Electric choke hook up ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyguy111786 · 02-25-2005, 03:04 PM

Where does the wire for the electic choke go? I thought i had it but i when i plugged it in, my temp gauge read all the way to hot...so i think i found out why my temp gauge doesn't work...but wheres the wire for my electric choke? i have an Edelbrock 1406 on a 305 in a 78.

60-66 Nut · 02-25-2005, 04:12 PM

Chevyguy, none of the 78's I've seen came with electric choke, only the manifold heat choke. You might not have a wire for it. All you need is a wire hooked into the fuse block on one of the terminals that are hot only when the key is on. Hope that helps.

60-66 Nut

alpha_male0203 · 02-25-2005, 05:12 PM

Find a hot spot then a ground thats what i did i dont a have close pic or i would help but i have this one. There a red going in the back.
then i drilled a hole in the alt. cover for a good ground.

You cant see the black or the red but you can see in the right side there is a wire that is behind the 2 hoses its connect right there sorry if that dont help, and if it does thats good.

Chevyguy111786 · 02-25-2005, 08:12 PM

oh so all it needs is 12 volts huh? sweet...didn't know if that was the case or not, thanks guys!

02-25-2005, 03:04 PM	#1
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Electric choke hook up ?? Where does the wire for the electic choke go? I thought i had it but i when i plugged it in, my temp gauge read all the way to hot...so i think i found out why my temp gauge doesn't work...but wheres the wire for my electric choke? i have an Edelbrock 1406 on a 305 in a 78.

02-25-2005, 04:12 PM	#2
60-66 Nut Professional Beer Tester Join Date: Aug 2004 Location: Louisiana Posts: 453	Chevyguy, none of the 78's I've seen came with electric choke, only the manifold heat choke. You might not have a wire for it. All you need is a wire hooked into the fuse block on one of the terminals that are hot only when the key is on. Hope that helps. 60-66 Nut __________________ 60 Ford F100 Custom Cab 61 Apache Short Fleetside 64 C10 Short Stepside 65 C80 409 V8 5spd(X-Firetruck) 83 GMC 350 Olds Diesel 85 GMC Short Bed 86 GMC Short Bed 90 GMC R3500 Crew Cab 92 GMC 1500

02-25-2005, 05:12 PM	#3
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Find a hot spot then a ground thats what i did i dont a have close pic or i would help but i have this one. There a red going in the back. then i drilled a hole in the alt. cover for a good ground. You cant see the black or the red but you can see in the right side there is a wire that is behind the 2 hoses its connect right there sorry if that dont help, and if it does thats good. Attached Images __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2005, 08:12 PM	#4
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	oh so all it needs is 12 volts huh? sweet...didn't know if that was the case or not, thanks guys!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.