p/s pressure hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheatham · 07-13-2004, 05:37 PM

Could someone check real quick, or do you know... does the pressure hose go to the front or back on the power steeriing?

Thanks.

franko72 · 07-13-2004, 06:04 PM

my hoses are both connected to the back on my p.s. pump . It may be different because its a big block 72

cheatham · 07-13-2004, 06:06 PM

Sorry, I didn't say my question very well. I mean does the p/s pressure hose go in the front or back hole in the p/s gearbox?

Thanks, again

cheatham · 07-13-2004, 06:26 PM

ttt

mikeoj · 07-13-2004, 06:42 PM

Assuming you are talking about the gearbox.You really can't get em mixed up.They are different sizes.Front is pressure,back is return.

franko72 · 07-13-2004, 07:10 PM

front is pressure and rear is return. correct mikeOj ,the old lady jumped on the pc while I went outside to check.

cheatham · 07-13-2004, 07:52 PM

Thanks, guys. I appreciate it. Mikeoj, I guess that is why I needed two different wrenches.

07-13-2004, 05:37 PM	#1
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	p/s pressure hose Could someone check real quick, or do you know... does the pressure hose go to the front or back on the power steeriing? Thanks. __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:04 PM	#2
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	my hoses are both connected to the back on my p.s. pump . It may be different because its a big block 72 __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

07-13-2004, 06:06 PM	#3
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Sorry, I didn't say my question very well. I mean does the p/s pressure hose go in the front or back hole in the p/s gearbox? Thanks, again __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:26 PM	#4
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	ttt __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:42 PM	#5
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Assuming you are talking about the gearbox.You really can't get em mixed up.They are different sizes.Front is pressure,back is return. __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

07-13-2004, 07:10 PM	#6
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	front is pressure and rear is return. correct mikeOj ,the old lady jumped on the pc while I went outside to check. __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

07-13-2004, 07:52 PM	#7
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Thanks, guys. I appreciate it. Mikeoj, I guess that is why I needed two different wrenches. __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.