Conversion of 1965 gmc front suspension to later model - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_Carmichael · 08-21-2004, 03:29 AM

I have a 1965 GMC 1/2 ton pickup. The front end is worn out on it. I would like to change it to something a more modern. Does anyone know what is the most efficient way of doing this. I would like to end up with power steering and disk brakes if possible. perhaps a later model bolt in ??? Thanks in advance for your help !!!!!
Jim C

NO LONGER DISTURBED KONCEPTZ · 08-21-2004, 10:30 PM

Well me and my friedn are have a 66 that we are going to just take the upper and lower a-arms from a 76 Chevy 1/2 ton and just bolt up and I think you only have to change out the outter tie rod end to make it work and you can have 5 lug and disc brakes and all you have to do is set up the power breaks.

08-21-2004, 03:29 AM	#1
Jim_Carmichael Registered User Join Date: Aug 2004 Posts: 1	Conversion of 1965 gmc front suspension to later model I have a 1965 GMC 1/2 ton pickup. The front end is worn out on it. I would like to change it to something a more modern. Does anyone know what is the most efficient way of doing this. I would like to end up with power steering and disk brakes if possible. perhaps a later model bolt in ??? Thanks in advance for your help !!!!! Jim C

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2004, 10:30 PM	#2
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Well me and my friedn are have a 66 that we are going to just take the upper and lower a-arms from a 76 Chevy 1/2 ton and just bolt up and I think you only have to change out the outter tie rod end to make it work and you can have 5 lug and disc brakes and all you have to do is set up the power breaks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.