Has anyone "Z" their frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG_BLAZER86 · 06-27-2004, 08:19 PM

I have a 70 2 wd blazer, and I'm want to Z the frame. Does any one have an pictures of what it looks like, and were they got the info to do it. I would like to get all of the info I can before I start this project.

mkundo · 06-27-2004, 09:59 PM

A

couple month's back there were a dozen photo's showing a how too. Right here.

*chevytruckfan* · 06-28-2004, 01:53 PM

Here is a thread where this topic is discussed in detail and includes photos.

loweredd · 07-07-2004, 06:37 PM

Oh man, see what happens when I dont get on the board for awhile? People start to talk about me. :p That's my truck........ask my any questions you can think of.

BIG_BLAZER86 · 07-07-2004, 08:19 PM

Did you have to do any thing to the trans hump, also what did you do about your A arms ( stock, tubular, ? ) thats all I can think of tell I realy tear into it.

Thanks

loweredd · 07-07-2004, 10:15 PM

I have a bunch of pictures on my site, but I havent tackled the turning issues yet. I have been kicking around the idea of a different offset wheel, machining a tad bit off of the rotors, or shortening the a-arms. I can take off the 3" drop spindle, but I think that the angle on the upper ball joint will be sooooooo extreme at drop, that it will snap right off.

The trans hump had to be raised up also.

loweredd · 07-07-2004, 10:16 PM

before I did the z, I had to raise up the front all the way to turn without rubbing the fender, so I think if I got 2" more lift in the front, it should turn fine, but I dont want to have to lift the front up all the time just to turn.

06-27-2004, 08:19 PM	#1
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Has anyone "Z" their frame I have a 70 2 wd blazer, and I'm want to Z the frame. Does any one have an pictures of what it looks like, and were they got the info to do it. I would like to get all of the info I can before I start this project. __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

07-07-2004, 08:19 PM	#5
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Did you have to do any thing to the trans hump, also what did you do about your A arms ( stock, tubular, ? ) thats all I can think of tell I realy tear into it. Thanks __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-27-2004, 09:59 PM	#2
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	A couple month's back there were a dozen photo's showing a how too. Right here.

06-28-2004, 01:53 PM	#3
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	Here is a thread where this topic is discussed in detail and includes photos.

07-07-2004, 06:37 PM	#4
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	Oh man, see what happens when I dont get on the board for awhile? People start to talk about me. :p That's my truck........ask my any questions you can think of.

07-07-2004, 10:15 PM	#6
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	I have a bunch of pictures on my site, but I havent tackled the turning issues yet. I have been kicking around the idea of a different offset wheel, machining a tad bit off of the rotors, or shortening the a-arms. I can take off the 3" drop spindle, but I think that the angle on the upper ball joint will be sooooooo extreme at drop, that it will snap right off. The trans hump had to be raised up also.

07-07-2004, 10:16 PM	#7
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	before I did the z, I had to raise up the front all the way to turn without rubbing the fender, so I think if I got 2" more lift in the front, it should turn fine, but I dont want to have to lift the front up all the time just to turn.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.