More disc brake questions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmil1974 · 05-17-2002, 03:40 PM

I want to go with the 6 lug rotor kit from MIke McGaughy's as I saw recommended here. Will these bolt to my stock spindles? I want to make this a bolt-on affair without buying the $1000+ kit. The less costly, the better. Will 71-72 boneyard spindles fill the bill here? Once I have this kit and spindles, I'll need the master cyl/booster/prop valve, I know. Can I get one of these setups from a boneyard (years?)? What else will I need? ANY help would be greatly appreciated as I need a detailed list to figure an almost exact cost before I start.
Btw, my truck is a 69 2WD 1/2 ton with manual drums.

Thanks!
Jason

05-17-2002, 03:40 PM	#1
jmil1974 Ain't we cute? Join Date: May 2002 Location: Friendswood, TX Posts: 700	More disc brake questions? I want to go with the 6 lug rotor kit from MIke McGaughy's as I saw recommended here. Will these bolt to my stock spindles? I want to make this a bolt-on affair without buying the $1000+ kit. The less costly, the better. Will 71-72 boneyard spindles fill the bill here? Once I have this kit and spindles, I'll need the master cyl/booster/prop valve, I know. Can I get one of these setups from a boneyard (years?)? What else will I need? ANY help would be greatly appreciated as I need a detailed list to figure an almost exact cost before I start. Btw, my truck is a 69 2WD 1/2 ton with manual drums. Thanks! Jason __________________ 69 C10 2WD LWB Fleet 350/350 power front disc conversion (6 lug disc kit from gmcpauls) and new engine, PS, A/C, fresh fluids, SHE DRIVES! FOR SALE $3900

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.