Update pics, New steel blazer tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low69CST · 02-06-2005, 11:54 AM

I trashed my plastic tank and got a repro steel tank. It's a very nice peice. Looks like it's OE instead of repro. Only problem has been my hidden hitch. The lip of the tank hits the hitch, and the hitch blocks where the rear strap should go. I've yanked it off and started trimming on that. The filter thing is something my dad bought to use to keep dirt out of the vent hoses. We're trying figure out where to put gas in it now. The other pic is a better picture of my rear sway bar.

Deuce · 02-06-2005, 02:04 PM

Thats a nice looking set-up. The possibilities of where to put the gas filler I have seen so far are: Marker light,bed floor and stakepocket(ask Primeredthunder)
Keep up the good work!!!!

lofly'a · 02-06-2005, 04:31 PM

i like that sway bar setup. is that factory? how would it work with an airbag setup? i've never even seen one on a trailing arm setup 67-72.

02-06-2005, 11:54 AM	#1
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Update pics, New steel blazer tank I trashed my plastic tank and got a repro steel tank. It's a very nice peice. Looks like it's OE instead of repro. Only problem has been my hidden hitch. The lip of the tank hits the hitch, and the hitch blocks where the rear strap should go. I've yanked it off and started trimming on that. The filter thing is something my dad bought to use to keep dirt out of the vent hoses. We're trying figure out where to put gas in it now. The other pic is a better picture of my rear sway bar. Attached Images __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

02-06-2005, 02:04 PM	#2
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Thats a nice looking set-up. The possibilities of where to put the gas filler I have seen so far are: Marker light,bed floor and stakepocket(ask Primeredthunder) Keep up the good work!!!! __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

02-06-2005, 04:31 PM	#3
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	i like that sway bar setup. is that factory? how would it work with an airbag setup? i've never even seen one on a trailing arm setup 67-72. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.