![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
72GMC51
Join Date: Jul 2004
Location: Minnesota
Posts: 233
|
Need control arm sleeve
I was having the control arm bushings changed in my truck and they damaged one of the sleeves and I can't find one locally. Anyone know were one I can get one need ASAP, as I am tring to get the truck ready for the all GM car show on the 5th of June.
Thanks JC
__________________
72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
go to autozone and buy the cheapest "replacement" and just use the rubber part....I have yet to find a place that sells just the "seals".
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich |
![]() |
![]() |
![]() |
#3 |
72GMC51
Join Date: Jul 2004
Location: Minnesota
Posts: 233
|
Found what I need
The bushings are available from almost all old truck vendors and GM still stocks them. But not the sleeves you have to buy the whole bushing and remove the center metal piece and the rubber and use the sleeve, luckily they are only about 12.00 each.
JC
__________________
72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|