipstick • K&N filter •I have a series 50 3" flowmaster and a 3" cat along with a 2 1/2" to 3" Y collector (not installed) • Holley electric fuel pump/Edelbrock pressure gauge/regulator In the Cab • somone's poor job at replacing driver's side floor pan Chassis/Body • Sheet metal isn’t perfect, but pretty good overall • NEW tail light assemblies • NEW head lights/headlight bezels (not installed) • Both cab corners have been done • Drivers side floor needs some attention • NEW inner Fenders • Frame has been POR 15 Coated • new front breaks • New front shocks (not installed) • NEW gas tank, fuel pickup unit, and tank straps 700R4 Tranny with about 30,000 on rebuild $3,200 asking price. Feel free to make offers. I have other pictures as well. Attached Images Last edited by jared stewart; 06-17-2004 at 08:04 AM. Reason: gauges are sunpro, tires shouldn't have been listed

06-16-2004, 09:21 PM	#4
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	lets see some bigger pics __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

06-17-2004, 08:02 AM	#5
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Pictures Here's some pictures, they should be bigger. I can borrow a camera and take more pictures of whatever you want. Just let me know. Attached Images

06-17-2004, 08:11 AM	#6
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Here's more pics Attached Images

06-17-2004, 10:46 PM	#7
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	do you have some better pics of the body/interior? does it have AC? how many miles since the rebuild? any rust other then the floor pan? no exhaust? __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

06-11-2004, 04:36 PM	#2
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	I don't have internet access at home so over the weekend I can be reached at: (573)439-4525 Early mornings or around 9:30 at night. Leave a message w/ your number and preferred call back time if no one is home.

06-14-2004, 08:40 AM	#3
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	^^^^^ Top ^^^^^

06-28-2004, 08:11 AM	#9
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Take 'er to the top

07-03-2004, 11:37 PM	#10
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	its 2wd drive? also is it short or long bed? i wish you were closer.. __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

07-06-2004, 08:07 AM	#11
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Sorry about the long wait. I can only check this at work. Yes it is 2wd and it's a short bed. I have family that goes to Colorado every Thanksgiving/Christmas and we could probably work something out. Or I would probably be willing to deliver part of the way for a small fee. Where in Colorado are you?

07-06-2004, 03:44 PM	#12
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Sorry to but in here...I may be interested in it as well, primarly for the frame and drivetrain... but I think I may need a long bed. I will have to measure the body I want to put on it... where is Ewing MO? __________________ No matter where you are..... There you are... Buckaroo Banzi

07-06-2004, 04:36 PM	#13
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Ewing is in the Northeast corner of the state. About 45 minutes Northwest of Hannibal if you know where that is. Try getting on Mapquest and do driving directions to Nelsonville, MO. It should find it. That's where the truck is.

07-06-2004, 06:23 PM	#14
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	thats a great looking engine bay...wish my vortec looked that good __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

07-07-2004, 02:07 AM	#15
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	Hey, i'm in Denver. i have family out in springfield, and i have driven there many times. Do you have any pics of the body, interior, maybe undercarriage? Do you have all the glass? is it in good shape? what do you think the hp/tq #'s are on the motor? How is the chasis and suspension? __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

07-07-2004, 08:08 AM	#16
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	If the digital camera is here at the end of the day, I'll take it home and snap a bunch of shots. All the glass is in and in good shape. I'm a very poor judge of hp/tq, but it definitely has enough guts to roast the tires and set you back in the seat when you get on it. (a little side note, it also has enough snap to throw an old transmission and two sets of exhaust pipe out of the bed and onto the road when you punch it, guess how I know that )



Register or Log In To remove these advertisements.

07-08-2004, 08:37 AM	#18
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Here's some more pictures. I have several more, if you're interested in seeing them let me know and I'll e-mail them to you. Attached Images

07-08-2004, 09:59 PM	#19
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	yea send them to me a768678@yahoo.com __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

07-12-2004, 10:29 AM	#20
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	Email sent.

07-14-2004, 08:16 AM	#21
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	If anybody's interested, make me an offer. I'll part the truck out also. I'm thinking $1,500 for everything minus the motor (and all relative accessories) and the tranny, or $2,200 with the tranny. Like I said make me an offer, I really need to move this stuff.

07-14-2004, 11:52 AM	#22
DriverDown Junior Member Join Date: Jul 2002 Location: Austin, TX Posts: 69	I'm very interested - just need to find a way to move it the 1000 miles to Austin, TX...

07-14-2004, 12:06 PM	#23
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	ROADTRIP

07-14-2004, 01:41 PM	#24
DriverDown Junior Member Join Date: Jul 2002 Location: Austin, TX Posts: 69	In your opinion, is the truck dependable enough to make the drive - or would it need to be towed...?

07-14-2004, 01:58 PM	#25
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	The truck would definitely make the trip. But it's not licensed or inspected.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.