Newbie here! Need the bolt pattern for a 96 gmc sierra! THanks for any help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

96gmcsierra · 09-06-2004, 12:57 AM

Hey guys,

Just traded in my 92 camaro for a 1996 gmc sierra with 72k miles. I just wanted to know if anyone had the bolt pattern for truck. Any help would be appreciated.

Thanks,
96gmcsierra

Tx Firefighter · 09-06-2004, 06:33 AM

1/2 ton 2 wheel drive is 5 on 5" pattern.

You didn't tell us about your truck, so I just guessed it's a 1/2 ton 2 wheel drive.

dropdprpls10 · 09-06-2004, 09:22 AM

here this link helped me out many times.. you need adobe reader to open it though
http://www.customwheelsunlimited.com...ication5.0.pdf

96gmcsierra · 09-10-2004, 11:03 PM

Thnaks for your replies,

Yes it is a 1/2 ton 2 wd. I was looking at that pdf file but I would like to know if the the 01-03 gmc denali rims would fit on my truck? I just want to make sure before I purchase. Thanks for any help!!

*Sublvr72* · 09-11-2004, 01:26 AM

denali rims are a no go, bolt pattern is 6 x 5.5. Thats a 6 lug. You could run them IF you are running adapters, but I do not recommend adapters because they are not safe.

96gmcsierra · 09-13-2004, 10:08 PM

But I do have 6 lugs? Is this not normal ona a 1500

Tx Firefighter · 09-13-2004, 10:16 PM

You have a 1/2 ton 2 wheel drive 96 model truck with 6 lug wheels?

Post a picture please, I got to see it to believe it.

Izzy · 09-14-2004, 09:23 AM

Quote:

Originally Posted by Tx Firefighter

You have a 1/2 ton 2 wheel drive 96 model truck with 6 lug wheels?

Post a picture please, I got to see it to believe it.

I agree, if it's a 96 6 lug than it's gotta be gotta be a 4wd. If that's the case the denali wheels will work.

*Sublvr72* · 09-14-2004, 11:29 AM

I disagree! If you have a 6 lug 96 non 4x4 then its a 2500 light wieght. GM made a few 6 lug 3/4 ton trucks and slapped 2500 badges on them. So Tx Firefighter, if thats what you have then denali wheels WILL fit on your truck

Tx Firefighter · 09-14-2004, 04:43 PM

Quote:

Originally Posted by Sublvr72

I disagree! If you have a 6 lug 96 non 4x4 then its a 2500 light wieght. GM made a few 6 lug 3/4 ton trucks and slapped 2500 badges on them. So Tx Firefighter, if thats what you have then denali wheels WILL fit on your truck

Well then, a 2500 light weight 3/4 ton wouldn't be a half ton now would it? I'll stand my ground on this one. Show me a factory 1500 2wd 1/2 ton truck with 6 lug wheels made in 96.

96gmcsierra · 09-14-2004, 08:34 PM

Wupps sorry you guys are right. I got them confused with my mazda truck. It is a 5 lug. Sorry about the confusion. That does suck though I really liked the denali rims oh well!

09-06-2004, 12:57 AM	#1
96gmcsierra Registered User Join Date: Sep 2004 Location: Miami, FL Posts: 7	Newbie here! Need the bolt pattern for a 96 gmc sierra! THanks for any help! Hey guys, Just traded in my 92 camaro for a 1996 gmc sierra with 72k miles. I just wanted to know if anyone had the bolt pattern for truck. Any help would be appreciated. Thanks, 96gmcsierra

09-06-2004, 06:33 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	1/2 ton 2 wheel drive is 5 on 5" pattern. You didn't tell us about your truck, so I just guessed it's a 1/2 ton 2 wheel drive. __________________ I'm on the Instagram- @Gearhead_Kevin

09-13-2004, 10:16 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You have a 1/2 ton 2 wheel drive 96 model truck with 6 lug wheels? Post a picture please, I got to see it to believe it. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-06-2004, 09:22 AM	#3
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	here this link helped me out many times.. you need adobe reader to open it though http://www.customwheelsunlimited.com...ication5.0.pdf

09-10-2004, 11:03 PM	#4
96gmcsierra Registered User Join Date: Sep 2004 Location: Miami, FL Posts: 7	Thnaks for your replies, Yes it is a 1/2 ton 2 wd. I was looking at that pdf file but I would like to know if the the 01-03 gmc denali rims would fit on my truck? I just want to make sure before I purchase. Thanks for any help!!

09-11-2004, 01:26 AM	#5
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	denali rims are a no go, bolt pattern is 6 x 5.5. Thats a 6 lug. You could run them IF you are running adapters, but I do not recommend adapters because they are not safe.

09-13-2004, 10:08 PM	#6
96gmcsierra Registered User Join Date: Sep 2004 Location: Miami, FL Posts: 7	But I do have 6 lugs? Is this not normal ona a 1500

09-14-2004, 11:29 AM	#9
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	I disagree! If you have a 6 lug 96 non 4x4 then its a 2500 light wieght. GM made a few 6 lug 3/4 ton trucks and slapped 2500 badges on them. So Tx Firefighter, if thats what you have then denali wheels WILL fit on your truck

09-14-2004, 08:34 PM	#11
96gmcsierra Registered User Join Date: Sep 2004 Location: Miami, FL Posts: 7	Wupps sorry you guys are right. I got them confused with my mazda truck. It is a 5 lug. Sorry about the confusion. That does suck though I really liked the denali rims oh well!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.