Parting out 1975 1/2 Ton 2 wheel drive - The 1947 - Present Chevrolet & GMC Truck Message Board Network

King_Cobra · 05-30-2002, 12:50 AM

I am parting out my 1975 Chverolet 2 wheel drive 1/2 ton. Because part of the frame is cracked and the front suspension crossmember was cracked. Tell me what you need and I will see if I have it.

bigblock73 · 05-30-2002, 08:05 AM

Hi, is the truck equipped with a headliner?

If so I would be interested in the following...

1. Drivers side windshiled pillar interior trim piece

2. Drivers side interior rear window trim piece (the one that is directly over your left shoulder when driving).

thanks! -Jeff

1974ChevyC10 · 05-31-2002, 02:59 AM

i need the fenders,doors,bed,inner fenderwells,and some other small things i cant think of right now.email me back at cheyennesuper9@aol.com with what you have and pics if you got it.

*Fast68Chevy* · 06-01-2002, 05:41 PM

i may have some of those trim pieces if cobra doesnt, i got a 79 silverado last night with totally trashed cab wayyyyyyyyyyyy beyond any repair

BigBlockBurris · 06-02-2002, 09:52 PM

Did it have a HEI Distributer? Let me know. Thanks

BBB

littlebubba · 06-04-2002, 02:04 AM

Does that pickup have the trans crossmember with the double humps-one on each side- to run a dual exhaust setup? I would be interested in it if it does, and how much? email me

05-30-2002, 12:50 AM	#1
King_Cobra Registered User Join Date: Apr 2002 Location: Quincy, WA, USA Posts: 25	Parting out 1975 1/2 Ton 2 wheel drive I am parting out my 1975 Chverolet 2 wheel drive 1/2 ton. Because part of the frame is cracked and the front suspension crossmember was cracked. Tell me what you need and I will see if I have it. __________________ 1945 Chevy 1/2 Ton 1953 Suburban 1955 SWB Big Window 2 1959 Chevy Fleetside 1966 Chevy 1/2 Ton 1975 1/2 Ton 1984 1/2 4X4

05-31-2002, 02:59 AM	#3
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	i need the fenders,doors,bed,inner fenderwells,and some other small things i cant think of right now.email me back at cheyennesuper9@aol.com with what you have and pics if you got it. __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

06-01-2002, 05:41 PM	#4
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	i may have some of those trim pieces if cobra doesnt, i got a 79 silverado last night with totally trashed cab wayyyyyyyyyyyy beyond any repair Last edited by Fast68Chevy; 06-02-2002 at 10:24 AM.

06-02-2002, 09:52 PM	#5
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Parts ? Did it have a HEI Distributer? Let me know. Thanks BBB

06-04-2002, 02:04 AM	#6
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 321	Trans crossmember needed Does that pickup have the trans crossmember with the double humps-one on each side- to run a dual exhaust setup? I would be interested in it if it does, and how much? email me

05-30-2002, 08:05 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Hi, is the truck equipped with a headliner? If so I would be interested in the following... 1. Drivers side windshiled pillar interior trim piece 2. Drivers side interior rear window trim piece (the one that is directly over your left shoulder when driving). thanks! -Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.