|
06-14-2004, 12:16 PM
|
#1 |
|
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,853
|
Hood Alignment issues
OK, I now have the hood backon the hinges on the truck. Without the springs on , the hood sits nice and flush, but its kinda heavy to have to lift all the time. So we put the springs back on and the drivers side sits nice but the passenger side sits up about 3/4" or 1" at the rear. I assume that the problem lies with my springs.... or am I missing something here?? Is there any other adjustments that can be done? I have a spare set of hinges off my parts truck that I am gonna try out this week to see if it makes a difference
Any tips?
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
|
|
|
06-14-2004, 01:15 PM
|
#2 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
|
Check out this post.
http://67-72chevytrucks.com/vboard/s...threadid=91319
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
