Parts in SE Wisconsin... Worth the Trip!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*dtlilly* · 09-02-2004, 02:07 PM

John (john@thepier), asked me to post what he has left in Lake Geneva WI (almost in Illinois).

67-72_ 3/4 ton 4X4 frame: The frame has been completely disassembled, sand blasted, epoxy painted, and reassembled with grade 8 bolts. The Dana 60 with 411 posi rear axel goes with the frame. The Dana 60 with 411 front axel, tranny and transfer case, John intends to keep (unless you give him an additional $$$$). The 8" Skyjacker Softride spring lift is also an additional cost. Contact John@thepeir for additional info. and pricing. However I was told $1100 for frame, rear axel and springs. A front 3/4 ton axel is available cheep.

68-72 Fleetside 8' bed with steel floor: This bed is one of the cleanest I've seen in a long time. If I had the extra room right now, I would have bought this bed for myself. The steel floor in it has no rust and no dents!! The bed sides, front panel, and wheel wells are also in great shape. He will sell for $400.

68-72 GMC shortbed 2wd truck. (I can't remember what your he said it was) This has a cab and front clip. It is a short bed with rear leaf springs. A good project truck for someone. John, pipe in here and let everyone know how much for this.

*dtlilly* · 09-02-2004, 02:15 PM

Pics of the GMC, sorry the cab on the back is mine!!

*dtlilly* · 09-02-2004, 02:35 PM

Please contact John about his parts.

Here is a link to his PM. http://67-72chevytrucks.com/vboard/p...=newpm&u=13428

*dtlilly* · 09-03-2004, 10:48 AM

ttt

john@thepier · 09-23-2004, 11:43 PM

ttt

ZOOMY · 09-24-2004, 05:52 AM

.........................

john@thepier · 09-27-2004, 10:37 PM

ttt

ZOOMY · 09-28-2004, 07:32 AM

John, I PM'd you.............Z

benscool1 · 09-28-2004, 09:35 AM

PM sent...

GMC71k20 · 09-28-2004, 11:02 AM

are those the springs i bought? I have bought from John and he gets my approval, good communication and answers all questions thoroughly.

eric69 · 09-28-2004, 10:45 PM

hello can you give me any more info on the 68-72 fleetside bed.

eric69 · 09-28-2004, 10:52 PM

If you want you can send me any info about the 68-72 fleetside bed to my e-mail it is ecj82@yahoo.com I am new at using this message board. I just recently purchased a 69 chevy and I am looking for a better bed than what is on it. So any info you can give will be greatly appreciated, thanks Eric

john@thepier · 09-28-2004, 11:07 PM

Zommy is comming by tomarow a.m. if he passes or dose not show up I will pm you.THE box is as described, solid with just a few soft dents .LOOK at the pics. on post, thats about the best I can do. JOHN

eric69 · 09-28-2004, 11:41 PM

Thanks, if he still has it I might be interested in it. I live in IL so if he still has it I could go on a road trip to WIS some weekend to look at it. Thanks again for helping me out.
Eric

john@thepier · 09-30-2004, 12:10 PM

box dana 60 rear ,and 3/4 ton 4x4 frame still 4 sale .dana 60 is 4-10 with posi.$100. box is solid $300.00 and frame is solid has been blasted and epoxi painted.$300.00

john@thepier · 10-02-2004, 07:05 PM

ttt

eric69 · 10-05-2004, 10:00 PM

Thanks for the information. I dont know if I am going to be able to get the bed right now I have had some other expenses come up that I hadnt planned for on my truck. And right now I dont absolutly need a bed. Sorry I didnt reply sooner. But I have been to busy working to get on and write back. Thanks again for helpimng me out.
Eric

john@thepier · 10-06-2004, 07:01 PM

ttt

*dtlilly* · 10-08-2004, 12:31 PM

ttt for ya

09-02-2004, 02:07 PM	#1
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Parts in SE Wisconsin... Worth the Trip!! John (john@thepier), asked me to post what he has left in Lake Geneva WI (almost in Illinois). 67-72_ 3/4 ton 4X4 frame: The frame has been completely disassembled, sand blasted, epoxy painted, and reassembled with grade 8 bolts. The Dana 60 with 411 posi rear axel goes with the frame. The Dana 60 with 411 front axel, tranny and transfer case, John intends to keep (unless you give him an additional $$$$). The 8" Skyjacker Softride spring lift is also an additional cost. Contact John@thepeir for additional info. and pricing. However I was told $1100 for frame, rear axel and springs. A front 3/4 ton axel is available cheep. 68-72 Fleetside 8' bed with steel floor: This bed is one of the cleanest I've seen in a long time. If I had the extra room right now, I would have bought this bed for myself. The steel floor in it has no rust and no dents!! The bed sides, front panel, and wheel wells are also in great shape. He will sell for $400. 68-72 GMC shortbed 2wd truck. (I can't remember what your he said it was) This has a cab and front clip. It is a short bed with rear leaf springs. A good project truck for someone. John, pipe in here and let everyone know how much for this. Attached Images

09-02-2004, 02:15 PM	#2
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Pics of the GMC, sorry the cab on the back is mine!! Attached Images

09-02-2004, 02:35 PM	#3
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Contact John Please contact John about his parts. Here is a link to his PM. http://67-72chevytrucks.com/vboard/p...=newpm&u=13428

09-24-2004, 05:52 AM	#6
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	ttt .........................

09-28-2004, 07:32 AM	#8
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Pm John, I PM'd you.............Z

09-03-2004, 10:48 AM	#4
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	ttt

09-23-2004, 11:43 PM	#5
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	ttt

09-27-2004, 10:37 PM	#7
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	ttt

09-28-2004, 09:35 AM	#9
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	PM sent... __________________ Ben 84 C10 Silverado 14 Silverado Z71

09-28-2004, 11:02 AM	#10
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	are those the springs i bought? I have bought from John and he gets my approval, good communication and answers all questions thoroughly. Last edited by GMC71k20; 09-28-2004 at 12:07 PM.

09-28-2004, 10:45 PM	#11
eric69 Registered User Join Date: Sep 2004 Location: IL Posts: 7	hello can you give me any more info on the 68-72 fleetside bed.

09-28-2004, 10:52 PM	#12
eric69 Registered User Join Date: Sep 2004 Location: IL Posts: 7	If you want you can send me any info about the 68-72 fleetside bed to my e-mail it is ecj82@yahoo.com I am new at using this message board. I just recently purchased a 69 chevy and I am looking for a better bed than what is on it. So any info you can give will be greatly appreciated, thanks Eric

09-28-2004, 11:07 PM	#13
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	bed Zommy is comming by tomarow a.m. if he passes or dose not show up I will pm you.THE box is as described, solid with just a few soft dents .LOOK at the pics. on post, thats about the best I can do. JOHN

09-28-2004, 11:41 PM	#14
eric69 Registered User Join Date: Sep 2004 Location: IL Posts: 7	Thanks, if he still has it I might be interested in it. I live in IL so if he still has it I could go on a road trip to WIS some weekend to look at it. Thanks again for helping me out. Eric

09-30-2004, 12:10 PM	#15
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	box dana 60 rear ,and 3/4 ton 4x4 frame still 4 sale .dana 60 is 4-10 with posi.$100. box is solid $300.00 and frame is solid has been blasted and epoxi painted.$300.00



Register or Log In To remove these advertisements.

10-02-2004, 07:05 PM	#16
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	ttt

10-05-2004, 10:00 PM	#17
eric69 Registered User Join Date: Sep 2004 Location: IL Posts: 7	Thanks for the information. I dont know if I am going to be able to get the bed right now I have had some other expenses come up that I hadnt planned for on my truck. And right now I dont absolutly need a bed. Sorry I didnt reply sooner. But I have been to busy working to get on and write back. Thanks again for helpimng me out. Eric

10-06-2004, 07:01 PM	#18
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	ttt

10-08-2004, 12:31 PM	#19
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	ttt for ya

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.