Need pulley bad!! Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 07-11-2005, 09:51 PM

I am needing a water pump pulley for 283 or 327 V8 with a/c. It is a 2 groove pulley with a space between them. The first 2 pics are for a 283. It is actually 2 pulleys that bolt together. A shallow pulley mounts on top of the generic single groove pulley that is on almost every non-a/c V8 from the 60's and early 70's. I need the shallow one. The third picture is of a 327 pulley. It is a single piece cast iron 3 groove pulley. I really need this one but would buy the 283 style if anyone has it. Thanks for any help!
Joshua

**JQ-72** · 07-11-2005, 09:56 PM

327

57cccc · 07-18-2005, 04:31 PM

Did you ever find your pulley? I have a 2 groove one piece, a two groove with the space and a few boxes I could dig through full of pulleys. Let me know and I can send some pictures. Do you have the bottom crank pulley that you need?

**JQ-72** · 07-19-2005, 04:49 PM

I also posted this on the 67-72 board and a member informed me that the cast style in picture #3 was carried over to 67-68. He is selling me one. I could use another (either style). Let's see what you have. Thanks
Joshua

57cccc · 07-19-2005, 05:10 PM

The first picture is a # 3790356 CH and the second with the space is a # GM 367161 BM .

07-11-2005, 09:51 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Need pulley bad!! Help! I am needing a water pump pulley for 283 or 327 V8 with a/c. It is a 2 groove pulley with a space between them. The first 2 pics are for a 283. It is actually 2 pulleys that bolt together. A shallow pulley mounts on top of the generic single groove pulley that is on almost every non-a/c V8 from the 60's and early 70's. I need the shallow one. The third picture is of a 327 pulley. It is a single piece cast iron 3 groove pulley. I really need this one but would buy the 283 style if anyone has it. Thanks for any help! Joshua Attached Images

07-11-2005, 09:56 PM	#2
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	327 Attached Images

07-19-2005, 05:10 PM	#5
57cccc Registered User Join Date: Dec 2003 Location: Washington State Posts: 9	need a pulley!!help! The first picture is a # 3790356 CH and the second with the space is a # GM 367161 BM . Attached Images __________________ 57cccc

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-18-2005, 04:31 PM	#3
57cccc Registered User Join Date: Dec 2003 Location: Washington State Posts: 9	need pulley bad help! Did you ever find your pulley? I have a 2 groove one piece, a two groove with the space and a few boxes I could dig through full of pulleys. Let me know and I can send some pictures. Do you have the bottom crank pulley that you need? __________________ 57cccc

07-19-2005, 04:49 PM	#4
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	I also posted this on the 67-72 board and a member informed me that the cast style in picture #3 was carried over to 67-68. He is selling me one. I could use another (either style). Let's see what you have. Thanks Joshua



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.