tranny leaking problem?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 03-12-2005, 01:45 PM

ever since i changed my speedo gears, the speedo cable housing is leaking a little bit. i didnt see anything like a gasket or o ring sealing it before. what is the problem?

NeCrOmAnCeR · 03-13-2005, 09:30 AM

Are you talking about the "bullet" which the speedo cable screws onto or the rear housing? Both should have an o-ring around them. I have had to replace the "bullet" before because the internal seal was bad. You probibly need to replace the o-ring, in a pinch some RTV will work.

Hoods69BadBowTie · 03-13-2005, 11:51 AM

Yeah, if thats what your talking about there should be a little o-ring to replace.
-Later

03-12-2005, 01:45 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	tranny leaking problem?? ever since i changed my speedo gears, the speedo cable housing is leaking a little bit. i didnt see anything like a gasket or o ring sealing it before. what is the problem?

03-13-2005, 11:51 AM	#3
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Yeah, if thats what your talking about there should be a little o-ring to replace. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-13-2005, 09:30 AM	#2
NeCrOmAnCeR Registered User Join Date: Feb 2004 Location: Hodgenville, Ky Posts: 735	Are you talking about the "bullet" which the speedo cable screws onto or the rear housing? Both should have an o-ring around them. I have had to replace the "bullet" before because the internal seal was bad. You probibly need to replace the o-ring, in a pinch some RTV will work.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.