Braided Air Lines - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canadian trucker · 08-14-2005, 08:59 PM

Help me please I am trying to find braided hoses for my air ride. (wanna do the whole thing without plastic) Does anyone know of a good place where to get braided air lines. Any guess is also welcome.

thankx

Russell · 08-14-2005, 11:46 PM

Just be aware that braided hose is really expensive. However, you can usually find some on ebay or something

Nolowrider · 08-14-2005, 11:51 PM

Locally we have a place called Aeroquip that makes them. Try looking in the phonebook for high pressure hydraulic line fabricators. They are usally steele braided or any aircraft repair place would be able to tell you where to go. If you want the number for the place here let me know. Maybe you can give them the info and they can ship them to you, or I can ship them to you. They are expensive though.

bodydropped · 08-15-2005, 10:27 AM

got copper air line instead

Izzy · 08-15-2005, 10:33 AM

The local hydraulic place here wanted an arm and a leg to do custom length braided hoses. I would check with Russell and see what they can do. The reason most don't run it is the cost is so prohibative.

boxrodz · 08-16-2005, 01:52 AM

How bout using stainless steel braided sleeves with DOT-approved air lines? Could give you a similar look while keeping the cost down a bit.

Russell · 08-16-2005, 02:47 AM

Another thing you could consider, that may potentially be a stupid idea (I am sure someone will pipe up if it is!) Almost all GM cars with TBI have some very nice steel braided fuel lines from the Throttle Body down to the frame. Prehaps you could get some of that fuel line, along with some of the saginaw hard line fittings, put a double flare type fitting on them, and run them as your soft lines?

08-14-2005, 08:59 PM	#1
canadian trucker A day should have 30 hours. Join Date: Jul 2005 Location: BC, Canada Posts: 248	Braided Air Lines Help me please I am trying to find braided hoses for my air ride. (wanna do the whole thing without plastic) Does anyone know of a good place where to get braided air lines. Any guess is also welcome. thankx

08-14-2005, 11:46 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Just be aware that braided hose is really expensive. However, you can usually find some on ebay or something __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-15-2005, 10:27 AM	#4
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	got copper air line instead __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg

08-16-2005, 01:52 AM	#6
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	How bout using stainless steel braided sleeves with DOT-approved air lines? Could give you a similar look while keeping the cost down a bit. __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

08-16-2005, 02:47 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Another thing you could consider, that may potentially be a stupid idea (I am sure someone will pipe up if it is!) Almost all GM cars with TBI have some very nice steel braided fuel lines from the Throttle Body down to the frame. Prehaps you could get some of that fuel line, along with some of the saginaw hard line fittings, put a double flare type fitting on them, and run them as your soft lines? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-14-2005, 11:51 PM	#3
Nolowrider Senior Member Join Date: Jan 2005 Location: New Orleans Posts: 1,365	Locally we have a place called Aeroquip that makes them. Try looking in the phonebook for high pressure hydraulic line fabricators. They are usally steele braided or any aircraft repair place would be able to tell you where to go. If you want the number for the place here let me know. Maybe you can give them the info and they can ship them to you, or I can ship them to you. They are expensive though.

08-15-2005, 10:33 AM	#5
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	The local hydraulic place here wanted an arm and a leg to do custom length braided hoses. I would check with Russell and see what they can do. The reason most don't run it is the cost is so prohibative.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.