1971 CST for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Blazer · 03-08-2005, 04:21 PM

Well I never thought this day would come but here it is just the same...

'71 K5 CST
413ci smallblock (400; .060 over)
Comp Cams HE268 cam
Comp Cams roller rockers
New Edelbrock Performer carb
New Edelbrock Performer RPM intake
New HEI distributor
New AC Delco Rapid Fire plugs
New MSD Helicore wires
New K&N 4" air filter and housing

The engine runs very strong, detailing was done to the engine compartment while the engine was out so it looks good too. This was my daily driver off and on until 2003 when I started the engine project. Below is a short history of my ownership:

2001: Purchased in Duvall, WA.

2001: Installed full carpet set (ACC- dark saddle), replaced rocker panels, installed forward roll cage (Smittybuilt), installed new front bumper, installed wood grip steering wheel (classy!).

2003: Began installation of fold-and-tumble rear seat. This project needs to be completed. Includes shoulder belts for the front seats and all the attaching hardware for the rear seat. I still have the rear seat that was in the truck when I bought it (not original). Installed original AM radio in the dash and a Sony AM/FM/CD player in the glovebox with an amp under the passenger seat.

2003-4: Engine was torn down and inspected. I replaced one bad lifter everything else looked clean and well maintained. There is a rebuild tag on the engine block that shows it was rebuilt in 1989 and bored .060 over. The crank was turned .010 under at the same time.

The rest of the drivetrain is stock; TH350, NP 205, 12bolt limited-slip rear end, both axles are 3.07 gear ratio.

I'm asking $4700 on craigslist but I've really appreciated all the help and camaraderie on this board. So if I could make a (potential?) board member happy with a solid truck to build from I'd be willing to make a deal.

For the sake of consistency I'll ask $4700 here too but make me an offer and hopefully it can stay here on this board for us all (me) to enjoy

Thanks,
Nate
Hm: 360.678.1086

redz 1970 K5 · 03-08-2005, 04:40 PM

That is WORTH what you are asking for sure! I sure hope someone here picks it up from you.

I guarantee that you will have 0 problems selling it for what you are asking. You could eat off of that engine!

bouncytruck · 03-08-2005, 04:44 PM

Wow, that is a heck of a deal! That thing will sell quick at that price. Sorry you have to sell. I hope a board member picks it up!

71Blazer · 03-08-2005, 05:23 PM

Thanks guys, I hope you are right!

LUV2XCLR8 · 03-08-2005, 07:25 PM

Man Oh Man, I Wish I Could Have 2

71Blazer · 03-08-2005, 08:01 PM

Oh, well sure you can. You can work your way backward and have a K5 CST for every year they were made.

LUV2XCLR8 · 03-08-2005, 09:04 PM

Quote:

Originally Posted by 71Blazer

Oh, well sure you can. You can work your way backward and have a K5 CST for every year they were made.

THAT WOULD WORK FOR ME, AS LONG AS THE 70, AND 69 WERE 2WD

71Blazer · 03-08-2005, 09:12 PM

Oh, of course. You wouldn't want to have too many 4X4's... wait is that possible?

LUV2XCLR8 · 03-08-2005, 09:15 PM

Quote:

Originally Posted by 71Blazer

Oh, of course. You wouldn't want to have too many 4X4's... wait is that possible?

YOU CAN NEVER HAVE 2 MANY

DID YOU MAKE THAT CUSTOM FLIP REAR SEAT

PRETTY

, HELPS W/ THE GROCERIES EH

71Blazer · 03-08-2005, 10:09 PM

No I stole it from the '84 blazer I had before the '71.

As you can see there wasn't a whole lot to be saved... at least not in sheet metal.

The bonus is seat belts for 3 in the back seat and of course the fold-and-tumble feature.

Yeah I'm not happy to be selling it but therapy is going well.

aktalon89 · 03-09-2005, 12:21 AM

any rust ??????? i like it

alfonzo · 03-09-2005, 07:39 AM

New to the board first off, But I have a 72 Blazer white with a sand color softtop, very clean been working on it off and on for years. No pics available at this time but I have a small favor, I need a picture of your fuse panel area,when I bought the truck it was a oneway plane ride to Lubbock Texas and I limped it back to Ft Worth and made it, but the guy that I bought it from owned a Audio and Alarm business and he had more crap wired into the truck I couldn't tell what was what and I have since taken it all out and I'm down to a couple things without intalling a new dash Harness (too expensive) So if you have digital camera could you snap me a couple pics of the fuse panel/horn relay wiring, I have a 72 factory service manual but I'm a little confused with a few wires. Would be greatly appreciated.

Alfonz

Huck · 03-09-2005, 08:58 AM

Welcome to the board from BAGDAD, Kentucky!
Alfonz, it would be best if you started your own new thred as opposed to tacking onto someone else's who is trying to sell his Blazer that way we can FOCUS on your problem and not confuse the issues. Which wires are you confused about? Got to get specific--like where to the plug in---what color, etc. Huck

teeitup · 03-09-2005, 02:10 PM

How is it for rust, can you get some pics of any rust areas close up. Thanks Randy

Scrubby · 03-09-2005, 02:42 PM

Yeah, I would be interested in the rust situtation too.

71Blazer · 03-09-2005, 04:15 PM

The digital camera I used to take the pics was borrowed so it would take some time to get more pictures... Here is some details on any rust that I originally spoke with Kurt (vtblazer) about:

Quote:

Overall the body is in good shape. I can tell there has been some work done to the front pass. side fender and there is a bubble forming rearward of the driverside rocker panel. I replaced both rockers when I first bought it and was able to look at the inside of the door pillars and at the rocker boxes which showed surface rust but nothing rotted through. The rocker boxes are real solid in fact. I suspect there may be some pinholes in the windshield channel corners or else the top leaks some at the front corners (big surprise!?) All in all it is a solid rig.

I debated whether or not to mention the soft top that came with it. It is old enough that I can't tell who the manufacturer was. All the hardware is in good shape, the top has no holes in the vinyl or windows and all the zippers work. The thing that needs repair are the sleeves that velcro around the door frame need to be stitched back on.

Thanks for your interest...
ttt

teeitup · 03-10-2005, 12:18 AM

Any bedfloor rust? Pics of bubbled area when you get them. I'm trying to get a shipping quote. Doors have any rust? Does it have 72 doors on it? It looks like the pass has the screw in it where the 72's do. Thanks for your time. Randy

R 78 PROJECT · 03-10-2005, 01:53 AM

condition of rocker boxes n inner fender wells?

mcmlxix · 03-10-2005, 02:27 AM

I would love to have it. I had to leave a 70 K5 in Pennsylvania when I moved to Las Vegas ... thats about 3000 miles away now... and was in mid tear down... besides, I dont think I could convince my better half to let me have it. .. Maybe if I put my Harley back together and sold it... but you're still 1500 miles away ...

71Blazer · 03-10-2005, 03:56 PM

Quote:

Any bedfloor rust? Pics of bubbled area when you get them. I'm trying to get a shipping quote. Doors have any rust? Does it have 72 doors on it? It looks like the pass has the screw in it where the 72's do. Thanks for your time

Randy, there is no bed floor rust that I can see from below or above. The bubble is small (pencil eraser size?) I don't have easy access to the camera but I'll give it a shot.

Doors have some surface rust along the bottom inside edge. Both doors have the black piece/screw just below the wing window, (I couldn't remember if that meant '71 or '72) and '72 door panels so I will say they are '72 doors.

Quote:

condition of rocker boxes n inner fender wells?

The rocker boxes are in good shape and solid all around. there is some minor surface (mentioned above) but overall in good solid shape. There is no rust on the rear inner fender wells and the front fender wells were removed and sent to the body shop, blasted and painted when the engine was out.

Quote:

I would love to have it. I had to leave a 70 K5 in Pennsylvania when I moved to Las Vegas ... thats about 3000 miles away now... and was in mid tear down... besides, I dont think I could convince my better half to let me have it. .. Maybe if I put my Harley back together and sold it... but you're still 1500 miles away ...

Keep working on her, my wife loved cruising in it esp. summer time, drop-top style. And you are in the perfect spot for that! I am the first to admit it isn't show quality perfect but I'm always jazzed everytime I drive it- someone will wave or give a thumbs up or talk to me about it when I'm stopped. The grin factor is BIG!

Thanks,
Nate

Steve N 69 69 69 · 03-11-2005, 07:40 AM

THat looks really nice. If you still have it after I get back from China (Mar.19th) I'd love to talk to you about it. Its just what I am looking for, and I'd much rather Buy from a board member, than hasstle with Ebay.
Thanks, Steve N

vtblazer · 03-11-2005, 08:38 PM

Here's a bump for ya Nate.
Good luck.

71Blazer · 03-14-2005, 06:08 PM

Thanks Kurt for the bump, and thanks to everyone who has shown interest in the blazer. I'll be replying to everyone today (my computer is at work and I can really only check mail during the week) thanks for your patience.

68nuke · 03-21-2005, 12:00 PM

Sent you a PM!

Milan

71Blazer · 03-21-2005, 09:30 PM

I believe I have a buyer...

Thanks to everyone who replied and had nice things to say. This isn't the end for me only a transition.

And thanks to Steve N 69 69 69 who I'm sure will love the blazer as much as I have. He'll enjoy many more topless days in So.Cal. than I ever did in N.W. Washington.

03-08-2005, 04:21 PM	#1
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	1971 CST for sale Well I never thought this day would come but here it is just the same... '71 K5 CST 413ci smallblock (400; .060 over) Comp Cams HE268 cam Comp Cams roller rockers New Edelbrock Performer carb New Edelbrock Performer RPM intake New HEI distributor New AC Delco Rapid Fire plugs New MSD Helicore wires New K&N 4" air filter and housing The engine runs very strong, detailing was done to the engine compartment while the engine was out so it looks good too. This was my daily driver off and on until 2003 when I started the engine project. Below is a short history of my ownership: 2001: Purchased in Duvall, WA. 2001: Installed full carpet set (ACC- dark saddle), replaced rocker panels, installed forward roll cage (Smittybuilt), installed new front bumper, installed wood grip steering wheel (classy!). 2003: Began installation of fold-and-tumble rear seat. This project needs to be completed. Includes shoulder belts for the front seats and all the attaching hardware for the rear seat. I still have the rear seat that was in the truck when I bought it (not original). Installed original AM radio in the dash and a Sony AM/FM/CD player in the glovebox with an amp under the passenger seat. 2003-4: Engine was torn down and inspected. I replaced one bad lifter everything else looked clean and well maintained. There is a rebuild tag on the engine block that shows it was rebuilt in 1989 and bored .060 over. The crank was turned .010 under at the same time. The rest of the drivetrain is stock; TH350, NP 205, 12bolt limited-slip rear end, both axles are 3.07 gear ratio. I'm asking $4700 on craigslist but I've really appreciated all the help and camaraderie on this board. So if I could make a (potential?) board member happy with a solid truck to build from I'd be willing to make a deal. For the sake of consistency I'll ask $4700 here too but make me an offer and hopefully it can stay here on this board for us all (me) to enjoy Thanks, Nate Hm: 360.678.1086 __________________ 1971 Blazer CST SOLD!

03-08-2005, 04:40 PM	#2
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	That is WORTH what you are asking for sure! I sure hope someone here picks it up from you. I guarantee that you will have 0 problems selling it for what you are asking. You could eat off of that engine! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

03-08-2005, 04:44 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Wow, that is a heck of a deal! That thing will sell quick at that price. Sorry you have to sell. I hope a board member picks it up! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-08-2005, 05:23 PM	#4
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	Thanks guys, I hope you are right! __________________ 1971 Blazer CST SOLD!

03-08-2005, 07:25 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Man Oh Man, I Wish I Could Have 2 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-08-2005, 08:01 PM	#6
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	Oh, well sure you can. You can work your way backward and have a K5 CST for every year they were made. __________________ 1971 Blazer CST SOLD!

03-08-2005, 09:12 PM	#8
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	Oh, of course. You wouldn't want to have too many 4X4's... wait is that possible? __________________ 1971 Blazer CST SOLD!

03-08-2005, 10:09 PM	#10
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	No I stole it from the '84 blazer I had before the '71. As you can see there wasn't a whole lot to be saved... at least not in sheet metal. The bonus is seat belts for 3 in the back seat and of course the fold-and-tumble feature. Yeah I'm not happy to be selling it but therapy is going well. __________________ 1971 Blazer CST SOLD!

03-09-2005, 12:21 AM	#11
aktalon89 Registered User Join Date: Mar 2005 Location: anchorage,alaska Posts: 39	any rust ??????? i like it

03-09-2005, 07:39 AM	#12
alfonzo Registered User Join Date: Feb 2005 Posts: 1	Need Help with a wiring issue on my 72 K5 New to the board first off, But I have a 72 Blazer white with a sand color softtop, very clean been working on it off and on for years. No pics available at this time but I have a small favor, I need a picture of your fuse panel area,when I bought the truck it was a oneway plane ride to Lubbock Texas and I limped it back to Ft Worth and made it, but the guy that I bought it from owned a Audio and Alarm business and he had more crap wired into the truck I couldn't tell what was what and I have since taken it all out and I'm down to a couple things without intalling a new dash Harness (too expensive) So if you have digital camera could you snap me a couple pics of the fuse panel/horn relay wiring, I have a 72 factory service manual but I'm a little confused with a few wires. Would be greatly appreciated. Alfonz

03-09-2005, 08:58 AM	#13
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Welcome to the board from BAGDAD, Kentucky! Alfonz, it would be best if you started your own new thred as opposed to tacking onto someone else's who is trying to sell his Blazer that way we can FOCUS on your problem and not confuse the issues. Which wires are you confused about? Got to get specific--like where to the plug in---what color, etc. Huck

03-09-2005, 02:10 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	How is it for rust, can you get some pics of any rust areas close up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-09-2005, 02:42 PM	#15
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Yeah, I would be interested in the rust situtation too.

03-10-2005, 12:18 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Any bedfloor rust? Pics of bubbled area when you get them. I'm trying to get a shipping quote. Doors have any rust? Does it have 72 doors on it? It looks like the pass has the screw in it where the 72's do. Thanks for your time. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-10-2005, 01:53 AM	#18
R 78 PROJECT <<< R 67 PROJECT Join Date: Aug 2004 Location: FortWorth Tx. Posts: 767	condition of rocker boxes n inner fender wells? __________________ NEW BABY!!! '67 STEPSIDE FRAME OFF PROJECT bullstowin40@sbcglobal.net -92 2wd burb 225k dailey driver -98 nissan quest the wifes -67 C-10 stepside my toy



Register or Log In To remove these advertisements.

03-10-2005, 02:27 AM	#19
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	I would love to have it. I had to leave a 70 K5 in Pennsylvania when I moved to Las Vegas ... thats about 3000 miles away now... and was in mid tear down... besides, I dont think I could convince my better half to let me have it. .. Maybe if I put my Harley back together and sold it... but you're still 1500 miles away ... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

03-11-2005, 07:40 AM	#21
Steve N 69 69 69 Registered User Join Date: Mar 2005 Location: Pasadena Area, Ca. Posts: 33	looks nice THat looks really nice. If you still have it after I get back from China (Mar.19th) I'd love to talk to you about it. Its just what I am looking for, and I'd much rather Buy from a board member, than hasstle with Ebay. Thanks, Steve N Last edited by Steve N 69 69 69; 03-11-2005 at 07:43 AM.

03-11-2005, 08:38 PM	#22
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Here's a bump for ya Nate. Good luck.

03-14-2005, 06:08 PM	#23
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	Thanks Kurt for the bump, and thanks to everyone who has shown interest in the blazer. I'll be replying to everyone today (my computer is at work and I can really only check mail during the week) thanks for your patience. __________________ 1971 Blazer CST SOLD!

03-21-2005, 12:00 PM	#24
68nuke Registered User Join Date: Mar 2005 Location: Norfolk, VA Posts: 10	Sent you a PM! Milan

03-21-2005, 09:30 PM	#25
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	I believe I have a buyer... Thanks to everyone who replied and had nice things to say. This isn't the end for me only a transition. And thanks to Steve N 69 69 69 who I'm sure will love the blazer as much as I have. He'll enjoy many more topless days in So.Cal. than I ever did in N.W. Washington. __________________ 1971 Blazer CST SOLD!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.