need wiring help soon.

[ocbaud]

okay, i know a couple of you guys offered to help. so here is your chance.
i'm not adding the remote start because it is to much of a hassle and wont work to well in teh cold with a carb.

i do need to find some wires though.

on the 12-pin main harness for the alarm are the following:

- 500mA output when armed
-/+ parking light output
- activation input
- 200mA domelight output
- Door trigger input zone 3
- trunk input instant trigger
+ door trigger input zone 3
- chassis ground
+ siren output
+ 12v power input
- 200mA channel 2 output


the ones in bold are the ones i need help finding. the parking light output is for when the alarm is going off and the lights flash. the domelight output is for that aswell, and the 2 door trigger input's are for when the doors open, the alarm goes off(i believe they tie into the switch that makes the light come on when the door is open.

[ocbaud]

can anyone help me out?

[cochino12]

I'm goin on memeory here so I may not be correct.

-/+ parking light output - White wire, you can find this by your light switch
200mA domelight output - Orange wire, pull the carpet back drivers seat
- Door trigger input zone 3 - Just pull the pinswitch in door and find the color


500mA output when armed- Dont know what that is? Isnt it for an accessory or relay?

[ocbaud]

Originally Posted by cochino12

I'm goin on memeory here so I may not be correct.

500mA output when armed- Dont know what that is? Isnt it for an accessory or relay?

yes, it leads to a relay with 3 other bare wires connected to that relay. what do i hook it up to?