'87 GMC parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kevin45 · 03-06-2005, 10:21 PM

Parting out an '87 GMC High Sierra. The doghouse is in fantastic shape except for three small rust holes on the inside of the passenger side front fender. Outer fenders are in great shape with no rust. New inner fenders. Grille is like new. Everything complete, including jack, and window washer jug, radiator. $400.00 and you pick up. Cab complete with a great interior, red in color. Cab corners and rockers are gone. Doors are in great shape with no rust, door panels have some fade on top, new carpet, dash pad cracked, tilt wheel, and new seat. Truck is original air conditioning. $350.00 and you pick up. The frame of the truck is shot. Rusted in half. Third member is a 10 bolt and I believe a 3:73 but not for sure. Can check for sure if any interest is shown. Front end has had some work done as far as ball joints, etc. in the last couple of years. The bed of the truck has been sold. The truck was a wideside shortbed. All glass is good. Front bumper is good with no dents but not show quality. Rear bumper has rust and is an aftermarket. I really don't want to part out piece by piece as my interest was not in the truck originally but I bought it for the engine. I will not ship parts. If someone else wants to buy it and do that, then that is fine. I can send pics on request if you send me your e-mail.

Kevin

muddyole 69 · 03-08-2005, 05:50 AM

was this a standard tranny truck if so I am interested in tilt and pedals would buy the cab if I had to for those items let me know via pm or post thanks Mike

Kevin45 · 03-08-2005, 04:56 PM

Sorry. Failed to mention it is an automatic, with tilt and cruise.

Kevin

Kevin45 · 03-08-2005, 07:16 PM

Also forgot to mention. Package deal!!!!! You take both, $550.

tomSmith · 03-14-2005, 12:25 PM

any pics

Kevin45 · 03-14-2005, 08:44 PM

Hopefully these pics will come thru. If I can get rid of it this week, I will let what you see, go for $500. The wiring harness and the computer is gone. And I am keeping the wheels and tires. As I stated before the doghouse is in great shape. A couple of hail dents and scratches in the hood. Fairly new redo on the seat. Doors are in great shape. Door panels have a little fade. New carpet. Has had some work done on the front end in the last couple of years. Rear is a 10 bolt. Both tanks have been pulled and the driver side tank has a new sending unit (worth a little bit in itself) I was going to keep the sending unit but will let it go with the truck. The frame IS TOAST. It needs new rockers and cab corners. It has about one chance to get on and off of a trailer as the frame is split right behind the tanks. Front bumper is in good shape. Back bumper is rusted aftermarket. Both inner fenders are new. Flowmaster 3" single exhaust a little over a year old with hardly any miles on it. Again...I really don't want to part out as I need my garage space pretty quickly. $500 firm for everything. I can take pics of anything else you need to see.

I'll post some more pics in a minute.

Kevin

Kevin45 · 03-14-2005, 08:48 PM

The rest of the pics:

bigarmzz · 03-14-2005, 09:36 PM

man, ...call me nuts, but why in the world are ya parting that thing out?

looks too nice to part...

edit***

nevermind...i just re-read where ya said the frame was flubbed up

parts look nice though....ya might have to reconsider not shipping anything though...lots of peeps on here are from all over the u.s. ya know....

Kevin45 · 03-14-2005, 10:15 PM

Quote:

man, ...call me nuts, but why in the world are ya parting that thing out?

I only bought it for the engine and tranny. Once I saw the complete truck I decided to get the complete thing and seperate it. It also bought me some time in getting the motor out. It was a well taken care of truck until the frame folded on the guy. I'm needing my garage back so I can get my '93 in and get started on it. My '89 Silverado was in the shop all last summer and I don't want my '93 going the same route this summer.

Kevin

lloyd k · 03-15-2005, 04:52 PM

how are the leaf springs?i live in columbus,email gmc500cid@wowway.com

John39671 · 03-15-2005, 07:26 PM

I am interested in the seat belts, carpet, and mabey door panels and visors. How much for the package deal? PM me with price

Kevin45 · 03-17-2005, 05:24 AM

Doors and panels are gone, I will know this weekend on the seat, carpet, and belts. I have to strip the dash and get the column out yet. I will compile a list of what is left this weekend. Have a full plate at the moment.

Kevin

MylilBowTie · 03-17-2005, 05:50 AM

If the deal with the bench seat doesn't happen I want it. Let me know what you are asking for it, I can pick it up.

'72 Chevy Suburban · 03-17-2005, 07:35 AM

Put me in line for the seat and the seat belts if the other deals fall through.

Thanks,

John39671 · 03-17-2005, 07:22 PM

Im still interested in the belts and carpet.

MylilBowTie · 03-18-2005, 06:18 PM

Check your PMs

Kevin45 · 03-20-2005, 07:31 AM

Here is what's left. A cab with a totally shot rusted frame. Needs Cab Corners and rockers. Glass is good. No interior. Front end had had some new bushings etc in the last few years. The front unbolts so would be a good candidate for swapping into another ride. Steering box is good, Leaf springs and rearend is good. Cost = FREEBIES. I am keeping the wheels and tires and steering column, Frame and cab must go as a package deal.

Instrument cluster = $25 + ride and Dash Bezel goes with it. It is a little hacked where the previous owner put in an aftermarket radio.

Doghouse = $300 this is an excellant shape doghouse with new inner fenders, radiator was boiled out 2 years ago. Hood has some scratched in it but nothing major. Grille is excellant.

700R4 = $400 and has been rebuilt a few years ago.

Dual tanks = $50. The drivers tank has a new sending unit and one new strap. All brackets included. The sending unit alone is worth more than that. I also have the fuel pump which is the same age. Although I am not quite sure what it looks like. If it is plastic and sits directly underneath the cab with the fuel lines and a (I think) 6 wire plug then that is it.

MylilBowTie · 03-20-2005, 07:32 AM

You have a pm

Kevin45 · 03-20-2005, 05:00 PM

Just to let everyone know....everything is sold except the 700R4 and the doghouse. And I do have to say that I have met a lot of great people from this site. Either by phone or in person

And from the almost dozen that I have spoke with or met in person, everyone has been super to talk to. Makes all the bad things in the world a little more tolerable.

Kevin

wdz28ss · 03-24-2005, 11:44 PM

i need a 87 + air cleaner assy. do you have one laying around?

Kevin45 · 03-25-2005, 07:58 AM

No it never did have the factory air cleaner anyways. It was an aftermarket. BTW everything else has been sold.

Kevin

03-06-2005, 10:21 PM	#1
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	'87 GMC parting out Parting out an '87 GMC High Sierra. The doghouse is in fantastic shape except for three small rust holes on the inside of the passenger side front fender. Outer fenders are in great shape with no rust. New inner fenders. Grille is like new. Everything complete, including jack, and window washer jug, radiator. $400.00 and you pick up. Cab complete with a great interior, red in color. Cab corners and rockers are gone. Doors are in great shape with no rust, door panels have some fade on top, new carpet, dash pad cracked, tilt wheel, and new seat. Truck is original air conditioning. $350.00 and you pick up. The frame of the truck is shot. Rusted in half. Third member is a 10 bolt and I believe a 3:73 but not for sure. Can check for sure if any interest is shown. Front end has had some work done as far as ball joints, etc. in the last couple of years. The bed of the truck has been sold. The truck was a wideside shortbed. All glass is good. Front bumper is good with no dents but not show quality. Rear bumper has rust and is an aftermarket. I really don't want to part out piece by piece as my interest was not in the truck originally but I bought it for the engine. I will not ship parts. If someone else wants to buy it and do that, then that is fine. I can send pics on request if you send me your e-mail. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-08-2005, 05:50 AM	#2
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	parts was this a standard tranny truck if so I am interested in tilt and pedals would buy the cab if I had to for those items let me know via pm or post thanks Mike __________________ hav'n fun be'n me

03-08-2005, 04:56 PM	#3
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Sorry. Failed to mention it is an automatic, with tilt and cruise. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-08-2005, 07:16 PM	#4
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Also forgot to mention. Package deal!!!!! You take both, $550. __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-14-2005, 12:25 PM	#5
tomSmith Registered User Join Date: Feb 2004 Location: North Bend , Ohio Posts: 54	front clip any pics

03-14-2005, 08:44 PM	#6
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Hopefully these pics will come thru. If I can get rid of it this week, I will let what you see, go for $500. The wiring harness and the computer is gone. And I am keeping the wheels and tires. As I stated before the doghouse is in great shape. A couple of hail dents and scratches in the hood. Fairly new redo on the seat. Doors are in great shape. Door panels have a little fade. New carpet. Has had some work done on the front end in the last couple of years. Rear is a 10 bolt. Both tanks have been pulled and the driver side tank has a new sending unit (worth a little bit in itself) I was going to keep the sending unit but will let it go with the truck. The frame IS TOAST. It needs new rockers and cab corners. It has about one chance to get on and off of a trailer as the frame is split right behind the tanks. Front bumper is in good shape. Back bumper is rusted aftermarket. Both inner fenders are new. Flowmaster 3" single exhaust a little over a year old with hardly any miles on it. Again...I really don't want to part out as I need my garage space pretty quickly. $500 firm for everything. I can take pics of anything else you need to see. I'll post some more pics in a minute. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-14-2005, 08:48 PM	#7
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	The rest of the pics: __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-14-2005, 09:36 PM	#8
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	man, ...call me nuts, but why in the world are ya parting that thing out? looks too nice to part... edit*** nevermind...i just re-read where ya said the frame was flubbed up parts look nice though....ya might have to reconsider not shipping anything though...lots of peeps on here are from all over the u.s. ya know.... __________________ 1987 350 TBI lowered 5/7 Last edited by bigarmzz; 03-14-2005 at 09:39 PM.

03-15-2005, 04:52 PM	#10
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	how are the leaf springs?i live in columbus,email gmc500cid@wowway.com

03-15-2005, 07:26 PM	#11
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	I am interested in the seat belts, carpet, and mabey door panels and visors. How much for the package deal? PM me with price __________________ Dissabled Veteran U.S.M.C 1985-1989

03-17-2005, 05:24 AM	#12
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Doors and panels are gone, I will know this weekend on the seat, carpet, and belts. I have to strip the dash and get the column out yet. I will compile a list of what is left this weekend. Have a full plate at the moment. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-17-2005, 05:50 AM	#13
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	If the deal with the bench seat doesn't happen I want it. Let me know what you are asking for it, I can pick it up. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

03-17-2005, 07:35 AM	#14
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	Put me in line for the seat and the seat belts if the other deals fall through. Thanks, __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

03-17-2005, 07:22 PM	#15
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	Im still interested in the belts and carpet. __________________ Dissabled Veteran U.S.M.C 1985-1989

03-18-2005, 06:18 PM	#16
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Check your PMs __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI



Register or Log In To remove these advertisements.

03-20-2005, 07:31 AM	#17
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Here is what's left. A cab with a totally shot rusted frame. Needs Cab Corners and rockers. Glass is good. No interior. Front end had had some new bushings etc in the last few years. The front unbolts so would be a good candidate for swapping into another ride. Steering box is good, Leaf springs and rearend is good. Cost = FREEBIES. I am keeping the wheels and tires and steering column, Frame and cab must go as a package deal. Instrument cluster = $25 + ride and Dash Bezel goes with it. It is a little hacked where the previous owner put in an aftermarket radio. Doghouse = $300 this is an excellant shape doghouse with new inner fenders, radiator was boiled out 2 years ago. Hood has some scratched in it but nothing major. Grille is excellant. 700R4 = $400 and has been rebuilt a few years ago. Dual tanks = $50. The drivers tank has a new sending unit and one new strap. All brackets included. The sending unit alone is worth more than that. I also have the fuel pump which is the same age. Although I am not quite sure what it looks like. If it is plastic and sits directly underneath the cab with the fuel lines and a (I think) 6 wire plug then that is it. __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!! Last edited by Kevin45; 03-20-2005 at 11:45 AM. Reason: Forgot something

03-20-2005, 07:32 AM	#18
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	You have a pm __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

03-20-2005, 05:00 PM	#19
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Just to let everyone know....everything is sold except the 700R4 and the doghouse. And I do have to say that I have met a lot of great people from this site. Either by phone or in person And from the almost dozen that I have spoke with or met in person, everyone has been super to talk to. Makes all the bad things in the world a little more tolerable. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

03-24-2005, 11:44 PM	#20
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	i need a 87 + air cleaner assy. do you have one laying around? __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

03-25-2005, 07:58 AM	#21
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	No it never did have the factory air cleaner anyways. It was an aftermarket. BTW everything else has been sold. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.