Progress made - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hambone1958 · 02-01-2005, 09:10 AM

Got the BBC set in place. Put the serpinetine belt and pulleys on also the headers. Got the cab painted over the weekend.

Pics are at the webshots link below.

**Yukon Jack** · 02-01-2005, 11:02 AM

If you edit your signature like this, it will be a clickable link to your website

[u r l="http://community.webshots.com/user/hambone1958"]Project Jumpin Jimmy Web Page[/u r l] just take out the spaces I put in u r l - had to do that so you could see what to type.

Nice looking pulley system.

hambone1958 · 02-01-2005, 11:23 AM

Thanks for the info Jack.

**'70_402** · 02-01-2005, 12:12 PM

Where Did You Get You Serp Belt System.. Looking For One For Mine But Don't Want To Spend 1000 Bucks...

Just Curious

hambone1958 · 02-01-2005, 12:23 PM

Got it from march performance. www.marchperf.com

It included the water pump atl. a/c compressor and power steering pump it's the ultra kit.

I think it was around $2500.

But i had to have it.

**'70_402** · 02-02-2005, 04:02 PM

You Had To Have It And I Think I Had To Have A Heart Attack Just Now... Wow....2500...umm I Think I Might Pass On That System....wow

cheyenne10 · 02-02-2005, 04:27 PM

Not to change subject but a few questions on paint. Finally someone who painted rear cab wall and floor. I see a lot of trucks with these areas unpainted. I assume so access can be had to crawl in and paint.

What type and brand of paints did you use on body, frame and motor?

thanks for sharing.

*Randy70C-10* · 02-02-2005, 06:31 PM

Nice job on the cab!!

**Canadian694x4** · 02-02-2005, 06:52 PM

Great work...thanks for the link to pics!

Swbman · 02-02-2005, 07:11 PM

Nice Job,you just gotta luv the 2 tone paint scheme...keep up the good work..

hambone1958 · 02-10-2005, 09:14 AM

cheyenne10 the engine was painted when i got it.

The frame is Dupont 99Black centari hardened.

The roof is dupont chromabase 817K alt 1
gm code 5111
with a vs1 sealer under coat

The body is dupont chromabase 5183 alt 1
gm code 5190
with a vs4 sealer under coat

The firewall is dupont chromabase 99k base

the cab is clear coated in dupont 7900.

Sorry it took so long but i had to go ask.

02-01-2005, 09:10 AM	#1
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	Progress made Got the BBC set in place. Put the serpinetine belt and pulleys on also the headers. Got the cab painted over the weekend. Pics are at the webshots link below. __________________ Alan

02-01-2005, 11:02 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,688	If you edit your signature like this, it will be a clickable link to your website [u r l="http://community.webshots.com/user/hambone1958"]Project Jumpin Jimmy Web Page[/u r l] just take out the spaces I put in u r l - had to do that so you could see what to type. Nice looking pulley system. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-01-2005, 11:23 AM	#3
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	Thanks for the info Jack. __________________ Alan

02-01-2005, 12:12 PM	#4
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Where Did You Get You Serp Belt System.. Looking For One For Mine But Don't Want To Spend 1000 Bucks... Just Curious __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

02-01-2005, 12:23 PM	#5
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	Got it from march performance. www.marchperf.com It included the water pump atl. a/c compressor and power steering pump it's the ultra kit. I think it was around $2500. But i had to have it. __________________ Alan

02-02-2005, 04:02 PM	#6
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	You Had To Have It And I Think I Had To Have A Heart Attack Just Now... Wow....2500...umm I Think I Might Pass On That System....wow __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

02-02-2005, 04:27 PM	#7
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	shes a beauty Not to change subject but a few questions on paint. Finally someone who painted rear cab wall and floor. I see a lot of trucks with these areas unpainted. I assume so access can be had to crawl in and paint. What type and brand of paints did you use on body, frame and motor? thanks for sharing. __________________ Bob

02-02-2005, 06:31 PM	#8
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Nice job on the cab!!

02-02-2005, 06:52 PM	#9
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Great work...thanks for the link to pics! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

02-02-2005, 07:11 PM	#10
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Nice Job,you just gotta luv the 2 tone paint scheme...keep up the good work.. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

02-10-2005, 09:14 AM	#11
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	All Dupont cheyenne10 the engine was painted when i got it. The frame is Dupont 99Black centari hardened. The roof is dupont chromabase 817K alt 1 gm code 5111 with a vs1 sealer under coat The body is dupont chromabase 5183 alt 1 gm code 5190 with a vs4 sealer under coat The firewall is dupont chromabase 99k base the cab is clear coated in dupont 7900. Sorry it took so long but i had to go ask. __________________ Alan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.